Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer User Manual

1. Úvod

This manual provides essential information for the safe and efficient operation of your Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This printer is designed for various label printing applications, offering both thermal transfer and direct thermal printing capabilities at 203 dpi resolution. It features an LCD display for easy navigation, a tear-off function, a real-time clock, and multiple connectivity options including USB 2.0, two USB host ports, and LAN.

Figure 1: Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This image shows the compact desktop printer with its LCD display and label output slot.

2. Bezpečnostné informácie

Please read all safety instructions before operating the printer to prevent injury or damage to the device. Keep this manual for future reference.

• Používajte iba napájací kábel dodaný s tlačiarňou.
• Nevystavujte tlačiareň vode ani nadmernej vlhkosti.
• Uistite sa, že tlačiareň je umiestnená na stabilnom a rovnom povrchu.
• Zabráňte zablokovaniu vetracích otvorov.
• Disconnect power before cleaning or servicing the printer.
• Nepokúšajte sa tlačiareň otvárať ani opravovať sami. Obráťte sa na kvalifikovaný servisný personál.

3. Obsah balenia

Overte, či sú v balení všetky položky:

• Intermec PC43TB01100201 Printer Unit
• Napájací kábel USA
• Stručný návod na obsluhu (nie je súčasťou tejto príručky)
• Software/Driver CD (may vary by package)

4. Nastavenie

4.1 Vybalenie a umiestnenie

1. Opatrne vyberte tlačiareň z obalu.
2. Place the printer on a flat, stable surface with adequate ventilation.
3. Ensure easy access to power outlets and computer ports.

4.2 Pripojenie napájania

1. Connect the supplied US power cord to the printer's power input.
2. Zapojte druhý koniec napájacieho kábla do uzemnenej elektrickej zásuvky.

4.3 Pripojenie k počítaču

The PC43TB01100201 printer supports USB and LAN connectivity.

• USB pripojenie: Connect a USB cable (not always included) from the printer's USB 2.0 port to an available USB port on your computer.
• LAN pripojenie: Connect an Ethernet cable (not always included) from the printer's LAN port to your network router or switch.

4.4 Loading Media (Labels/Ribbon)

Refer to the printer's internal diagrams or quick start guide for specific instructions on loading labels and, if using thermal transfer, the ribbon. Ensure the media is correctly aligned for proper printing.

• Otvorte kryt tlačiarne.
• Place the label roll onto the media supply spindle.
• Feed the labels through the media guides.
• If using thermal transfer, install the ribbon according to the printer's instructions.
• Zatvorte kryt tlačiarne.

5. Návod na obsluhu

5.1 Zapnutie/vypnutie

• Zapnutie: Press the power button located on the printer. The LCD display will illuminate.
• Vypnutie: Stlačte a podržte tlačidlo napájania, kým sa tlačiareň nevypne.

5.2 Používanie LCD displeja

The LCD display provides status information and allows for configuration changes. Navigate through menus using the control buttons (Push Button Controller Type) adjacent to the display.

• View printer status and error messages.
• Adjust settings such as print darkness, speed, and media type.
• Perform calibration for new media rolls.

5.3 Tlač

Once the printer is connected to your computer and drivers are installed, you can print labels from compatible software applications. The printer supports Latin fonts.

1. Otvorte softvér alebo aplikáciu na návrh štítkov.
2. Create or open the label design.
3. Select the Intermec PC43TB01100201 as your printer.
4. Adjust print settings as needed (e.g., number of copies, print quality).
5. Spustite tlačovú úlohu.

The printer features a tear-off function for easy label separation after printing.

6. Údržba

6.1 Čistenie tlačiarne

Pravidelné čistenie pomáha udržiavať kvalitu tlače a predlžuje životnosť tlačiarne.

• Tlačová hlava: Clean the printhead with an alcohol swab or printhead cleaning wipe when print quality degrades or after every few media roll changes. Ensure the printer is off and cool.
• Valčeková doska: Clean the platen roller with an alcohol swab to remove adhesive residue or dust.
• Exteriér: Vonkajšok utrite mäkkou, damp plátno. Nepoužívajte abrazívne čistiace prostriedky.

6.2 Výmena média a pásky

Replace media rolls and thermal transfer ribbons as they run out. Follow the loading instructions in Section 4.4.

7. Riešenie problémov

This section addresses common issues you might encounter. For more complex problems, contact Intermec support.

• Tlačiareň nereaguje:
  • Skontrolujte napájacie pripojenia.
  • Verify USB or LAN cable connections.
  • Reštartujte tlačiareň a počítač.
  • Ensure printer drivers are correctly installed.
• Nízka kvalita tlače:
  • Clean the printhead (refer to Section 6.1).
  • Adjust print darkness settings via the LCD display or printer driver.
  • Ensure correct media type is selected.
  • Check if the ribbon (for thermal transfer) is correctly installed and not depleted.
• Štítky sa nepodávajú správne:
  • Reload media, ensuring it is properly aligned in the guides.
  • Calibrate the printer for the loaded media type.
  • Skontrolujte, či sa v dráhe média nenachádzajú nejaké prekážky.
• LCD Display Error Messages:
  • Consult the printer's on-screen help or the full user manual for specific error code meanings and resolutions.

8. Špecifikácie

9. Záruka a podpora

For detailed warranty information, please refer to the documentation provided with your purchase or contact your reseller. Intermec provides support for its products.

• Výrobca: Intermec
• Číslo modelu: PC43TB01100201
• For technical assistance, visit the official Intermec support webalebo kontaktujte ich zákaznícky servis.