Lepro Industrial LED Desk Lamp

Úvod

This manual provides essential instructions for the safe and efficient use of your Lepro Industrial LED Desk Lamp. Tento všestranný lamp features an adjustable arm and a sturdy clamp, making it suitable for various environments such as study desks, office workstations, or bedside tables. It is designed to accommodate an E27 bulb (not included), allowing you to choose the light source that best fits your needs.

Pred inštaláciou a prevádzkou si pozorne prečítajte tento návod a uschovajte si ho pre budúce použitie.

Image: The Lepro Industrial LED Desk Lamp providing illumination on a modern desk setup.

Bezpečnostné pokyny

• Read all instructions carefully before using the lamp.
• Ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
• Používajte iba žiarovky s päticou E27 s maximálnym príkonomtage 40W.
• Nepoužívajte lamp s poškodeným napájacím káblom alebo zástrčkou.
• This product is intended for indoor use only. Do not expose to water or high humidity.
• Udržujte lamp ďaleko od horľavých materiálov.
• Nepokúšajte sa rozoberať alebo opravovať lamp sami. V prípade záujmu o servis kontaktujte kvalifikovaný personál.

Obsah balenia

Skontrolujte, prosím, balenie, či neobsahuje nasledujúce položky:

• Lepro Industrial LED Desk Lamp (main unit with clamp)
• Používateľská príručka

Note: The E27 bulb is not included and must be purchased separately.

Nastavenie a inštalácia

Follow these steps to assemble and install your desk lamp:

1. Pripojte Clamp: Bezpečne upevnite klamp to a desk or shelf edge. The clamp can accommodate surfaces up to 5.4 cm thick. Tighten the screw until the clamp is firmly in place, ensuring stability for both vertical and horizontal mounting.
2. Zostavte Lamp hlava: Nainštalujte lamp cover onto the upper part of the main unit. Twist the cover in the direction indicated (usually clockwise) to tighten it securely.
3. Vložte rameno: Opatrne vložte lamp arm into the designated joint on the clamp base. Ensure it clicks or locks into place for stable positioning.
4. Nainštalujte žiarovku: Uistite sa, že lamp is unplugged from the power outlet. Screw an E27 base bulb (not included) into the lamp objímku. Nepreťahujte.
5. Pripojiť k napájaniu: Zapojte lampZapojte napájací kábel do vhodnej elektrickej zásuvky.

Image: The bidirectional clamp allows for both vertical and horizontal mounting on surfaces up to 5.4 cm thick.

Obrázok: The lamp requires an E27 bulb, which is not included. Various E27 bulb types can be used.

Návod na obsluhu

Zapnutie/vypnutie: Locate the rocker switch on the power cord. Press the switch to turn the lamp zapnuté alebo vypnuté.

Nastavenie uhla svetla: Lamp features a highly flexible and adjustable arm with multiple joints. You can rotate the lamp head up to 300 degrees and adjust the arm at various angles (e.g., 120 degrees at the main joints, 360 degrees at the base clamp) to direct light precisely where needed. The spring-balanced arm ensures the lamp stays in your desired position.

Obrázok: The lamp's flexible arm and head allow for multi-angle adjustment to optimize lighting.

Údržba

Čistenie: Na čistenie lamp, ensure it is unplugged and cool. Wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.

Výmena žiarovky: Before replacing the bulb, ensure the lamp is unplugged and the old bulb has cooled down completely. Carefully unscrew the old E27 bulb and screw in a new E27 bulb (maximum 40W). Ensure the new bulb is securely seated before plugging the lamp späť dovnútra.

Riešenie problémov

• Lamp nezapne sa:
  • Skontrolujte, či je napájací kábel bezpečne zapojený do zásuvky.
  • Ensure the rocker switch on the cord is in the 'ON' position.
  • Verify that the E27 bulb is correctly installed and not faulty. Try testing with a known working bulb.
  • Skontrolujte elektrickú zásuvku zapojením iného zariadenia.
• Svetlo bliká:
  • Uistite sa, že žiarovka je pevne zaskrutkovaná.
  • The bulb may be faulty or incompatible. Replace it with a new E27 bulb.
  • Check for loose connections in the power cord or outlet.
• Lamp je nestabilný:
  • Zabezpečte klamp is tightened securely to the desk or surface.
  • Verify that the surface thickness is within the maximum 5.4 cm limit for the clamp.
  • Skontrolujte, či je lamp arm is properly inserted into the clamp kĺb.

Špecifikácie

Image: Product dimensions and key features like E27 bulb base and power cord length.

Záruka a podpora

Záruka: This Lepro Industrial LED Desk Lamp comes with a 1-year warranty for replacement parts in the EU, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Zákaznícka podpora: For technical assistance, troubleshooting, or warranty claims, please contact Lepro customer support through the retailer where the product was purchased or visit the official Lepro website for contact information. Please have your model number (3100027-DW-EU) and proof of purchase ready when contacting support.