EPEVER MPPT Solar Charge Controller Tracer A 3210AN User Manual

1. Úvod

The EPEVER Tracer A 3210AN MPPT Solar Charge Controller is an advanced Maximum Power Point Tracking (MPPT) controller designed for off-grid solar systems. It efficiently manages power flow from your solar panels to your battery bank, ensuring optimal charging and extending battery life. This model includes the MT-50 Remote Meter for convenient monitoring and parameter setting, along with a Remote Temperature Sensor (RTS) for accurate temperature compensation.

Figure 1: EPEVER 30A MPPT Solar Charge Controller with included accessories.

2. Kľúčové vlastnosti

• Tracer3210AN: 12V/24V battery system auto-identifying. Max Input 100V. Max. PV input power: 12V/390W, 24V/780W.
• Optimalizované nabíjanie: Obsahuje 4-stage battery charging process (Bulk, Boost, Float, and Equalization) and temperature compensation for extended battery life and improved system performance.
• Všestranná podpora batérií: Compatible with 4 types of battery charging and discharging: Lead-acid (Sealed, Gel, Flooded), Lithium/LiFePO4, and User-defined. User mode allows custom charging parameters.
• Režimy riadenia zaťaženia: Includes four load control modes: manual mode, light ON/OFF, light On+ Timer, and test mode.
• Monitoring & Control: Supports PC (Windows only) monitoring and the Remote Meter MT50 for real-time data viewa nastavenie parametrov.
• Negative Grounded: Designed with negative grounding for enhanced system compatibility.

3. Obsah balenia

Po otvorení balenia skontrolujte, či sú všetky komponenty prítomné a v dobrom stave:

• EPEVER Tracer A 3210AN MPPT Solar Charge Controller
• MT-50 Remote Meter with communication cable (CC-RS485-RS485-200U-MT)
• Remote Temperature Sensor Cable (RTS300R47K3.81A)
• User Manual for the controller
• User Manual for the MT-50 Remote Meter
• Montážne skrutky a hmoždinky
• Certifikát kvality

The MT-50 Remote Meter provides monitoring and setting parameters, battery type selection, and is compatible with various EPEVER controllers. The Remote Temperature Sensor (3M cable) allows the charge controller to shut off and stop charging the battery based on temperature, optimizing battery health.

Figure 2: MT-50 Remote Meter and Remote Temperature Sensor Cable.

4. Nastavenie a inštalácia

Proper installation is crucial for the safe and efficient operation of your solar charge controller. Always read the entire installation instructions before beginning. The wiring steps must be followed in the correct order to prevent damage to the controller or other components.

4.1 Wiring Order

Krok pripojenia:

1. Connect the Battery.
2. Connect the Load.
3. Connect the Solar Panel (PV array).

Disconnecting Step:

1. Odpojte solárny panel (FV pole).
2. Odpojte záťaž.
3. Odpojte batériu.

Ensure that the "+" and "-" poles of all wires are connected correctly to their respective terminals. The solar panel and battery terminals support 10mm² / 8AWG wires, and the load terminals support 10mm² / 8AWG wires.

Obrázok 3: Detailný view of controller terminals for Solar Panel, Battery, Load, Temperature Sensor, and Communication Port.

Figure 4: Comprehensive wiring diagram for the solar charge controller in a typical system setup.

4.2 Inštalačný videosprievodca

For a visual step-by-step guide on connecting your EPEVER Tracer-AN controller with the MT50 remote meter and RTS, please watch the official installation video below. This video demonstrates the unboxing, component identification, and correct wiring sequence.

5. Obsluha ovládača

The Tracer A 3210AN controller features an LCD display and two buttons (SELECT and ENTER) for basic operation and parameter viewing. The MT-50 Remote Meter offers more comprehensive monitoring and advanced parameter settings.

5.1 Obsluha LCD displeja

Use the SELECT button to cycle through different display screens (PV parameters, Battery parameters, Load parameters). Use the ENTER button to confirm selections or enter setting modes.

Figure 5: Controller LCD display showing various system parameters.

5.2 MT-50 Remote Meter Operation

The MT-50 remote meter provides a more user-friendly interface for monitoring and configuring the controller. It displays real-time data for solar panel voltagprúd, objem batérietage/current/temperature, and load status. You can also access a menu interface to adjust various control parameters.

Setting Lithium Battery Parameters via MT-50:

To set the battery type to Lithium (User-defined) and adjust related parameters:

1. Choose 'Control Para' from the main menu.
2. Press 'OK' to enter.
3. Navigate to 'Batt. Type' and press 'OK'.
4. Use the up/down arrows to select 'User' for Lithium battery.
5. Go on to adjust specific parameters like Over Volt. Disc., Charge Limit, Boost Charge, Float Charge, Low Volt. Disc., and Discharge Limit according to your Lithium battery's specifications.
6. Finally, press 'OK' and 'Save' to apply the changes.

6. Údržba

Regular maintenance ensures the longevity and optimal performance of your solar charge controller. Perform the following checks periodically:

• Vizuálna kontrola: Check for any loose connections, damaged wiring, or signs of corrosion.
• Čistota: Keep the controller and its terminals clean and free from dust and debris. Use a dry cloth for cleaning.
• Vetranie: Ensure that the controller's heat sink is not obstructed and has adequate airflow for proper cooling.
• Kontrola parametrov: Periodically verify that the battery charging parameters are correctly set, especially after any system changes or power outages.

7. Riešenie problémov

If you encounter issues with your EPEVER solar charge controller, consider the following common troubleshooting steps:

• Bez displeja/napájania: Check all battery connections and ensure the battery voltage is within the controller's operating range. Verify the fuse (if external) is intact.
• Žiadne nabíjanie: Confirm solar panel connections are secure and receiving adequate sunlight. Check PV voltage on the display. Ensure battery voltage is not already at full charge.
• Zaťaženie nefunguje: Check load connections and ensure the load is not exceeding the controller's maximum current rating. Verify the load control mode is set correctly (e.g., manual ON).
• Kódy chýb: Refer to the controller's user manual for specific error codes displayed on the LCD or MT-50 and their corresponding solutions.
• Problémy s teplotou: Ensure the temperature sensor is properly connected and placed near the battery for accurate readings.

If the problem persists after performing these checks, please contact EPEVER customer support for further assistance.

8. Špecifikácie

Figure 6: Product dimensions of the solar charge controller.

Figure 7: Comparison table of EPEVER Tracer models.

9. Záruka a podpora

EPEVER products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included in your product packaging or visit the official EPEVER website. In case of any technical issues or questions, please contact EPEVER customer support. Ensure you have your product model and serial number ready for faster service.

Additional protection plans may be available for purchase from authorized retailers, offering extended coverage beyond the standard manufacturer's warranty.