1. Úvod
This instruction manual provides essential information for the safe and effective use of your new SHARP ES-S7C-WL Compact Drum Washing Machine. Please read this manual thoroughly before operating the appliance and retain it for future reference. This model features a compact design, heater sensor drying, four eco-sensors for optimized performance, quiet DD inverter operation, and Plasmacluster technology for enhanced hygiene.
Obrázok 1: Predná strana view of the SHARP ES-S7C-WL Compact Drum Washing Machine.
2. Bezpečnostné informácie
Pri používaní elektrických spotrebičov vždy dodržiavajte základné bezpečnostné opatrenia, aby ste znížili riziko požiaru, úrazu elektrickým prúdom alebo zranenia osôb.
- Uistite sa, že je spotrebič správne uzemnený.
- Nepoužívajte práčku, ak je poškodená alebo nefunguje správne.
- Keep children away from the appliance during operation. This model includes a child lock feature.
- Neprajte ani nesušte predmety znečistené horľavými látkami.
- Pred čistením alebo akoukoľvek údržbou odpojte spotrebič od elektrickej zásuvky.
3. Nastavenie a inštalácia
Proper installation is crucial for the performance and longevity of your washing machine. Refer to the following guidelines and diagrams.
3.1 Carry-in Confirmation Items
Before carrying the unit into your home, confirm that all entry points and passages are wide enough. A minimum clearance of 10cm more than the product's dimensions is required for smooth transport.
Figure 2: Carry-in clearance requirements for product dimensions, entrance, corridor, elevator, and staircase.
3.2 Installation Confirmation Items
Uistite sa, že miesto inštalácie spĺňa nasledujúce kritériá:
- Priestorové požiadavky: Allow at least 15cm above the unit, 1cm behind, and 1cm on each side for proper ventilation and operation.
- Výška batérie: The faucet should be 10-20cm higher than the top of the washing machine.
- Priestor pre otváranie dverí: Ensure 20-40cm of clear space in front of the machine for the door to open fully.
- Waterproof Pan: Check for the presence of a waterproof pan and its inner dimensions. The installable waterproof pan requires an inner width of 590mm or more and an inner depth of 540mm or more.
- Additional costs may apply depending on the presence of a drain elbow, foot stand, and the drain port location.
Figure 3: Installation space requirements including clearances and waterproof pan dimensions.
3.3 Kompaktný dizajn
The ES-S7C-WL is designed to fit into standard spaces. Its body measures 59.6cm in width and 60.0cm in depth (excluding hoses), allowing it to be placed neatly within a typical waterproof pan (approx. 64cm x 64cm outer dimensions). The door height is 47.2cm, making it easy to load and unload laundry. Ample space is provided even when the door is fully open.
Figure 4: Compact drum dimensions and door height for easy access.
4. Návod na obsluhu
This section details the basic operation of your washing machine.
4.1 Ovládací panel Overview
Familiarize yourself with the control panel for selecting wash cycles and options.
Figure 5: Control panel layout and detailed product dimensions.
4.2 Smart Energy Saving with 4 Sensors
The washing machine is equipped with four eco-sensors to optimize washing and drying performance while saving energy.
- Snímač teploty: Detects ambient temperature and drying conditions.
- Senzor hladiny vody: Adjusts water usage based on the type of clothes.
- Weight Sensor: Determines the amount of clothes to optimize wash cycles.
- Senzor vibrácií: Detects clothes imbalance during spin cycles.
Figure 6: The four eco-sensors for smart energy saving.
4.3 Technológia Plasmacluster
The integrated Plasmacluster technology helps maintain cleanliness and freshness.
- Tub Clean Course: A one-button operation to clean the washing tub using Plasmacluster ions.
- Deodorizing Course: For clothes that cannot be washed with water, this course uses Plasmacluster ions to remove odors.
Figure 7: Plasmacluster features for tub cleaning and deodorizing.
5. Údržba
Pravidelná údržba zaisťuje optimálny výkon a predlžuje životnosť vašej práčky.
- Čistenie vane: Utilize the Plasmacluster Tub Clean Course regularly to prevent mold and odors in the washing tub.
- Čistenie filtra: Clean the lint filter after every use to maintain drying efficiency.
- Čistenie exteriéru: Vonkajšok utrite mäkkou, damp plátno. Nepoužívajte abrazívne čistiace prostriedky.
- Tesnenie dverí: Periodically wipe the door gasket to remove any residue or moisture.
6. Riešenie problémov
Ak sa vyskytnú problémy s práčkou, pozrite si nasledujúce bežné kroky na riešenie problémov. V prípade zložitejších problémov kontaktujte zákaznícku podporu.
| Problém | Možná príčina | Riešenie |
|---|---|---|
| Stroj sa nespustí | Power cord unplugged, door not closed properly, child lock engaged. | Check power connection, ensure door is latched, deactivate child lock. |
| Nadmerné vibrácie/hluk | Uneven load, machine not level, shipping bolts not removed. | Redistribute laundry, adjust leveling feet, ensure shipping bolts are removed. |
| Voda nevyteká | Zalomená alebo upchatá odtoková hadica, upchatý odtokový filter. | Skontrolujte a vyčistite odtokovú hadicu, vyčistite odtokový filter. |
| Oblečenie neschne správne | Lint filter clogged, overloaded, incorrect drying cycle selected. | Clean lint filter, reduce load size, select appropriate drying cycle. |
7. Špecifikácie
Detailed technical specifications for the SHARP ES-S7C-WL.
| Funkcia | Špecifikácia |
|---|---|
| Číslo modelu | ES-S7C-WL |
| Kapacita (pranie/odstreďovanie) | 7 kg |
| Kapacita (suchá) | 3.5 kg |
| Celkové rozmery (Š x H x V) | 640 mm x 600 mm x 1039 mm (including drain hose) |
| Hmotnosť produktu | 76 kg |
| Spotreba energie (pranie) | 60 Wh (50/60Hz) |
| Power Consumption (Wash to Dry) | 1600 Wh (50/60Hz) |
| Approximate Time (Wash) | 44 minutes (50/60Hz) |
| Approximate Time (Wash to Dry) | 170 minutes (50/60Hz) |
| Prevádzkový hluk (pranie) | 24 dB |
| Prevádzkový hluk (rotácia) | 39 dB |
| Operating Noise (Dry) | 36 dB |
| Water Usage (Wash to Spin 7kg) | 57 l |
| Water Usage (Wash to Dry 3.5kg) | 80 l |
| Voltage | 100 V (AC) |
| Otváracia pozícia | Predné |
| Materiál bubna | Nerezová oceľ |
| Vlastnosti | Inverter, Child Lock, Heater |
8. Záruka a podpora
Informácie o záruke nájdete v záručnej karte, ktorá je súčasťou balenia vášho produktu, alebo navštívte oficiálne webové stránky spoločnosti SHARP. website. If you require technical assistance or have questions not covered in this manual, please contact SHARP customer support.
SHARP Customer Support: Please refer to your regional SHARP webstránky pre kontaktné údaje.