1. Produkt skončilview
The Astralpool Aster 99- Sand Filter is a high-performance filtration system designed for swimming pools. Constructed from laminated polyester and fiberglass, this filter ensures durability and efficient water purification. It features a lateral selector valve, a manometer for pressure monitoring, and a drain valve for easy water emptying. This manual provides essential information for the safe and effective installation, operation, and maintenance of your filter.
- Konštrukcia: Laminated polyester and fiberglass for enhanced durability.
- Komponenty: Equipped with a manometer, drain valve, and lateral selector valve.
- Maximálny pracovný tlak: 2.5 kg/cm².
- Maximum Filtration Capacity: 50 m³/h/m².
2. Nastavenie a inštalácia
Proper installation is crucial for the optimal performance and longevity of your Astralpool Aster 99- Sand Filter. Ensure all connections are secure and watertight.
2.1. Výber lokality
Choose a level, solid surface for the filter, preferably close to the pool pump and the pool itself. The location should be protected from direct sunlight and adverse weather conditions, and allow sufficient space for maintenance and operation.
2.2. Zostava filtra
- Umiestnenie filtra: Place the filter tank on its designated base.
- Pridajte filtračné médium: Carefully fill the filter tank with the appropriate amount and type of filter sand (or other media) as recommended by Astralpool. Ensure the central pipe is protected during this process to prevent sand from entering it.
- Install Multi-Port Valve: Attach the lateral selector valve to the top of the filter tank. Ensure the O-ring is correctly seated and the clamp je bezpečne pripevnený.
- Pripojiť inštalatérske práce: Connect the pump outlet to the "PUMP" port on the valve, the pool return line to the "RETURN" port, and the waste line to the "WASTE" port. Use appropriate fittings and sealants to prevent leaks.
- Inštalácia manometra: Screw the manometer into its designated port on the multi-port valve.
- Vypúšťací ventil: Ensure the drain valve at the bottom of the filter is closed.
Obrázok 1: Technical drawing of the Astralpool Aster 99- Sand Filter, illustrating key dimensions (D, H, M, N, K) and overall structure. This diagram helps in understanding the physical layout and connection points of the filter.
3. Návod na obsluhu
The multi-port valve controls the filter's operation. Always turn off the pump before changing the valve position to prevent damage.
3.1. Valve Positions
- FILTER: Normal filtration mode. Water flows through the filter media and returns to the pool.
- BACKWASH: Cleans the filter media by reversing water flow. Water is discharged through the waste line.
- PLÁKANIE: Used after backwashing to settle the filter media and flush out any remaining debris from the waste line.
- ODPAD/ODVOD: Bypasses the filter, sending water directly to the waste line. Useful for vacuuming heavy debris or lowering pool water level.
- RECIRCULOVAŤ: Obchádza filter a cirkuluje vodu priamo späť do bazéna. Užitočné na distribúciu chemikálií bez filtrácie.
- ZATVORENÉ: Shuts off all flow to the filter and pool. Use for pump maintenance or when the filter is not in use.
3.2. Počiatočné spustenie
- Ensure the filter is filled with sand and all connections are secure.
- Set the multi-port valve to the "BACKWASH" position.
- Zapnite čerpadlo a preplachujte ho 2-3 minúty alebo kým voda v kontrolnom okienku (ak je k dispozícii) nebude vytekať číra.
- Vypnite čerpadlo.
- Set the valve to the "RINSE" position.
- Zapnite čerpadlo a preplachujte 30 – 60 sekúnd.
- Vypnite čerpadlo.
- Set the valve to the "FILTER" position.
- Turn on the pump. The filter is now operating in normal filtration mode.
4. Údržba
Regular maintenance ensures efficient filtration and extends the life of your Astralpool Aster 99- Sand Filter.
4.1. Backwashing
Backwash the filter when the pressure gauge reading is 0.2-0.3 kg/cm² (3-5 psi) above the clean filter's starting pressure, or when pool water clarity decreases.
- Vypnite čerpadlo.
- Nastavte viaccestný ventil na „SPÄTNÝ PREPLACH“.
- Turn on the pump and backwash until the water in the sight glass runs clear (typically 2-3 minutes).
- Vypnite čerpadlo.
- Set the valve to "RINSE".
- Zapnite čerpadlo a preplachujte 30 – 60 sekúnd.
- Vypnite čerpadlo.
- Set the valve to "FILTER".
- Zapnite čerpadlo, aby ste obnovili normálnu filtráciu.
4.2. Príprava na zimu (ak je to relevantné)
In colder climates, proper winterization is essential to prevent freeze damage.
- Drain all water from the filter tank by opening the drain valve.
- Remove the manometer and store it in a warm, dry place.
- Set the multi-port valve handle between two positions (e.g., between "FILTER" and "CLOSED") to relieve pressure on the internal seal.
- Disconnect all plumbing and store pipes if necessary.
5. Riešenie problémov
This section addresses common issues you might encounter with your sand filter.
| Problém | Možná príčina | Riešenie |
|---|---|---|
| Low water flow / High pressure gauge reading | Clogged filter media; dirty pump strainer basket; closed valve. | Backwash the filter; clean pump strainer basket; ensure all valves are open. |
| Zakalená voda v bazéne | Insufficient filtration time; dirty filter media; improper chemical balance; damaged internal components. | Increase filtration time; backwash/rinse filter; check pool chemistry; inspect filter internals for damage. |
| Voda unikajúca z ventilu | Worn O-rings or gaskets; loose clamp. | Skontrolujte a vymeňte O-krúžky/tesnenia; utiahnite spojovacie maticeamp. |
| Piesok sa vracia do bazéna | Damaged laterals inside filter; improper rinsing after backwash. | Perform a thorough rinse cycle; inspect and replace damaged laterals. |
6. Technické špecifikácie
Detailed specifications for the Astralpool Aster 99- Sand Filter (Ø 500 model).
- Model: Aster 99- Ø 500
- Stavebný materiál: Laminated Polyester and Fiberglass
- Typ ventilu: Lateral Selector Valve
- Zahrnuté príslušenstvo: Manometer, Drain Valve
- Maximálny pracovný tlak: 2.5 kg/cm²
- Maximum Filtration Capacity: 50 m³/h/m²
6.1. Dimensions (for Ø 500 model)
| Rozmer | Hodnota (mm) |
|---|---|
| Ø (Diameter) | 500 |
| D (Overall Diameter) | 500 |
| H (výška) | 855 |
| M (Valve Height from Base) | 415 |
| N (Lower Port Height from Base) | 290 |
| K (Port Size) | 1 1/2" |
Note: Dimensions are approximate and subject to manufacturing tolerances. Refer to Figure 1 for visual representation of dimensions.
7. Informácie o záruke
Specific warranty details for Astralpool products are typically provided at the point of purchase or within separate warranty documentation. Please retain your proof of purchase for any warranty claims. For detailed warranty terms and conditions, refer to the official Astralpool webstránku alebo kontaktujte svojho autorizovaného predajcu.
8. Zákaznícka podpora
For technical assistance, spare parts, or further inquiries regarding your Astralpool Aster 99- Sand Filter, please contact your local Astralpool dealer or visit the official Astralpool webstránky.
Astralpool Official Webmiesto: www.astralpool.com