AVANTEK Wireless Doorbell CW-12 User Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your AVANTEK Wireless Doorbell CW-12. Please read this manual thoroughly before using the product to ensure proper function and longevity. This wireless doorbell system offers convenience and reliability for your home or office.

2. Obsah balenia

Po vybalení sa, prosím, uistite, že balenie obsahuje všetky nižšie uvedené položky:

• 1 × Transmitter (Doorbell Push Button)
• 2 × Plug-in Receivers (Chime Units)
• 1 × Adhesive Tape for Transmitter Mounting
• 2 × Screws for Transmitter Mounting
• 2 × Anchors for Transmitter Mounting
• 1 × skrutkovač
• 1 × Návod na použitie

3. Vlastnosti produktu

• 1000 ft (300 m) Ultra-Long Wireless Range: Zaisťuje, že nikdy nezmeškáte návštevu, aj keď ste o niekoľko izieb ďalej alebo na inom poschodí.
• 52 Chimes and Melodies: Choose from a wide selection of sounds with a 1.1 inch (29 mm) stereo speaker for rich, crisp audio.
• 5 nastaviteľných úrovní hlasitosti: Customize the sound level up to a maximum of 115 dB.
• LED indikátor blesku: Provides a visual alert, useful for noisy environments or for individuals with hearing impairments.
• IP55 Dustproof and Waterproof Transmitter: Designed to withstand various harsh weather conditions, operating effectively from -4 °F to 140 °F (-20 °C to 60 °C).
• Funkcia pamäte: Pamätá si vašu poslednú melódiu a úroveň hlasitosti po výpadku napájaniatage, čím sa eliminuje potreba resetovania nastavení.
• Kompaktný dizajn prijímača: The mini plug-in receivers are designed not to block adjacent power sockets.
• Rozšíriteľný systém: Easily add more AVANTEK CR-1/RB-1 plug-in receivers for increased coverage.

4. Nastavenie a inštalácia

4.1. Nastavenie prijímača

1. Plug the receiver into a standard electrical outlet. The LED on the receiver will flash, indicating it is powered on.

4.2. Transmitter Setup and Installation

The transmitter (push button) can be installed using either the adhesive tape or screws and anchors.

Metóda A: Použitie lepiacej pásky

1. Clean the desired installation area thoroughly to ensure it is free of dust and moisture.
2. Remove the protective film from one side of the adhesive tape and attach it to the back of the transmitter.
3. Remove the protective film from the other side of the adhesive tape.
4. Firmly press the transmitter onto the cleaned surface for at least 30 seconds.

Metóda B: Použitie skrutiek a kotiev

1. Open the transmitter cover by inserting the provided key into the grooved slot and gently prying it open.
2. Mark the positions for drilling holes on the wall using the back plate of the transmitter as a template.
3. Drill two holes at the marked positions. Insert the anchors into the holes.
4. Secure the back plate of the transmitter to the wall using the provided screws.
5. Snap the transmitter cover back onto the secured back plate.

5. Návod na obsluhu

5.1. Zmena melódií

To select a melody, press the 'Next' or 'Previous' button on the side of the receiver. There are 52 melodies available. Once you find your desired melody, it will be saved automatically.

5.2. Nastavenie hlasitosti

Press the 'Volume' button on the side of the receiver to cycle through 5 adjustable volume levels. Select the volume level that best suits your needs.

5.3. Tichý režim

To activate silent mode, repeatedly press the 'Volume' button until the volume indicator shows the lowest setting or is muted. In silent mode, the LED indicator will still flash when the doorbell is pressed, providing a visual alert without sound.

5.4. Spárovanie vysielača a prijímača

Your doorbell system comes pre-paired. If you need to re-pair or add additional transmitters/receivers:

1. Zapojte prijímač do elektrickej zásuvky.
2. Press and hold the 'Volume' button on the receiver for 3 seconds until the LED flashes rapidly. This indicates pairing mode.
3. Immediately press the push button on the transmitter. The receiver will chime once, and its LED will flash simultaneously with the transmitter's LED, indicating successful pairing.
4. Repeat the process for any additional transmitters or receivers.

6. Údržba

6.1. Výmena batérie (vysielač)

The transmitter uses a CR2032 lithium battery, which typically lasts up to 3 years. To replace the battery:

1. Insert the provided key or a small flat-head screwdriver into the grooved slot on the side of the transmitter.
2. Gently pry open the rear cover of the transmitter.
3. Opatrne vyberte starú batériu CR2032.
4. Vložte novú batériu CR2032 a uistite sa, že kladný pól (+) smeruje nahor.
5. Snap the rear cover back into place until it clicks securely.

7. Riešenie problémov

• Žiadny zvuk z prijímača: Ensure the receiver is properly plugged into a working power outlet. Check the volume level and ensure it is not set to silent mode. Re-pair the transmitter and receiver if necessary.
• Vysielač nefunguje: Verify the battery in the transmitter is correctly installed and has sufficient charge. Replace the CR2032 battery if needed. Ensure the transmitter is within the 1000 ft wireless range of the receiver.
• rušenie: Avoid installing the transmitter close to or on metal surfaces (e.g., metal door frames, metal mailboxes) as this can interfere with the wireless signal. Large metal objects or thick walls can reduce the effective range.
• Krátky dosah: Obstacles such as thick walls, metal structures, or other wireless devices can reduce the operating range. Try relocating the receiver or transmitter to a different position.

8. Špecifikácie

9. Záruka a podpora

AVANTEK is committed to providing high-quality products and customer satisfaction. Our wireless doorbell is approved by FCC, CE, and RoHS standards. We offer dedicated customer service and will always do our best to support you with any inquiries or issues.

For further assistance or warranty claims, please refer to the contact information provided on the AVANTEK official webstránku alebo vašu nákupnú dokumentáciu.