Geberit PushControl Bathtub Drain and Overflow Unit Model 151.603 Instruction Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Geberit PushControl Bathtub Drain and Overflow Unit, Model 151.603. This unit is designed for bathtubs with depths ranging from 17 to 24 inches and features a 27-inch stainless steel cable for reliable operation. Please read this manual thoroughly before installation and use to ensure proper function and safety.

The Geberit PushControl system offers a convenient push-button mechanism for opening and closing the bathtub drain, providing a clean and modern aesthetic for your bathroom.

2. Bezpečnostné informácie

POZOR: Failure to follow these safety instructions could result in property damage, personal injury, or death.

• Pred začatím akýchkoľvek inštalatérskych prác vždy vypnite prívod vody.
• Počas inštalácie noste vhodné osobné ochranné prostriedky, ako sú ochranné okuliare a rukavice.
• Uistite sa, že všetky pripojenia sú bezpečné a vodotesné, aby ste predišli únikom.
• Ak si nie ste istí niektorou časťou inštalačného procesu, poraďte sa s kvalifikovaným inštalatérom.
• Udržujte malé časti mimo dosahu detí, aby ste predišli nebezpečenstvu udusenia.

3. Obsah balenia

Pred začatím inštalácie skontrolujte, či sú všetky komponenty prítomné:

• Geberit PushControl Bathtub Drain and Overflow Unit (Model 151.603)
• Brass trim (Polished Chrome)
• Nerezové sitko
• 27" stainless steel cable (Teflon coated)
• Inštalačný nástroj
• Gaskets and fasteners

4. Špecifikácie

5. Inštalácia

Before you begin, ensure you have all necessary tools and that the water supply to the bathtub is turned off. Refer to local plumbing codes for specific requirements.

5.1 Potrebné nástroje

• Inštalatérsky tmel alebo silikónový tmel
• Nastaviteľný kľúč alebo zámky kanálov
• Skrutkovač (Phillips a plochý)
• Meracia páska
• Ochranné okuliare a rukavice

5.2 Postupná inštalácia

1. Pripravte si vaňu: Ensure the bathtub drain and overflow holes are clean and free of debris. The overflow hole should be between 2" and 2-1/2" in diameter.
2. Install the Drain Shoe: Apply plumber's putty or silicone sealant around the underside of the drain flange. Insert the drain flange into the bathtub drain hole from the inside of the tub. From underneath the tub, attach the drain shoe assembly, ensuring the gasket is properly seated. Tighten securely with an adjustable wrench.
3. Nainštalujte zostavu prepadu: Position the overflow gasket on the back of the overflow plate. Insert the overflow pipe assembly into the overflow hole from the outside of the tub. Align the overflow plate with the overflow hole from the inside of the tub and secure it with the provided screw. Ensure the cable is routed correctly and not kinked.
4. Pripojte kábel: Connect the 27" stainless steel cable to both the drain stopper mechanism and the PushControl overflow trim. Follow the specific instructions provided with the unit for proper cable attachment and adjustment. The installation tool included will assist with this step.
5. Connect to Waste Pipe: Connect the 1-1/2" tubular piping of the drain and overflow unit to your existing waste pipe system. Ensure all connections are tight and sealed to prevent leaks.
6. Test na netesnosti: Fill the bathtub with water and check all connections for any signs of leakage. Operate the PushControl mechanism several times to ensure the drain stopper opens and closes smoothly.

Image 1: Geberit PushControl Bathtub Drain and Overflow Unit (Model 151.603) showing the polished chrome trim and cable assembly. This image illustrates the main components of the unit.

6. Prevádzka

The Geberit PushControl system is designed for simple and intuitive operation.

• Na uzavretie odtoku: Firmly press the center of the overflow trim plate. The drain stopper will move into the closed position, allowing the tub to fill with water.
• Otvorenie odtoku: Firmly press the center of the overflow trim plate again. The drain stopper will release, allowing water to drain from the tub.

Ensure the mechanism operates smoothly. If you experience resistance, refer to the Troubleshooting section.

7. Údržba

Regular cleaning and maintenance will ensure the longevity and proper function of your Geberit PushControl unit.

• Cleaning the Trim: Clean the polished chrome trim with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or acidic cleaners, as these can damage the finish.
• Cleaning the Drain: Periodically remove the drain stopper and clean any hair or debris that may have accumulated in the drain opening.
• Kontrola káblov: Annually inspect the stainless steel cable for any signs of wear or damage. While the cable is Teflon coated for durability, extreme conditions or improper use can cause wear.

8. Riešenie problémov

If problems persist after attempting these solutions, please contact Geberit customer support or a qualified plumber.

9. Záruka a podpora

Geberit products are manufactured to the highest quality standards and come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Geberit webstránky.

For technical assistance, replacement parts, or further support, please contact Geberit customer service:

• Webmiesto: www.geberit.com
• Zákaznícky servis: Pozrite si návod na obsluhu Geberitu. webstránka s regionálnymi kontaktnými informáciami.

Pri kontaktovaní podpory si, prosím, pripravte číslo modelu produktu (151.603) a dátum nákupu.