Používateľská príručka k prenosnému DLP projektoru InFocus IN112

1. Úvod

This manual provides essential information for the safe and efficient operation of your InFocus IN112 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

The InFocus IN112 is designed for versatile use, offering high brightness and a strong contrast ratio. It incorporates BrilliantColor technology for clear image reproduction and is 3D-ready. Its compact and lightweight design facilitates easy portability and installation.

2. Čo je v krabici

Overte si, či sú všetky nižšie uvedené položky súčasťou balenia vášho produktu:

• InFocus IN112 Projector
• Napájací kábel
• RGB cable (VGA cable)
• A/V cable (Composite Video cable)
• Bezpečnostné pokyny
• Návod na použitie (tento dokument)
• Diaľkové ovládanie

3. Projektor Overview

Obrázok 1: Hore View - Displays the control panel with buttons for power, source selection, menu navigation, and keystone adjustment, along with the focus ring for the lens.

Obrázok 2: Strana View - Shows the ventilation grilles essential for heat dissipation during operation. Ensure these are not obstructed.

Obrázok 3: Uhlové View s diaľkovým ovládaním - Illustrates the projector from an angle, highlighting the lens and the included remote control for convenient operation.

Obrázok 4: Zadná časť View - Details the various input and output ports, including power, audio in/out, video, computer (VGA), RS232, and Mini USB.

4. Nastavenie

4.1 Umiestnenie

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. The distance from the screen will determine the image size. Adjust the projector's position to achieve the desired image size and clarity.

4.2 Pripojenie napájania

1. Connect the supplied power cord to the projector's power inlet.
2. Zapojte druhý koniec napájacieho kábla do uzemnenej elektrickej zásuvky.

4.3 Pripojenie vstupných zdrojov

The IN112 projector offers multiple input options:

• VGA (Computer In 1 & 2): Use the RGB cable to connect to a computer's VGA output.
• Zložené video: Use the A/V cable to connect to devices with composite video output.
• S-Video: Connect to devices with S-Video output.
• Vstup zvuku: Connect external audio sources using a 3.5mm stereo cable.
• RS232C: For control and automation systems.
• USB B Mini: For control and firmware updates.

Pred zapnutím projektora sa uistite, že všetky káble sú bezpečne pripojené.

5. Návod na obsluhu

5.1 Zapnutie/vypnutie

• Ak chcete zapnúť, stlačte tlačidlo Sila button on the control panel or remote control. The power indicator light will illuminate.
• Ak chcete vypnúť, stlačte tlačidlo Sila znova stlačte tlačidlo. Ak sa zobrazí výzva, potvrďte vypnutie. Pred odpojením nechajte projektor vychladnúť.

5.2 Úprava obrazu

• Zameranie: Otáčajte zaostrovací krúžok na objektíve projektora, kým nebude obraz ostrý a jasný.
• Základné kamene: Použite Keystone buttons on the control panel or remote to correct trapezoidal image distortion if the projector is not perfectly perpendicular to the screen.

5.3 Výber zdroja

Stlačte tlačidlo Zdroj button on the control panel or remote control to cycle through available input sources (VGA1, VGA2, Video, S-Video).

5.4 Navigácia v ponuke

Stlačte tlačidlo Menu/Exit button to access the on-screen display (OSD) menu. Use the arrow buttons to navigate and the Vyberte or Zadajte tlačidlo na potvrdenie výberu. Stlačte Menu/Exit znova, čím zatvoríte menu.

5.5 Eko režim

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is suitable for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode compared to 5,000 hours in normal mode.

5.6 3D Content Projection

The IN112 is 3D-ready. To project 3D content, you will need compatible 3D source material, a 3D-capable player, and active 3D glasses (sold separately). Refer to your 3D source device's manual for specific setup instructions.

6. Údržba

6.1 lamp Výmena

Projektor lamp má obmedzenú životnosť. Keď lamp indikátor (Temp/Lamp) illuminates or the image brightness significantly decreases, the lamp may need replacement. The lamp door is conveniently located on the top of the projector for easy access, even when installed.

Pozor: Ensure the projector is powered off and completely cooled before attempting lamp replacement. Refer to the detailed lamp replacement instructions in the full service manual for safety and proper procedure.

6.2 Čistenie

The IN112 projector is designed without filters, eliminating the need for filter cleaning or replacement. Periodically wipe the exterior casing with a soft, dry cloth. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.

7. Riešenie problémov

8. Špecifikácie

9. Záruka a podpora

9.1 Záruka na výrobok

The InFocus IN112 projector is backed by a comprehensive warranty:

• 5-ročná obmedzená záruka na projektore.
• Plná 2-ročná záruka pokrývajúce diely a prácu.
• 6-mesačná záruka na lamp.

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official InFocus warranty documentation or visit the InFocus webstránky.

9.2 Technická podpora

For technical assistance, troubleshooting, or service inquiries, please contact InFocus customer support. Contact information can typically be found on the InFocus official webstránke alebo v priloženej dokumentácii.

10. Related Product Information (IN130 Series)

Nasledujúce video poskytuje prehľadview of features found in the InFocus IN130 Series projectors. While specific models may vary, many core functionalities and design principles are shared across InFocus projector lines, offering general insight into InFocus projector capabilities.