Používateľská príručka LED núdzového značenia Philips Lighting ER55LD3WR

Úvod

This manual provides essential information for the safe and efficient use of your Philips Lighting ER55LD3WR LED Exit Sign. Please read these instructions carefully before installation and operation, and retain them for future reference. This product is designed for commercial lighting applications, specifically as a lighted exit sign.

Bezpečnostné informácie

• Always disconnect power before installing or servicing the unit.
• Inštaláciu by mal vykonať kvalifikovaný elektrikár v súlade s národnými a miestnymi elektrotechnickými predpismi.
• Nepoužívajte tento výrobok na iné účely, než na ktoré je určený.
• Uistite sa, že všetky pripojenia sú bezpečné a správne izolované.
• Chráňte pred vodou a nadmernou vlhkosťou.

Obsah balenia

Pred začatím inštalácie skontrolujte, či sú všetky komponenty prítomné:

• Philips Lighting ER55LD3WR LED Exit Sign unit
• Montážny materiál (skrutky, kotvy)
• Návod na použitie (tento dokument)

Nastavenie a inštalácia

The Philips Lighting ER55LD3WR LED Exit Sign is designed for wall mounting. Ensure the mounting surface is suitable to support the weight of the unit.

1. Pripravte si miesto inštalácie: Disconnect power to the circuit where the exit sign will be installed.
2. Montáž:
   • Identify the desired wall mounting location.
   • Use the provided mounting hardware to securely attach the exit sign to the wall. Ensure the unit is level.
3. Zapojenie:
   • Connect the building's 120V AC power supply to the corresponding wires on the exit sign. Refer to the wiring diagram inside the unit's housing for specific connections.
   • Zabezpečte správne uzemnenie.
   • Connect the internal battery (if not pre-connected). This is crucial for emergency operation.
4. Záverečné zhromaždenie: Secure any covers or diffusers.

Obrázok 1: Predná strana view of the Philips Lighting ER55LD3WR LED Exit Sign. This image shows the white housing with the red "EXIT" lettering illuminated, indicating its primary function as an emergency egress indicator.

Návod na obsluhu

Once installed and power is restored, the Philips Lighting ER55LD3WR LED Exit Sign will operate automatically.

• Normálna prevádzka: When AC power is present, the "EXIT" sign will be illuminated by the internal LEDs. The green indicator light on the unit will be ON, signifying operating status.
• Núdzová prevádzka: In the event of an AC power failure, the unit will automatically switch to battery backup, illuminating the "EXIT" sign for a specified duration (typically 90 minutes).
• Testovacie tlačidlo: A test button is provided on the unit to verify emergency operation. Press and hold the "Push to Test" button to simulate an AC power failure. The sign should remain illuminated, and the green indicator light will blink, indicating testing. Release the button to return to normal operation.

Obrázok 2: Detailný záber view of the test button and indicator lights on the Philips Lighting ER55LD3WR LED Exit Sign. The green indicator shows operating status (ON for ready, Blinking for testing). The red indicator shows service alerts such as battery, charger board, transformer, or LED strip faults.

Údržba

Regular maintenance ensures the reliability and longevity of your LED Exit Sign.

• Mesačný test: Press the "Push to Test" button for at least 30 seconds to ensure the battery backup system is functioning. The sign should remain illuminated.
• Ročný test: Disconnect AC power to the unit for 90 minutes to verify the battery can sustain emergency illumination for the required duration.
• Čistenie: Vonkajšiu časť jednotky vyčistite jemným, damp plátno. Nepoužívajte abrazívne čistiace prostriedky ani rozpúšťadlá.
• Výmena batérie: The internal battery has a limited lifespan. If the unit fails to hold a charge or the red "Battery fault" indicator illuminates, the battery may need replacement. Contact qualified service personnel for battery replacement.

Riešenie problémov

Bežné problémy a ich riešenia nájdete v nasledujúcej tabuľke.

Špecifikácie

Záruka a podpora

For warranty information or technical support, please contact Philips Lighting customer service. Keep your purchase receipt as proof of purchase.

Výrobca: Osvetlenie Philips

Webmiesto: Navštívte obchod PHILIPS na Amazone