Používateľská príručka k 2-tonovému servisnému zdviháku AFF Wrecker, model 208

Dôležité bezpečnostné informácie

Read and understand all instructions and warnings in this manual before operating this service jack. Failure to follow these instructions may result in serious injury or property damage. Keep this manual for future reference.

• Always use jack stands: Never work under a vehicle supported only by a jack. Always use appropriately rated jack stands to support the vehicle after lifting.
• Neprekračujte menovitú kapacitu: This jack has a maximum lifting capacity of 2 tons. Do not attempt to lift loads exceeding this limit.
• Use on a hard, level surface: Ensure the jack is placed on a firm, level surface capable of supporting the load. Avoid uneven or soft ground.
• Center the load: Position the jack saddle directly under the vehicle's lifting point. An off-center load can cause instability.
• Držte sa ďalej: Ensure all personnel are clear of the vehicle before and during lifting or lowering operations.
• Pred každým použitím skontrolujte: Check the jack for any signs of damage, leaks, or wear before each use. Do not use a damaged jack.
• Upozornenie 65: Tento produkt vás môže vystaviť chemikáliám vrátane olova, o ktorom je v štáte Kalifornia známe, že spôsobuje rakovinu a vrodené chyby alebo iné reprodukčné poškodenie. Pre viac informácií prejdite na www.P65Warnings.ca.gov.

Koniec produktuview

The AFF 2 Ton Wrecker Service Jack Model 208 is designed for efficient and reliable vehicle lifting. It combines robust construction with user-friendly features for both professional and home use.

Kľúčové vlastnosti

• Lightweight Anodized Aluminum Frame: Provides strength while reducing overall weight for easier portability.
• Double Pumper Technology: Features a twin hydraulic system for faster and more efficient lifting.
• Polished Plunger Pistons: Designed for a smooth surface, contributing to a longer seal life.
• Tesnenia stieračov: Prevents dirt and contaminants from entering the hydraulic system, enhancing durability.
• Front Rollers and Padded Side Handles: Facilitate easy maneuverability and transport.

Komponenty

• Zdvíhacie rameno: The primary component that raises the vehicle.
• Sedlo: Kontaktný bod so zdvíhacím bodom vozidla.
• Rukoväť: Používa sa na čerpanie zdviháka a ovládanie uvoľňovacieho ventilu.
• Kolieska/Pojazdné kolieska: Allow for easy positioning and movement of the jack.
• Hydraulická jednotka: Contains the fluid and pumping mechanism.

Pokyny na nastavenie

Rozbaľovanie

1. Opatrne vyberte zdvihák z obalu.
2. Inspect the jack for any shipping damage. If damage is found, do not use and contact your supplier immediately.
3. Uistite sa, že sú prítomné všetky komponenty uvedené v balení.

Montáž rukoväte

1. Insert the lower handle section into the handle socket on the jack.
2. Zarovnajte otvory a zaistite rukoväť pomocou dodaného čapu alebo skrutky, pričom sa uistite, že je úplne usadená a zaistená.
3. V prípade potreby pripevnite hornú časť rukoväte k spodnej časti a zaistite ju.

Initial Bleeding Procedure

Before first use, it is recommended to bleed any air from the hydraulic system to ensure proper operation.

1. Otočte vypúšťací ventil proti smeru hodinových ručičiek, aby ste ho úplne otvorili.
2. Pump the handle vigorously 10-15 times to circulate the hydraulic fluid and expel air.
3. Otočte vypúšťací ventil v smere hodinových ručičiek, aby ste ho zatvorili.
4. Test the jack by raising and lowering it a few times without a load. If operation is not smooth, repeat the bleeding procedure.

Návod na obsluhu

Lifting a Vehicle

1. Zaparkujte vozidlo na tvrdom a rovnom povrchu. Zatiahnite parkovaciu brzdu a zablokujte kolesá, ktoré zostanú na zemi.
2. Locate the manufacturer-recommended lifting points on the vehicle chassis. Consult your vehicle's owner's manual.
3. Position the jack so the saddle is directly under the lifting point. Ensure the jack is stable and not on an angle.
4. Close the release valve by turning the handle clockwise until it is firm.
5. Pump the jack handle to raise the vehicle to the desired height. Lift only high enough to place jack stands.
6. Okamžite umiestnite vhodne dimenzované zdviháky pod určené podperné body vozidla.
7. Slowly open the release valve to lower the vehicle onto the jack stands. Ensure the vehicle is securely resting on the stands before proceeding with any work.

Spustenie vozidla

1. Uistite sa, že priestor okolo vozidla je voľný.
2. Raise the vehicle slightly off the jack stands using the jack.
3. Vyberte zdviháky spod vozidla.
4. Slowly turn the release valve counter-clockwise to gradually lower the vehicle to the ground. Do not open the valve too quickly, as this can cause the vehicle to drop rapidly.
5. Keď je vozidlo úplne spustené, odstráňte zdvihák.

Údržba

Regular maintenance ensures the longevity and safe operation of your AFF Service Jack.

Všeobecná starostlivosť

• Keep the jack clean and free of dirt, grease, and debris. Wipe down external surfaces after each use.
• Store the jack in a dry, protected area when not in use.
• Do not expose the jack to extreme temperatures or corrosive environments.

Hydraulic Fluid Check/Refill

Check the hydraulic fluid level periodically. Use only high-quality hydraulic jack oil.

1. Lower the jack completely.
2. Locate and remove the oil filler plug.
3. The fluid level should be just below the filler hole. If low, add hydraulic jack oil until the correct level is reached.
4. Bezpečne nasaďte späť plniacu zátku.

Mazanie

Lubricate all moving parts and pivot points with light machine oil periodically to ensure smooth operation.

Riešenie bežných problémov

Špecifikácie

Záruka a podpora

Obmedzená záruka

AFF products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official AFF webstránky. Uschovajte si doklad o kúpe ako doklad o kúpe pre prípadné reklamácie.

Zákaznícka podpora

If you have any questions regarding the operation, maintenance, or troubleshooting of your AFF 2 Ton Wrecker Service Jack, please contact AFF customer support. Contact information can typically be found on the product packaging or the official AFF webstránky.