Armacost Lighting 511121 Remote Touch Dimmer and On/Off Switch User Manual

1. Produkt skončilview

This manual provides instructions for the installation and operation of the Armacost Lighting 511121 Remote Touch Dimmer and On/Off Switch. This device is designed for smooth, full-range dimming of white LED lighting using capacitive sensing technology. It features a small control unit and a 1-inch peel-and-stick stainless steel remote sensor disk, allowing for flexible placement and innovative control solutions for various lighting applications.

Image 1.1: Armacost Lighting 511121 Remote Touch Dimmer and On/Off Switch.

2. Bezpečnostné informácie

• Pred inštaláciou alebo servisom stmievača vždy odpojte napájanie.
• This product is intended for use with 12V or 24V DC LED lighting systems only.
• Neprekračujte maximálny watttage menovitý výkon 96 wattov.
• Uistite sa, že všetky pripojenia sú bezpečné a riadne izolované, aby ste predišli skratom.
• For best results, the Remote Touch LED Dimmer should be electrically isolated from other devices to prevent interference.
• Ak si nie ste istí niektorou časťou inštalačného procesu, poraďte sa s kvalifikovaným elektrikárom.

3. Obsah balenia

Pred začatím inštalácie skontrolujte, či sú všetky komponenty prítomné:

• One (1) Armacost Lighting 511121 Remote Touch Dimmer Module
• One (1) 1-inch Peel-and-Stick Stainless Steel Remote Sensor Disk

Image 3.1: The dimmer module and the remote touch sensor disk.

4. Špecifikácie

5. Nastavenie a inštalácia

Follow these steps for proper installation of your Remote Touch Dimmer:

1. Odpojenie napájania: Ensure all power to the lighting circuit is turned off at the breaker before beginning installation.
2. Pripojte k napájaciemu zdroju: Connect the dimmer module to a compatible 12V or 24V DC LED power supply (sold separately). Refer to the power supply's instructions for proper wiring.
3. Connect to LED Lighting: Connect the dimmer module's output to your Armacost Lighting RibbonFlex Pro White Tape Light or other compatible white LED lighting. This dimmer is specifically designed for white LED tape light.
4. Montáž riadiacej jednotky: Mount the main control unit in a secure, accessible location, ensuring proper ventilation.
5. Mount Sensor Disk: The 1-inch peel-and-stick stainless steel remote sensor disk can be surface-mounted or countersunk for a flush installation. Place it in a convenient location where touch control is desired. The sensor disk connects to the control unit via a 48-inch thin wire lead.
6. Elektrická izolácia: For optimal performance and to prevent interference, ensure the Remote Touch LED Dimmer is electrically isolated from other devices.
7. Obnoviť napájanie: Once all connections are secure and installation is complete, restore power to the circuit.

Image 5.1: Dimmer module showing input and output wiring terminals.

Obrázok 5.2: Detailný view of the touch sensor dimmer module and its remote disk.

6. Návod na obsluhu

The Armacost Lighting 511121 Remote Touch Dimmer provides intuitive control over your LED lighting:

• Zapnúť/vypnúť: Jednoducho poklepať the stainless steel sensor disk to turn the connected LED lights on or off.
• stmievanie: Ak chcete upraviť jas, dotknite sa a podržte the sensor disk. The lights will smoothly dim up or down. Release your finger when the desired brightness level is reached.
• Pamäť jasu: The dimmer features a memory function that saves the last brightness setting. When the lights are turned back on, they will return to the previously set level.

Obrázok 6.1: Príkladample of under cabinet LED lighting, which can be controlled by the touch dimmer.

7. Údržba

The Armacost Lighting 511121 Remote Touch Dimmer requires minimal maintenance:

• Čistenie: Wipe the sensor disk and dimmer module with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish or internal components.
• Kontrola: Pravidelne kontrolujte všetky káblové pripojenia, aby ste sa uistili, že sú bezpečné.
• Prostredie: Ensure the dimmer module is not exposed to excessive moisture or extreme temperatures outside its operating range (32°F to 80°C).

8. Riešenie problémov

If you encounter issues with your Remote Touch Dimmer, refer to the following common solutions:

• Svetlá sa nerozsvietia:
  • Verify that the power supply is connected and receiving power.
  • Check all wiring connections between the power supply, dimmer module, and LED lighting.
  • Ensure the LED lighting is compatible with a 12V or 24V DC system and is not exceeding the dimmer's 96-watt capacity.
• Dimming Not Functioning Correctly:
  • Ensure the sensor disk is clean and free of obstructions.
  • Confirm the sensor disk's wire lead is securely connected to the dimmer module.
  • Check for any electrical interference from nearby devices; ensure the dimmer is electrically isolated.
• Prerušovaná prevádzka:
  • This dimmer is designed to work specifically with Armacost Lighting RibbonFlex Pro White Tape Light. Incompatibility with other LED products may cause issues.
  • Re-check electrical isolation as interference can cause erratic behavior.

9. Záruka a podpora

The Armacost Lighting 511121 Remote Touch Dimmer and On/Off Switch comes with a Obmedzená jednoročná záruka. Táto záruka sa vzťahuje na chyby materiálu a spracovania pri bežnom používaní.

For technical support, warranty claims, or additional product information, please contact Armacost Lighting directly. Refer to the official Armacost Lighting webAktuálne kontaktné údaje nájdete na stránke alebo na obale produktu.