RAB Lighting FFLED39 Future Flood LED Light User Manual

1. Produkt skončilview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Kľúčové vlastnosti:

• Výkon: 39-watt LED
• Teplota farby: 5100K studená biela
• Životnosť: 100,000 hours based on LM-80 tests
• LED diódy: Three multi-chip 13-watt high-performance LEDs
• Optika: NEMA type 7H x 6V with Air-flow technology heatsink
• Reflektor: Semi-specular anodized aluminum
• Tesnenia: Vysokoteplotný silikón
• Dokončiť: Bronze chip and fade-resistant polyester powder coat
• Voltage: 120-volt to 277-volt operation

2. Bezpečnostné informácie

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• Elektrická bezpečnosť: Inštaláciu musí vykonať kvalifikovaný elektrikár v súlade so všetkými národnými a miestnymi elektrotechnickými predpismi. Pred inštaláciou alebo servisom sa uistite, že je napájanie odpojené ističom.
• Uzemnenie: Svietidlo musí byť riadne uzemnené, aby sa predišlo možnému úrazu elektrickým prúdom.
• Montáž: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• Prevádzková teplota: Neprevádzkujte zariadenie mimo jeho stanoveného teplotného rozsahu.
• LED diódy: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Inštalácia

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Požadované nástroje:

• Skrutkovač (Phillips a plochý)
• Kliešte pre odizolovanie
• Kliešte
• Drill (if mounting surface requires pilot holes)
• Nastaviteľný kľúč

Možnosti montáže:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Obrázok 2: Prample of a Slipfitter Mount (optional accessory)

Kroky inštalácie:

1. Odpojiť napájanie: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltage tester.
2. Pripravte montážny povrch: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. Drôtové pripojenia:
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
   • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
   • Use appropriate wire connectors and ensure all connections are secure.
4. Upevňovacie zariadenie: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. Upravte cieľ: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. Obnoviť napájanie: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Prevádzka

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Štandardná prevádzka:

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Obrázok 3: Prample of a Photocell (optional accessory)

5. Údržba

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Čistenie:

• Exteriér: Pravidelne čistite vonkajší povrch zariadenia mäkkou handričkouamp handričkou odstráňte nečistoty, prach a úlomky. Nepoužívajte abrazívne čistiace prostriedky ani rozpúšťadlá.
• Objektív: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

Kontrola:

• Pravidelne kontrolujte svietidlo, či nejaví známky poškodenia, uvoľnených spojov alebo opotrebovania.
• Uistite sa, že všetky montážne prvky sú pevné a bezpečné.
• If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

6. Riešenie problémov

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Špecifikácie

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. Záruka a podpora

Záruka výrobcu:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a 1-ročná záruka výrobcu od dátumu nákupu. Táto záruka sa vzťahuje na chyby materiálu a spracovania pri bežnom používaní a servise.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Zákaznícka podpora:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting webaktuálne kontaktné údaje nájdete na stránke.