1. Produkt skončilview
The hansgrohe Talis Select E 110 is a single-lever basin mixer faucet designed for modern bathrooms. It features ComfortZone 110, providing ample space between the spout and the basin. The faucet incorporates a Select cartridge for intuitive water flow and temperature control, along with an adjustable temperature limitation for safety. It is equipped with a G 1¼ pop-up waste set and is suitable for instantaneous water heaters.
- Model: 71750000
- Dokončiť: Chrome
- ComfortZone: 110
- Projekcia: 112 mm
- Typ spreja: Normálny sprej
- Prietok: 5 l/min
- Náplň: Select cartridge with temperature adjustment
- Waste Set: G 1¼ pop-up waste set
- Typ pripojenia: G 3/8 connection hoses, DN15
2. Bezpečnostné informácie
Please read this manual carefully before installation and use. Retain it for future reference. Installation should be performed by a qualified professional in accordance with local plumbing and building codes. Ensure all water supply lines are turned off before beginning installation. Avoid using abrasive cleaners or solvents on the faucet's surface, as this may damage the finish.
3. Obsah balenia
Pred začatím inštalácie skontrolujte, či sú všetky komponenty prítomné:
- hansgrohe Talis Select E 110 Basin Vodovodný kohútik
- G 1¼ Pop-up Waste Set
- Connection Hoses (G 3/8)
- Montážny hardvér
- Návod na inštaláciu (tento návod)
4. Nastavenie a inštalácia
This faucet is designed for deck-mount, single-hole installation. Refer to the diagram below for critical dimensions and connection details.
Obrázok 1: Technical diagram showing the dimensions and connections of the hansgrohe Talis Select E 110 basin mixer. Key dimensions include a total height of 178 mm from the deck to the top of the faucet, a maximum deck thickness of 40 mm, a spout projection of 112 mm, and a spout height of 104 mm. The mounting hole diameter is Ø 34 mm, and the connection hoses are G 3/8. The total length of the under-deck components is approximately 370 mm.
4.1 Kroky pred inštaláciou
- Turn off the main water supply to prevent leaks.
- Pre ľahký prístup uvoľnite priestor pod drezom.
- Ensure the mounting surface is clean and flat. The required mounting hole diameter is Ø 34 mm.
4.2 Inštalácia batérie
- Insert the faucet body into the mounting hole on the basin alebo dosku.
- Spod basin, secure the faucet using the provided mounting hardware (washer and nut). Tighten firmly but do not overtighten.
- Connect the hot and cold water supply lines to the G 3/8 connection hoses extending from the faucet. Ensure proper sealing with appropriate tools.
- Install the G 1¼ pop-up waste set according to its specific instructions, connecting it to the faucet's pull rod mechanism.
4.3 Temperature Limitation Adjustment
The Select cartridge allows for adjustable temperature limitation. Consult the detailed instructions provided with the cartridge for specific steps on how to set the maximum hot water temperature, if desired, to prevent scalding.
5. Návod na obsluhu
The Talis Select E 110 faucet features a user-friendly Select cartridge for water control.
- Prietok vody: Press the button on top of the faucet to turn the water flow on or off.
- Kontrola teploty: Rotate the handle to adjust the water temperature. Turn left for hotter water and right for colder water.
- Pop-up Waste: Use the pull rod located at the back of the faucet to open and close the basin's drain stopper.
6. Údržba
6.1 Čistenie kohútika
To maintain the polished chrome finish, clean the faucet regularly with a soft cloth and a mild, non-abrasive cleaner. Avoid cleaners containing alcohol, ammonia, or abrasive particles, as these can damage the surface. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
6.2 Údržba prevzdušňovača
Periodically unscrew the aerator from the spout and clean any mineral deposits or debris. This helps maintain optimal water flow and spray pattern. Reinstall the aerator securely.
6.3 Údržba kazety
If you experience issues with water flow or temperature control, the Select cartridge may need servicing. This typically involves cleaning or replacement. It is recommended to contact a qualified plumber for cartridge maintenance.
7. Riešenie problémov
| Problém | Možná príčina | Riešenie |
|---|---|---|
| Nízky prietok vody | Upchatý prevzdušňovač; čiastočne zatvorené uzatváracie ventily; nečistoty v prívodných potrubiach. | Vyčistite prevzdušňovač. Uistite sa, že uzatváracie ventily sú úplne otvorené. Prepláchnite prívodné potrubia. |
| Únik z výtoku | Opotrebovaná kazeta; uvoľnené spoje. | Check and tighten connections. Replace the cartridge if necessary (professional recommended). |
| Nekonzistentná teplota vody | Faulty cartridge; issues with water heater. | Check water heater settings. Consider cartridge replacement (professional recommended). |
| Water not turning on/off | Faulty Select button/cartridge. | Contact hansgrohe support or a qualified plumber for inspection and repair. |
8. Špecifikácie
- Značka: hansgrohe
- Číslo modelu: 71750000
- Typ montáže: Montáž na plošinu
- Typ inštalácie: Jednoduchá diera
- Typ dokončenia: Leštené
- Farba: Chrome
- Materiál: Ceramic (for cartridge/handle components)
- Typ rukoväte: Push Button (Select)
- Hmotnosť položky: 1.75 kg
- Prietok: 5 l/min
- Výtoková projekcia: 112 mm
- ComfortZone: 110
- Veľkosť pripojenia: DN15
- Pripojovacie hadice: G 3/8
- Waste Set: G 1¼ Pop-up
- Vhodné pre: Instantaneous water heaters
9. Záruka a podpora
For detailed warranty information, please refer to the official hansgrohe website or contact hansgrohe customer service. Keep your proof of purchase for warranty claims. For technical support, spare parts, or service inquiries, please contact hansgrohe directly through their official channels.
hansgrohe Contact Information:
- Navštívte oficiálne predajne hansgrohe webstránka s regionálnymi kontaktnými údajmi.
- Refer to the packaging or product documentation for specific customer service phone numbers.