Stihl MS 201 TC-M Chainsaw Instruction Manual

1. Bezpečnostné informácie

Operating a chainsaw can be dangerous if proper safety precautions are not followed. Always read and understand the entire instruction manual before operating the Stihl MS 201 TC-M chainsaw. Failure to follow safety instructions can result in serious injury or death.

Osobné ochranné prostriedky (OOP)

• Ochrana hlavy: Wear a safety helmet with face and hearing protection.
• Ochrana očí: Vždy noste ochranné okuliare alebo ochranné okuliare.
• Ochrana rúk: Používajte odolné pracovné rukavice.
• Ochrana nôh: Noste ochranné nohavice alebo návleky na motorovú pílu.
• Ochrana nôh: Wear safety boots with steel toes and non-slip soles.

Bezpečnosť pri manipulácii s palivom

• Always mix and handle fuel in a well-ventilated area, away from ignition sources.
• Používajte iba schválené nádoby na palivo.
• Pri tankovaní nefajčite.
• Rozliate palivo ihneď utrite.

2. Produkt skončilview

The Stihl MS 201 TC-M is a powerful and compact gasoline-powered chainsaw designed for professional tree care and pruning. It features a 35 cm cutting length and is equipped with advanced engine technology for efficient operation.

Obrázok 2.1: Vrchná strana view of the Stihl MS 201 TC-M chainsaw, highlighting the ergonomic handle and engine housing.

Obrázok 2.2: Strana view of the Stihl MS 201 TC-M chainsaw, showing the Stihl branding and engine components.

3. Nastavenie

Vybalenie a montáž

1. Opatrne vyberte všetky komponenty z obalu.
2. Inspect for any shipping damage. If damaged, do not use and contact your dealer.
3. Uistite sa, že sú prítomné všetky diely uvedené v dodacom liste.

Bar and Chain Installation

Proper installation of the guide bar and saw chain is crucial for safe and efficient operation.

1. Uistite sa, že je brzda reťaze uvoľnená.
2. Remove the chain sprocket cover by loosening the nuts.
3. Umiestnite vodiacu lištu na čapy.
4. Fit the saw chain around the sprocket and into the guide bar groove. Ensure the cutting edges face forward on the top of the bar.
5. Replace the chain sprocket cover and hand-tighten the nuts. Do not fully tighten yet.
6. Adjust chain tension (refer to 'Chain Tension Adjustment' in Section 5).
7. Fully tighten the chain sprocket cover nuts.

Obrázok 3.1: Detailný záber view of the chainsaw's chain and guide bar, illustrating proper assembly.

Fuel and Chain Oil Filling

The MS 201 TC-M operates on a gasoline-oil mixture and requires chain lubricant.

• Palivo: Use a high-quality unleaded gasoline mixed with Stihl 2-stroke engine oil at the recommended ratio (typically 50:1). Refer to the fuel tank cap for specific ratios.
• Olej na reťaz: Fill the chain oil tank with high-quality bar and chain lubricant. Do not use waste oil.

Po naplnení sa uistite, že oba uzávery sú bezpečne utiahnuté.

4. Návod na obsluhu

Štartovanie motorovej píly

1. Umiestnite motorovú pílu na pevný a rovný povrch.
2. Aktivujte brzdu reťaze zatlačením predného chrániča ruky dopredu.
3. Set the master control lever to the cold start position (choke).
4. Držte motorovú pílu pevne jednou rukou za prednú rukoväť a nohu položte na zadnú rukoväť.
5. Pull the starter cord slowly until resistance is felt, then pull briskly until the engine fires briefly.
6. Hlavnú ovládaciu páku presuňte do polohy polovičného plynu.
7. Znovu potiahnite štartovaciu šnúru, kým motor nenaštartuje.
8. Blip the throttle to disengage the half-throttle and return to idle.
9. Pred začatím rezania uvoľnite brzdu reťaze.

Stopping the Chainsaw

To stop the engine, move the master control lever to the STOP position.

Prevádzka reťazovej brzdy

The chain brake is a critical safety feature. It can be engaged manually by pushing the front hand guard forward or automatically by inertia during kickback. Always ensure the chain brake is functional before each use.

5. Údržba

Regular maintenance ensures the longevity and safe operation of your Stihl MS 201 TC-M chainsaw.

Nastavenie napnutia reťaze

Correct chain tension is vital. A loose chain can derail, and an overly tight chain can cause premature wear to the bar and chain, and reduce engine power.

1. Loosen the nuts on the chain sprocket cover.
2. Using the tensioning screw, adjust the chain until it fits snugly against the underside of the guide bar, but can still be pulled around by hand.
3. Lift the tip of the guide bar slightly while tightening the nuts on the chain sprocket cover.
4. Check tension again.

Ostrenie reťaze

A sharp chain is essential for efficient and safe cutting. Sharpen the chain regularly or have it professionally sharpened.

Čistenie vzduchového filtra

Clean the air filter regularly to maintain engine performance and prevent damage. Remove the filter cover and clean the filter element with warm soapy water or compressed air. Replace if damaged.

Kontrola zapaľovacej sviečky

Inspect the spark plug for wear and proper gap. Replace if electrodes are worn or fouled. Refer to the specifications for the correct spark plug type and gap.

Údržba vodiacej lišty

Regularly clean the guide bar groove and oil holes. Flip the guide bar periodically to ensure even wear.

6. Riešenie problémov

This section addresses common issues you might encounter with your Stihl MS 201 TC-M chainsaw.

7. Špecifikácie

Key technical specifications for the Stihl MS 201 TC-M chainsaw:

• Číslo modelu: MS 201
• Zdroj napájania: Benzín
• Dĺžka rezu: 35 cm
• Hmotnosť položky: 3.85 kg (8.49 libier)
• Rozmery produktu: 37 x 10 x 37 cm (14.57 x 3.94 x 14.57 palca)
• Materiál: Plast (kryt)
• Výrobca: STIHL
• GTIN (UPC): 00795711953546

8. Záruka a podpora

For warranty information, please refer to the warranty card included with your product or contact your authorized Stihl dealer. Keep your proof of purchase for warranty claims.

For technical support, spare parts, or service, please contact your local authorized Stihl service center. Only use genuine Stihl replacement parts and accessories.