Proplus H21

Proplus H21 Kitchen and Bathroom Faucet Handle for Delta Faucets

Návod na použitie

1. Produkt skončilview

The Proplus H21 is a hot/cold handle assembly designed as a replacement part for Delta faucets, specifically compatible with RP23498 models. This handle set provides a functional and aesthetic upgrade or replacement for worn or damaged faucet handles in both kitchen and bathroom applications. It features an easy-to-install design for convenient maintenance.

Proplus H21 Hot and Cold Faucet Handles

Image 1: A pair of clear acrylic Proplus H21 faucet handles. The left handle is marked 'H' for hot, and the right handle is marked 'C' for cold. Both handles feature a fluted design.

2. Bezpečnostné informácie

  • Always turn off the main water supply to the faucet before beginning any installation or maintenance work to prevent water damage.
  • Počas inštalácie noste vhodné osobné ochranné prostriedky, ako napríklad ochranné okuliare.
  • Uistite sa, že všetky pripojenia sú bezpečné, aby ste predišli únikom.
  • Ak si nie ste istí niektorým krokom, poraďte sa s kvalifikovaným inštalatérom.

3. Obsah balenia

Pred začatím inštalácie skontrolujte, či sú všetky komponenty prítomné:

  • 1 x Hot Faucet Handle (Acrylic, Off White with 'H' marking)
  • 1 x Cold Faucet Handle (Acrylic, Off White with 'C' marking)

4. Nastavenie (Inštalácia)

Follow these steps to install your new Proplus H21 faucet handles:

  1. Vypnite prívod vody: Locate the water shut-off valves under the sink for both hot and cold water lines, and turn them off completely. If individual valves are not present, turn off the main water supply to your home.
  2. Remove Old Handles: Depending on your Delta faucet model, you may need to pry off a decorative cap to expose a screw. Use a screwdriver to loosen and remove the screw, then pull the old handle straight up and off the faucet stem. Repeat for both handles.
  3. Clean Faucet Area: Clean any mineral deposits or debris from the faucet base and stems.
  4. Install New Handles: Place the new Proplus H21 handles onto the corresponding hot and cold faucet stems. Ensure the handles are oriented correctly (e.g., 'H' for hot, 'C' for cold).
  5. Bezpečné rukoväte: Insert the screws into the handles and tighten them securely with a screwdriver. Do not overtighten, as this can damage the handles. If applicable, replace any decorative caps.
  6. Obnoviť dodávku vody: Pomaly znova otvorte ventily prívodu teplej a studenej vody.
  7. Skontrolujte netesnosti: Turn on the faucet and check for any leaks around the base of the handles or connections. If leaks occur, turn off the water supply and re-check the handle installation and connections.

5. Návod na obsluhu

To operate your faucet with the new Proplus H21 handles:

  • Zapnutie/vypnutie: Otočením rukoväte proti smeru hodinových ručičiek zapnete vodu a otočením v smere hodinových ručičiek ju vypnete.
  • Nastavenie teploty: Use the handle marked 'H' for hot water and 'C' for cold water. Adjust the desired water temperature by mixing hot and cold water to your preference.

6. Údržba

To ensure the longevity and appearance of your Proplus H21 faucet handles:

  • Čistenie: Clean the handles regularly with a soft, damp cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can scratch or damage the acrylic and chrome finish.
  • Uťahovanie: Periodically check the handles for looseness. If a handle feels loose, gently tighten the retaining screw (under the decorative cap, if applicable) with a screwdriver. Do not overtighten.

7. Riešenie problémov

ProblémMožná príčinaRiešenie
Rukoväť je uvoľnenáUpevňovacia skrutka je uvoľnená.Remove decorative cap (if present) and tighten the screw. Do not overtighten.
Z rukoväte uniká vodaImproper installation or worn O-rings/gaskets (not part of handle assembly).Ensure handle is properly seated and screw is tightened. If leak persists, the issue may be with internal faucet components (e.g., valve stem, O-rings) which are separate from the handle and may require professional plumbing service.
Handle does not turn smoothlyMineral buildup or internal faucet issue.Clean around the handle base. If the issue persists, it likely indicates a problem with the faucet's internal valve mechanism, not the handle itself.

8. Špecifikácie

  • Číslo modelu: H21
  • Materiál: Acrylic (handle body), Brass (handle material)
  • Vonkajšia úprava: Chrome
  • Farba: Off White
  • Kompatibilita: Designed for Delta faucets (RP23498)
  • Hmotnosť položky: Približne 1.2 libier
  • Špeciálna funkcia: Jednoduchá inštalácia

9. Záruka a podpora

This product comes with a limited warranty. For specific warranty details, claims, or technical support, please contact Proplus customer service directly. Keep your purchase receipt as proof of purchase.

Značka: Proplus

For further assistance, please refer to the official Proplus webalebo kontaktujte ich zákaznícku podporu.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.