M-Wave M30HCW Bicycle Computer

1. Úvod

Thank you for choosing the M-Wave M30HCW Wireless Bicycle Computer. This device is designed to enhance your cycling experience by providing comprehensive data about your rides. It features wireless transmission for a clean setup and a wide range of functions to track your performance and progress. Please read this manual carefully before installation and use to ensure optimal performance and longevity of your device.

Image 1.1: M-Wave M30HCW Bicycle Computer. This image displays the main unit of the M-Wave M30HCW bicycle computer, showcasinjeho kompaktný dizajn a prehľadný displej.

2. Bezpečnostné informácie

• Always prioritize road safety. Do not operate the computer or adjust settings while cycling in traffic.
• Ensure the computer is securely mounted to prevent it from detaching during your ride.
• Batérie uchovávajte mimo dosahu detí. Pri požití okamžite vyhľadajte lekársku pomoc.
• Batérie zlikvidujte v súlade s miestnymi predpismi. Nespaľujte.
• The device has an Ingress Protection rating of IP44, meaning it is protected against splashing water from any direction. It is not designed for submersion.

3. Obsah balenia

Overte, či sú v balení všetky položky:

• M-Wave M30HCW Cyclocomputer Unit
• Wireless Speed/Cadence Sensor
• Magnet kolesa
• Mounting Bracket (for handlebar or stem)
• Montážne pásky/pásky
• CR2 Batteries (4 required, included)

4. Nastavenie

4.1. Inštalácia batérie

1. Open the battery compartment on the back of the cyclocomputer unit and the wireless sensor.
2. Insert the CR2 batteries, ensuring correct polarity (+/-).
3. Bezpečne zatvorte priehradky na batérie.

4.2. Mounting the Cyclocomputer

The M-Wave M30HCW features tool-free mounting for quick installation.

1. Attach the mounting bracket to your bicycle's handlebar or stem using the provided ties or bands. Ensure it is firmly secured and positioned for easy viewing.
2. Slide the cyclocomputer unit onto the mounting bracket until it clicks into place.

4.3. Mounting the Wireless Sensor and Magnet

1. Attach the wireless sensor to the front fork of your bicycle, ensuring it is aligned with the wheel spokes.
2. Mount the wheel magnet to a spoke on the front wheel. Position the magnet so it passes within 5mm of the sensor as the wheel rotates.
3. Ensure the sensor and magnet are securely fastened and do not interfere with wheel rotation or braking.

4.4. Počiatočná konfigurácia

After battery installation, the computer will typically prompt you for initial settings. Use the buttons (usually MODE and SET) to navigate and confirm selections.

• Jednotky: Select between metric (km/h, km) and imperial (mph, miles) units.
• Veľkosť kolies: Input your wheel circumference in millimeters (mm). Refer to your bicycle tire for this value or measure it accurately. This is crucial for accurate speed and distance readings.
• čas: Nastavte aktuálny čas (24-hodinový alebo 12-hodinový formát).
• Hmotnosť: Enter your body weight for calorie calculation.

5. Návod na obsluhu

The M-Wave M30HCW features an LED backlit display for easy reading and is operated via buttons, typically located on the front or bottom of the unit.

5.1. Základné funkcie

The computer automatically powers on and off. When you start cycling, it will activate and begin recording data. When stationary, it will enter a power-saving mode.

• Aktuálna rýchlosť: Zobrazuje vašu rýchlosť jazdy na bicykli v reálnom čase.
• Priemerná rýchlosť: Shows the average speed for your current ride.
• Maximálna rýchlosť: Records the highest speed achieved during your ride.
• Vzdialenosť cesty: Measures the distance covered in the current ride.
• Počítadlo kilometrov: Tracks the total accumulated distance.
• Čas jazdy: Records the duration of your current ride.
• Kadencia: Measures your pedaling revolutions per minute (RPM).
• výškomer: Provides altitude measurements for climb tracking.
• Heart Rate Monitor/Alarm: (If applicable, requires compatible HR sensor, not included with base unit) Monitors heart rate and can alert if thresholds are exceeded.
• Spotreba kalórií: Estimates calories burned based on ride data and user weight.
• teplomer: Zobrazuje okolitú teplotu.

5.2. Obsluha tlačidla

Typically, the computer will have one or two buttons for navigation and selection:

• Tlačidlo MODE: Press briefly to cycle through different display modes (e.g., speed, distance, time). Press and hold to enter settings or reset trip data.
• Tlačidlo SET: Used to confirm selections or adjust values within settings menus.

Refer to the on-screen prompts for specific button functions during setup and operation.

6. Údržba

• Čistenie: Počítačovú jednotku a senzor utrite mäkkou handričkouamp plátno. Nepoužívajte abrazívne čistiace prostriedky ani rozpúšťadlá.
• Odolnosť voči vode: The device is IP44 rated, protecting it from splashing water. Avoid high-pressure washing or submerging the unit.
• Výmena batérie: Replace batteries when the low battery indicator appears on the display. Ensure proper battery type and polarity.
• Ukladací priestor: If storing the bicycle for an extended period, remove the batteries from the computer and sensor to prevent leakage.

7. Riešenie problémov

8. Špecifikácie

9. Záruka a podpora

For warranty information and technical support, please refer to the documentation provided with your purchase or contact M-Wave customer service directly. Keep your proof of purchase for any warranty claims.