Intermatic Digital 7-Day Programmable Wall Switch Timer SS7C User Manual

Úvod

The Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer is designed to control lighting and heavy-duty loads such as fans and appliances. This timer offers precise control with up to six ON/OFF settings per day, totaling 42 settings per week. It features a digital clock, battery backup, and various programming options to suit your schedule.

Bezpečnostné informácie

POZOR: Risk of electric shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. If you are unsure about any part of these instructions, consult a qualified electrician. Do not exceed the electrical ratings of the device.

• Pred inštaláciou sa uistite, že je odpojené napájanie.
• Dodržiavajte všetky miestne a národné elektrické predpisy.
• Toto zariadenie je určené len na vnútorné použitie.

Obsah balenia

Pred začatím inštalácie skontrolujte, či sú všetky komponenty prítomné:

• Intermatic SS7C Digital Wall Switch Timer Unit
• Montážne skrutky
• Drôtené matice
• Návod na použitie (tento dokument)

Nastavenie a inštalácia

Požadované nástroje: Screwdriver, Wire Strippers, Electrical Tape.

1. Vypnúť napájanie: Locate the circuit breaker or fuse that controls the power to the switch you are replacing. Turn it OFF. Verify power is off using a voltage tester.
2. Odstrániť existujúci prepínač: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch. Note the wiring configuration (e.g., line, load, ground).
3. Wire the SS7C Timer: Connect the wires from the wall box to the SS7C timer using the provided wire nuts. Refer to the wiring diagram below for typical connections. Ensure all connections are secure.
   

   Obrázok: Predná strana view of the Intermatic SS7C Digital Wall Switch Timer. This image shows the digital display and control buttons, which are essential for programming and operation.

   • Sieťový vodič: Connect to the timer's LINE terminal.
   • Načítať drôt: Connect to the timer's LOAD terminal.
   • Zemniaci vodič: Connect to the timer's GROUND terminal.
   • Neutral Wire (if applicable): Some installations may require a neutral wire. Consult your local electrical codes.
4. Namontujte časovač: Gently push the wired timer into the wall box. Secure it with the mounting screws. Attach the wall plate.
5. Obnoviť napájanie: Turn the power back ON at the circuit breaker or fuse box. The timer display should illuminate.

Obsluha a programovanie

The SS7C timer allows for flexible programming with up to 6 ON/OFF settings per day.

1. Nastavenie aktuálneho času a dňa

1. Stlačte tlačidlo HODINY tlačidlo. Zobrazenie času bude blikať.
2. Použite HODINA a MINÚTA tlačidlá na nastavenie aktuálneho času.
3. Stlačte tlačidlo DAY tlačidlo na nastavenie aktuálneho dňa v týždni.
4. Stlačte tlačidlo HODINY again to save and exit, or wait a few seconds for it to save automatically.

2. Programming ON/OFF Events

The timer supports up to 6 ON/OFF programs per day, for a total of 42 per week.

1. Stlačte tlačidlo PROG button. The display will show "1 ON".
2. Použite HODINA, MINÚTAa DAY buttons to set the desired ON time and day(s) for Program 1. You can select specific days (e.g., M, Tu, W, Th, F, Sa, Su), weekdays (M-F), weekends (Sa-Su), or all 7 days.
3. Stlačte tlačidlo PROG znova. Na displeji sa zobrazí „1 VYPNUTÉ“.
4. Set the desired OFF time and day(s) for Program 1 using the HODINA, MINÚTAa DAY tlačidlá.
5. Pre ďalšie programy (2 ZAP/VYP až 6 ZAP/VYP) zopakujte kroky 1 – 4.
6. Po nastavení všetkých požadovaných programov stlačte HODINY pre návrat do normálnej prevádzky.

3. Manuálne prepínanie

To manually turn the connected device ON or OFF outside of programmed times, press the ON/OFF button. This will temporarily override the current program until the next scheduled ON or OFF event.

4. Random Setting Feature

The random setting feature can be activated to vary ON/OFF times slightly, creating a lived-in appearance when you are away. Consult the full manual for specific activation steps for the random feature.

Údržba

The Intermatic SS7C timer is designed for low maintenance. The internal battery backup maintains programming for up to three years, even during power failures.

• Výmena batérie: If the display becomes dim or programming is lost frequently during power outages, the internal battery may need replacement. This typically requires professional servicing or careful adherence to specific instructions not detailed here.
• Čistenie: Clean the timer's surface with a soft, damp plátno. Nepoužívajte abrazívne čistiace prostriedky ani rozpúšťadlá.

Riešenie problémov

Špecifikácie

• Značka: Intermatic
• Číslo modelu: SS7C
• Hmotnosť položky: 0.35 libier
• Počet nastavení: 7-day programmable, up to 6 ON/OFF settings per day (42 per week)
• Veľkosť obrazovky: 1.5 palca
• Farba: Biela
• Výrobca: INTERMATIC INC
• UPC: 078275056732
• ASIN: B0000BYDA2

Záruka a podpora

This Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer comes with a 1-ročná obmedzená záruka výrobcu od dátumu nákupu. Táto záruka sa vzťahuje na chyby materiálu a spracovania pri bežnom používaní.

For warranty claims, technical assistance, or further support, please contact Intermatic customer service. Keep your proof of purchase for warranty validation.

For the most up-to-date support information, please visit the official Intermatic webalebo sa pozrite na kontaktné údaje uvedené na obale produktu.