1. Produkt skončilview
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P6064-31 1-Light Wall Lantern. This fixture features an oval form factor with a grid overlay and etched glass shades, finished in black. It is designed for both outdoor and suitable indoor applications.
Obrázok 1: Predná strana view of the Progress Lighting P6064-31 Wall Lantern.
2. Bezpečnostné informácie
POZOR: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation or servicing. All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.
- Neprekračujte maximálny watttage špecifikované pre žiarovku.
- So sklenenými komponentmi manipulujte opatrne, aby ste predišli ich rozbitiu.
- Uchovávajte horľavé materiály mimo dosahu svietidla.
3. Obsah balenia
Pred začatím inštalácie skontrolujte, či sú všetky komponenty prítomné:
- Wall Lantern Fixture (P6064-31)
- Etched Glass Shade
- Súprava montážneho hardvéru
- Inštalačný list
4. Špecifikácie
| Funkcia | Detail |
|---|---|
| Číslo modelu | P6064-31 |
| Značka | Progresívne osvetlenie |
| Typ dokončenia | Finished (Black) |
| Rozmery produktu | 16.13 cm D x 9.25 cm Š x 6.13 cm V |
| Hmotnosť položky | 4.63 libier |
| Typ montáže | odstávajúce |
| Úroveň odolnosti voči vode | Odolný voči vode |
| Svetelný zdroj Wattage | 100 wattov (max.) |
| Voltage | 120 voltov |
| Maximálny svetelný výkon | 1600 XNUMX lúmenov |
| Typ svetelného zdroja | Incandescent (Medium Base) |
| Materiál | hliník |
Figure 2: Product dimensions for the P6064-31 Wall Lantern.
5. Návod na inštaláciu
5.1 Predinštalácia
- Vypnite napájanie na ističi alebo poistkovej skrinke.
- Carefully unpack the fixture and inspect for any damage.
- Uistite sa, že sú prítomné všetky časti uvedené v časti 3.
5.2 Sizing and Placement Guidance
Proper sizing and placement are crucial for optimal illumination and aesthetic appeal. Refer to the video below for visual guidance.
Video: Outdoor Lighting - Sizing and Selection. This video provides guidance on selecting the appropriate size and mounting height for outdoor lighting fixtures, including wall lanterns, for entryways and garages.
- Veľkosť svietidla: For entrances and garages, select fixtures that measure 1/4 to 1/3 of the door's height.
- Montážna výška: Mount fixtures at eye level, approximately 5.5 to 6 feet from the ground to the fixture's center.
- Entrance Doors: Mount lights on either side of the door, 8 to 10 feet apart.
- Garage Doors: For a one-car garage, use a single wall lantern. For two or more car garages, mount lights on either side of the doors, or across the top of the doors for even illumination.
Obrázok 3: Prample of wall lantern placement for an entryway.
Obrázok 4: Prample of wall lantern placement for a garage.
5.3 Zapojenie a montáž
- Pripevnite montážnu konzolu k spojovacej skrinke pomocou dodaných skrutiek.
- Connect the fixture's wires to the house wires: black to black (live), white to white (neutral), and bare copper (ground) to the house ground wire and the mounting bracket. Secure connections with wire nuts.
- Opatrne zasuňte všetky vodiče do spojovacej skrinky.
- Align the fixture with the mounting bracket and secure it with the provided screws or nuts.
5.4 Inštalácia žiarovky
- Insert one medium base incandescent bulb (not included) into the socket.
- Neprekračujte maximálny watttage 100 wattu.
- Install the etched glass shade by carefully placing it over the bulb and securing it according to the specific instructions on the included installation sheet.
6. Návod na obsluhu
Once installed and powered, operate the wall lantern using the standard wall switch connected to the fixture's circuit. Ensure the bulb is correctly installed and the power is on at the circuit breaker.
7. Údržba
Pre zachovanie vzhľadu a funkčnosti vášho zariadenia:
- Čistenie: Pred čistením vypnite napájanie. Utrite zariadenie mäkkou handričkou.amp handričkou. Nepoužívajte abrazívne čistiace prostriedky ani rozpúšťadlá, pretože môžu poškodiť povrchovú úpravu alebo sklo.
- Výmena žiarovky: Turn off power before replacing the bulb. Allow the bulb to cool completely. Replace with a new medium base incandescent bulb, not exceeding 100 Watts.
8. Riešenie problémov
If your fixture is not operating correctly, refer to the following common issues:
| Problém | Možná príčina | Riešenie |
|---|---|---|
| Svetlo sa nerozsvieti | Žiadne napájanie zariadenia | Check circuit breaker, wall switch, and wiring connections. |
| Žiarovka je vypálená | Vymeňte žiarovku. | Uistite sa, že žiarovka je pevne zaskrutkovaná. |
| Blikajúce svetlo | Uvoľnené pripojenie žiarovky alebo kabeláže | Tighten bulb. Check wiring connections (with power off). |
| Fixture is dim | Nesprávna žiarovka wtage | Uistite sa, že žiarovka je vo wattetage is appropriate and not too low. |
9. Záruka a podpora
This Progress Lighting fixture is covered by a 1-ročná obmedzená záruka. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.
For warranty claims or technical assistance, please refer to the contact information provided on your purchase receipt or visit the official Progress Lighting webstránky.