Jeden za všetkých SV1770

One For All SV1770 Bluetooth Audio Transmitter User Manual

Model: SV1770 | Značka: One For All

Úvod

The One For All SV1770 Bluetooth Audio Transmitter provides a wireless solution for transmitting audio from your television or other audio sources to Bluetooth-enabled headphones. This device allows for private listening without disturbing others and supports simultaneous connection for up to two pairs of headphones. It incorporates aptX technology for enhanced sound quality and is conveniently powered via USB.

Obsah balenia

Prosím, overte si, či sú v balení všetky položky:

  • One For All SV1770 Bluetooth Audio Transmitter unit
  • 3.5 mm stereo audio kábel
  • RCA audio cable (red/white)
  • Napájací kábel USB
One For All SV1770 Bluetooth Audio Transmitter and included accessories

Image: The One For All SV1770 Bluetooth Audio Transmitter shown with its included accessories, which are a 3.5mm audio cable, an RCA audio cable, and a USB power cable.

Nastavenie

Connecting the Transmitter to Your TV/Audio Source

The SV1770 can be connected to your TV or audio source using either the 3.5mm audio output or the RCA audio outputs.

  1. Napájanie: Connect the USB power cable from the transmitter to a free USB port on your TV or a USB power adapter (not included). The transmitter requires 5V USB power.
  2. Zvukové pripojenie (3.5 mm): If your TV or audio source has a 3.5mm headphone jack, connect one end of the 3.5mm stereo audio cable to the transmitter's 3.5mm input and the other end to the TV's headphone jack.
  3. Audio Connection (RCA): If your TV or audio source has RCA audio output ports (typically red and white), connect the RCA audio cable to these ports and the other end to the transmitter's RCA input.
One For All SV1770 Bluetooth Audio Transmitter connected to a TV

Image: The SV1770 Bluetooth Audio Transmitter is shown connected to the rear of a television, utilizing both RCA audio cables for sound input and a USB port for power.

Párovanie s Bluetooth slúchadlami

Follow these steps to pair your Bluetooth headphones with the SV1770 transmitter:

  1. Ensure the SV1770 transmitter is powered on. The LED indicator will show its status.
  2. Put your Bluetooth headphones into pairing mode. Refer to your headphone's instruction manual for specific instructions.
  3. Press and hold the pairing button on the SV1770 transmitter for approximately 3 seconds until the LED indicator flashes rapidly, indicating it is in pairing mode.
  4. Place the headphones close to the transmitter. The devices should automatically connect. Once connected, the LED indicator on the transmitter will change to a steady blue light.
  5. To connect a second pair of headphones, repeat steps 2-4. The transmitter can support up to two pairs of headphones simultaneously.

Návod na obsluhu

Prenos zvuku

Once successfully paired, audio from your connected TV or audio source will be transmitted wirelessly to your Bluetooth headphones.

Ovládanie hlasitosti

Volume control is typically managed directly on your Bluetooth headphones. The transmitter does not have independent volume controls.

Opätovné pripojenie

After initial pairing, the transmitter and headphones should automatically reconnect when both devices are powered on and within range. If they do not reconnect, briefly press the pairing button on the transmitter to initiate reconnection.

Údržba

  • Keep the transmitter clean by wiping it with a soft, dry cloth.
  • Avoid exposing the device to excessive moisture, dust, or extreme temperatures.
  • Nepokúšajte sa zariadenie otvárať ani opravovať sami, pretože tým stratíte platnosť záruky.

Riešenie problémov

ProblémRiešenie
Zo slúchadiel nepočujete žiadny zvuk.
  • Ensure the transmitter is powered on and the LED indicator is solid blue.
  • Verify that the headphones are paired and connected to the transmitter.
  • Check the audio cable connection between the transmitter and the TV/audio source.
  • Confirm the TV's audio output is active and not muted.
  • Increase the volume on your headphones.
Nedajú sa spárovať slúchadlá.
  • Ensure both the transmitter and headphones are in pairing mode (flashing LED).
  • Move headphones closer to the transmitter.
  • Vypnite ostatné zariadenia Bluetooth v okolí, aby ste predišli rušeniu.
  • Try resetting both the transmitter and headphones (refer to their respective manuals).
Poor audio quality or dropouts.
  • Ensure the transmitter and headphones are within the 10-meter range.
  • Minimize obstacles (walls, large objects) between the devices.
  • Check for sources of interference (Wi-Fi routers, microwaves).
  • Verify the audio source quality.

Špecifikácie

  • Model: SV1770
  • Verzia Bluetooth: 3.0
  • Bluetooth kodeky: aptX, SBC
  • Bezdrôtový dosah: Až 10 33 metrov (XNUMX XNUMX stôp)
  • Typ zvukového výstupu: Bluetooth
  • Režim výstupu zvuku: Stereo
  • Audio vlastnosti: Wolfson D/A converter, up to 24 bit 192 kHz
  • Hardvérové ​​rozhranie: Bluetooth 3.0, USB 3.0 (for power)
  • Kompatibilné zariadenia: TV, stereo, any audio device with 3.5mm or RCA audio output
  • Zdroj napájania: USB (5V)
  • Rozmery produktu: 17 x 4 x 1.6 cm
  • Hmotnosť: 31 g
  • Materiál: Polykarbonát

Záruka a podpora

Informácie o záruke a technickej podpore nájdete na oficiálnych webových stránkach One For All. webalebo sa priamo obráťte na ich zákaznícky servis. Uschovajte si doklad o kúpe pre prípad reklamácie.

Online podpora: Navštívte www.oneforall.com for FAQs, product registration, and contact details.

Zákaznícky servis: Pozrite si kontaktné informácie uvedené na obale produktu alebo na oficiálnom webstránka pre regionálnu podporu.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.