Sharp Atomic Clock Instruction Manual

Úvod

The Sharp Atomic Clock provides precise timekeeping and temperature monitoring for your home or office. Featuring a large, easy-to-read display, this clock automatically synchronizes with the atomic time signal (WWVB) broadcast from Fort Collins, Colorado, ensuring accuracy without manual adjustments. It also includes a wireless outdoor sensor to display both indoor and outdoor temperatures.

Vlastnosti produktu

• Atomic Time Accuracy: Automatically synchronizes with the WWVB atomic time signal for precise timekeeping.
• Jumbo 3" Easy-to-Read Numbers: Large digital display for clear visibility of time, date, and temperature.
• Indoor/Outdoor Temperature Display: Monitors both indoor ambient temperature and outdoor temperature via a wireless sensor.
• Bezdrôtový vonkajší senzor: Transmits outdoor temperature data to the main unit.
• Napájanie z batérie: Operates on batteries for flexible placement (batteries not included).
• Automatické nastavenie letného času (DST): Automatically adjusts for daylight saving time changes.
• Voliteľné časové pásma: Allows selection of various US time zones.
• 12/24 hodinový formát: Možnosť zobrazenia času v 12-hodinovom alebo 24-hodinovom formáte.
• Celsius/Fahrenheit Display: Switch between Celsius and Fahrenheit temperature units.

Obsah balenia

Pred pokračovaním v inštalácii sa uistite, že sú k dispozícii všetky položky.

• Sharp Atomic Clock Main Unit
• Bezdrôtový vonkajší snímač
• Návod na použitie

Note: Batteries are not included. The main unit requires 2 AA batteries, and the outdoor sensor requires 2 AA batteries.

Nastavenie

1. Inštalácia batérie

1. Open the battery compartment on the back of the main clock unit.
2. Insert 2 AA batteries, observing the correct polarity (+ and -).
3. Zatvorte kryt priestoru pre batérie.
4. Open the battery compartment on the wireless outdoor sensor.
5. Insert 2 AA batteries into the outdoor sensor, observing the correct polarity.
6. Close the outdoor sensor's battery compartment cover.

2. Počiatočná synchronizácia a nastavenia

After battery installation, the clock will attempt to receive the WWVB atomic time signal and connect to the outdoor sensor. This process may take several minutes or up to 24 hours depending on your location and environmental interference.

• Časové pásmo: Press the "TIME ZONE" button (often labeled "UP TIME ZONE") on the back of the clock to cycle through available time zones (PST, MST, CST, EST). Select your desired time zone.
• 12/24 hodinový formát: Press the "12/24" button to switch between 12-hour and 24-hour display.
• Celzia/Fahrenheita: Press the "°C/°F" button to toggle between Celsius and Fahrenheit temperature display.
• Outdoor Sensor Pairing: If the outdoor temperature does not appear, press the "CHANNEL" button on the main unit to search for the sensor signal. Ensure the outdoor sensor is within range and not obstructed.

For optimal signal reception, place the clock away from large metal objects, electronic devices, and areas with heavy concrete or brick walls. The outdoor sensor should be placed in a shaded, dry location, protected from direct sunlight and precipitation, for accurate readings.

Image: The Sharp Atomic Clock main unit displaying time, indoor temperature, date, and outdoor temperature, alongside its wireless outdoor sensor.

Prevádzka

Zobrazenie informácií

The clock's large LCD screen displays the following information:

• čas: Current time in selected 12-hour or 24-hour format.
• Indikátor PM: Displays "PM" for afternoon hours in 12-hour format.
• Indikátor atómového signálu: Shows the status of the WWVB atomic time signal reception.
• Vnútorná teplota: Aktuálna teplota meraná hlavnou jednotkou.
• Month/Date/Day: Current calendar information.
• Vonkajšia teplota: Current temperature measured by the wireless outdoor sensor.
• Outdoor Sensor Channel: Indicates the channel the outdoor sensor is transmitting on.
• Indikátor slabej batérie: An icon will appear when batteries are low and need replacement.

Button Functions (Rear Panel)

Údržba

• Výmena batérie: Replace batteries in both the main unit and outdoor sensor when the low battery indicator appears on the display. Always replace all batteries at the same time with new ones.
• Čistenie: Clean the clock and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Umiestnenie vonkajšieho snímača: Periodically check the outdoor sensor's location to ensure it remains protected from extreme weather conditions, direct sunlight, and moisture.

Riešenie problémov

• Clock not syncing with atomic time:
  • Ensure the clock is placed away from electronic interference (TVs, computers, microwaves).
  • Try placing the clock near a window facing Fort Collins, Colorado (if applicable to your region).
  • Press the "WAVE" button to initiate a manual signal search.
  • Počiatočná synchronizácia môže trvať až 24 hodín.
• Outdoor temperature not displaying or incorrect:
  • Check batteries in the outdoor sensor.
  • Ensure the outdoor sensor is within the effective transmission range (typically up to 100 feet, line of sight).
  • Press the "CHANNEL" button on the main unit to re-establish connection.
  • Verify the outdoor sensor is placed in a location protected from direct sunlight and rain, which can affect readings.
• Displej je tmavý alebo prázdny:
  • Replace all batteries in the main unit with fresh ones.
  • Uistite sa, že batérie sú vložené so správnou polaritou.
• Nesprávny čas alebo dátum:
  • Overte, či je vybraté správne časové pásmo.
  • Check if Daylight Saving Time (DST) setting is correct for your region.
  • If atomic signal is not received, manually set the time and date using the "TIME" and "CALENDAR" buttons.

Špecifikácie

Záruka a podpora

Sharp products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your product packaging or visit the official Sharp webstránky. Uschovajte si doklad o kúpe ako doklad o kúpe pre prípad reklamácie.