Einhell TC-TC 800 Tile Cutter Instruction Manual

1. Produkt skončilview

The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.

Kľúčové vlastnosti:

• Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
• Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
• Integrated Water Reservoir: Provides necessary water cooling for the saw blade, protecting it from heat damage.
• Kapacita rezu: Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
• Bezpečnostná stráž: A protective guard for the cutting disc ensures user safety from chips and dust.

2. Bezpečnostné pokyny

Vždy si prečítajte a pochopte všetky bezpečnostné upozornenia, pokyny, ilustrácie a špecifikácie dodané s týmto elektrickým náradím. Nedodržanie všetkých nižšie uvedených pokynov môže mať za následok úraz elektrickým prúdom, požiar a/alebo vážne zranenie.

Všeobecné bezpečnostné upozornenia:

• Noste vhodné osobné ochranné prostriedky (OOP) vrátane ochranných okuliarov, chráničov sluchu a rukavíc.
• Uistite sa, že pracovný priestor je čistý, dobre osvetlený a bez prekážok.
• Pri práci s náradím držte deti a okolostojace mimo dosahu.
• Never operate the tool if the power cord or plug is damaged.
• Pred akýmkoľvek nastavovaním, výmenou príslušenstva alebo údržbou vždy odpojte napájanie.
• Používajte správny kotúč pre rezaný materiál.
• Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.

3. Komponenty Overview

Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:

• Cutting Table (Stainless Steel)
• Diamond Cutting Disc (180 mm diameter)
• Motorová jednotka
• Vodná nádrž
• Cutting Guide with Scale
• Angle Stop (-45° to +45°)
• Chránič čepele
• Prepínač zapnutia/vypnutia
• Rukoväť na prenášanie

Obrázok 1: Koniecview of the Einhell TC-TC 800 Tile Cutter with its main parts.

4. Nastavenie

Before operating the tile cutter, ensure proper setup for safety and optimal performance.

4.1 Vybalenie a kontrola

1. Opatrne vyberte všetky komponenty z obalu.
2. Inspect the tool for any signs of damage during transit. Do not operate if damaged.
3. Uistite sa, že sú prítomné všetky uvedené komponenty.

4.2 Naplnenie nádrže na vodu

The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.

1. Locate the water reservoir beneath the cutting table.
2. Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
3. Počas prevádzky pravidelne kontrolujte hladinu vody a podľa potreby ju doplňujte.

Figure 2: Filling the water reservoir for wet cutting.

4.3 Adjusting the Cutting Guide and Angle Stop

For accurate cuts, adjust the cutting guide and angle stop as required.

1. The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
2. For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.

Figure 3: Adjustable angle stop for miter cuts.

5. Návod na obsluhu

Follow these steps for safe and effective tile cutting.

5.1 Zapnutie/vypnutie

1. Connect the tile cutter to a suitable power outlet (240 Volts).
2. To turn on, press the green 'ON' button.
3. To turn off, press the red 'OFF' button.

Figure 4: Power switch for turning the machine on and off.

5.2 Vytvorenie rezu

1. Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
2. Ensure the water pump is active and water is flowing to the blade.
3. Turn on the tile cutter.
4. Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
5. Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.

Figure 5: Demonstrating a tile being cut with the machine.

5.3 Official Product Video: How to Use

6. Údržba

Regular maintenance ensures the longevity and performance of your tile cutter.

6.1 Čistenie nádrže na vodu

After each use, clean the water reservoir to prevent buildup of tile dust and debris.

1. Odpojte napájanie.
2. Remove the cutting table or access panel to reach the reservoir.
3. Empty the dirty water and thoroughly clean the reservoir with fresh water.
4. Znova zložte komponenty.

6.2 Výmena čepele

Replace the diamond cutting disc when it becomes dull or damaged.

1. Uistite sa, že je nástroj odpojený od siete.
2. Na uvoľnenie upevňovacej matice čepele použite dodaný nástroj.
3. Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
4. Bezpečne utiahnite upevňovaciu maticu.

7. Riešenie problémov

This section addresses common issues you might encounter with your tile cutter.

8. Špecifikácie

9. Záruka a podpora

9.1 Informácie o záruke

This Einhell product comes with a 2-ročná obmedzená zárukaUschovajte si doklad o kúpe pre prípadné reklamácie.

9.2 Zákaznícka podpora

For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell webNajaktuálnejšie kontaktné informácie nájdete na webovej stránke alebo na obale produktu.