Dickson TM320 Temperature and Humidity Data Logger

1. Úvod

The Dickson TM320 is a versatile data logger designed to accurately monitor and record temperature and humidity levels. Featuring a large display for real-time readings, audio/visual alarms, and convenient data transfer options via USB and flash card, it provides essential environmental monitoring for various applications. Its user-friendly design ensures ease of use and reliable performance.

• USB Enabled Download: Easily transfer recorded data to a computer.
• Flash Memory Data Transfer Capability: Utilize flash cards for convenient data retrieval.
• Jumbo displej: Clear and easy-to-read real-time measurements.
• Jednoduché použitie: Intuitive interface for straightforward operation.

2. Bezpečnostné informácie

Please read all safety instructions before operating the device. Failure to do so may result in damage to the device or personal injury.

• Do not expose the device to extreme temperatures outside its specified operating range.
• Avoid direct contact with water or high humidity environments beyond the non-condensing range.
• Používajte iba určené zdroje napájania a príslušenstvo.
• Nepokúšajte sa zariadenie otvárať ani opravovať sami. Všetky servisné práce zverte kvalifikovanému personálu.
• Uchovávajte mimo dosahu detí.

3. Obsah balenia

Overte, či sú v balení všetky položky:

• Dickson TM320 Data Logger
• Návod na použitie (tento dokument)
• USB Cable (may be sold separately)
• SD Card (may be sold separately)
• Batteries (may be pre-installed or included)

4. Produkt skončilview

Obrázok 4.1: Predná strana View. Shows the large digital display, 'DICKSON' branding, and three control buttons: MIN/MAX, ALARM, and SAVE.

Obrázok 4.2: Strana View s portami. Illustrates the mini-USB port for data transfer and external sensor input jacks, along with ventilation for internal sensors.

Obrázok 4.3: Späť View. Displays the battery compartment cover and keyhole slots for wall mounting.

Obrázok 4.4: Hore View. Shows the slot for inserting an SD card for data storage and transfer.

5. Nastavenie

5.1. Inštalácia batérie

1. Nájdite priehradku na batériu na zadnej strane zariadenia (pozri obrázok 4.3).
2. Posunutím otvorte kryt batérie.
3. Insert the required batteries (typically AA or AAA, check compartment for type) ensuring correct polarity (+/-).
4. Bezpečne zatvorte kryt batérie.

5.2. Počiatočné zapnutie

The device should power on automatically once batteries are installed. The display will illuminate, showing current readings or a startup sequence.

5.3. Montáž zariadenia

The TM320 can be placed on a flat surface or mounted on a wall:

• Umiestnenie povrchu: Ensure the device is placed on a stable, level surface away from direct heat sources or extreme drafts.
• Montáž na stenu: Use appropriate screws (not included) with the keyhole slots on the back of the device (refer to Figure 4.3) to secure it to a wall. Ensure it is mounted in a location representative of the environment you wish to monitor.

6. Prevádzka

6.1. Pochopenie displeja

The jumbo display provides real-time information:

• Aktuálne čítanie: Shows the live temperature or humidity value.
• Jednotky: Indicates Fahrenheit (F) or Celsius (C) for temperature, and %RH for humidity.
• Indikátor batérie: Zobrazuje zostávajúcu výdrž batérie.
• CH (kanál): Indicates which channel is currently displayed (e.g., CH 1 for temperature, CH 2 for humidity).

6.2. Funkcie tlačidiel

• Tlačidlo MIN/MAX: Press to cycle through minimum, maximum, and current readings for both temperature and humidity. Hold to reset min/max values.
• Tlačidlo ALARM: Stlačte pre view current alarm settings. Hold to enter alarm setting mode (refer to section 6.4).
• Tlačidlo ULOŽIŤ: Press to manually save a data point.

6.3. Záznam údajov

The TM320 automatically logs data at a pre-set interval. Data can be viewed on the display or downloaded to a computer.

6.4. Nastavenie budíkov

The device features audio/visual alarms for out-of-range conditions.

1. Stlačte a podržte ALARM button until the alarm setting mode is activated.
2. Použite MIN / MAX button to navigate between temperature and humidity alarm settings (high/low).
3. Použite ULOŽIŤ button to adjust the alarm threshold values.
4. Stlačte tlačidlo ALARM znova pre potvrdenie a ukončenie režimu nastavenia.

6.5. Data Download (USB)

1. Connect the TM320 to your computer using a compatible USB cable (refer to Figure 4.2 for port location).
2. The device should be recognized as a removable storage device or require specific Dickson software (refer to manufacturer's website for software).
3. Follow the software instructions to download and analyze the logged data.

6.6. Data Transfer (Flash Card)

If your model supports flash card data recovery:

1. Insert a compatible SD card into the SD card slot (refer to Figure 4.4).
2. The device may automatically transfer data or require a specific button press (consult software/manual for details).
3. Remove the SD card and insert it into a computer's card reader to access the data.

7. Údržba

7.1. Upratovanie

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the sensor vents or ports.

7.2. Výmena batérie

Replace batteries when the low battery indicator appears on the display. Follow the battery installation steps in Section 5.1.

7.3. Skladovanie

Ak zariadenie dlhší čas nepoužívate, vyberte batérie a uložte ho na chladnom a suchom mieste mimo dosahu priameho slnečného žiarenia a extrémnych teplôt.

8. Riešenie problémov

9. Špecifikácie

10. Záruka a podpora

This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Dickson website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Dickson customer service through their official channels.

Dickson Official Webmiesto: www.dicksonlogger.com