Hicon Ice Maker with LED Display and 2-in-1 Water Dispenser

Úvod

Thank you for choosing the Hicon Ice Maker with 2-in-1 Water Dispenser. This appliance is designed to provide convenient access to ice and cold water. Please read this manual thoroughly before operating the unit to ensure safe and efficient use. Keep this manual for future reference.

Bezpečnostné pokyny

• Uistite sa, že spotrebič je umiestnený na stabilnom, rovnom povrchu mimo dosahu priameho slnečného žiarenia a zdrojov tepla.
• Neponárajte spotrebič, napájací kábel ani zástrčku do vody ani iných kvapalín.
• Počas prevádzky držte deti mimo dosahu spotrebiča.
• Do výrobníka ľadu používajte iba pitnú vodu.
• Pred čistením alebo ak spotrebič dlhší čas nepoužívate, odpojte ho zo siete.
• Nepoužívajte spotrebič s poškodeným káblom alebo zástrčkou. V prípade potreby opravy kontaktujte kvalifikovaný servisný personál.
• Ensure proper ventilation around the unit. Maintain at least 10 cm of space around the sides and back.

Koniec produktuview

Familiarize yourself with the components of your Hicon Ice Maker.

Obrázok 1: Rozloženie ovládacieho panela
This image displays the control panel with buttons for power, ice size selection (Small, Medium, Large), and water dispensing. Indicator lights show when the ice basket is full, water is needed, or the unit is powered on.

Figure 2: Bullet-Shaped Ice Production
The ice maker produces popular bullet-shaped ice cubes, shown here with a water bottle installed on top for automatic water supply.

Nastavenie

Rozbalenie a umiestnenie

1. Odstráňte všetky obalové materiály a skontrolujte jednotku, či nie je poškodená.
2. Place the ice maker on a firm, level surface. Ensure there is adequate ventilation around the unit (at least 10 cm clearance on all sides).
3. Allow the unit to stand upright for at least 2-4 hours before plugging it in, especially if it was transported horizontally. This allows the refrigerant to settle.

Pridanie vody

The Hicon Ice Maker offers two methods for water supply:

Figure 3: Water Filling Methods
The left side shows automatic water addition using a 5-gallon bottle. The right side shows manual water addition by pouring water into the reservoir.

1. Automatic Water Supply (using a water bottle): Place a standard 2, 3, or 5-gallon water bottle onto the top dispenser opening. Ensure the bottle is securely seated.
2. Manuálny prívod vody: Open the top lid and pour potable water directly into the water reservoir until it reaches the maximum fill line. Do not overfill.

Poznámka: The melted ice water is recycled back into the reservoir for subsequent ice production cycles.

Návod na obsluhu

1. Zapnutie: Plug the appliance into a grounded electrical outlet. Press the ON/OFF button on the control panel to start the unit.
2. Vyberte veľkosť ľadu: Stlačte tlačidlo ICE CUBE SIZE SELECTION button repeatedly to cycle through the available ice sizes: Small (S), Medium (M), and Large (L). The corresponding indicator light will illuminate.
3. Výroba ľadu: The unit will begin the ice-making cycle. The first batch of ice may take 6-10 minutes. Subsequent batches will be produced continuously.
4. Indikátor plného ľadu: Keď je košík na ľad plný, ĽAD PLNÝ indicator light will illuminate, and the machine will pause ice production. Remove ice to resume operation.
5. Water Shorttage Indikátor: Ak je v nádrži málo vody, VODA KRÁTKYTAGE indicator light will illuminate. Add more water using either the automatic or manual method.
6. Dispense Cold Water: To dispense cold water, place a glass under the cold water tap and press the VODA button. The water nozzle can be extended and retracted.
7. Vypnúť: Stlačte tlačidlo ON/OFF tlačidlo na vypnutie spotrebiča.

Poznámka: The ice produced can remain in the basket for approximately 1-2 hours if the machine is turned off, but it is not a freezer and ice will eventually melt.

Údržba

Upratovanie

1. Pred čistením: Always unplug the ice maker from the power outlet.
2. Čistenie interiéru: Remove the ice basket. Clean the interior of the water reservoir and ice-making components with a soft cloth dampumyte jemným roztokom čistiaceho prostriedku. Dôkladne opláchnite čistou vodou.
3. Čistenie exteriéru: Vonkajší povrch utrite mäkkou handričkouamp plátno. Nepoužívajte abrazívne čistiace prostriedky ani rozpúšťadlá.
4. Odvodnenie: Periodically drain any remaining water from the reservoir using the drain plug located at the bottom or back of the unit (refer to specific model for exact location).
5. Odporúčanie pri prvom použití: For best taste, clean the unit thoroughly before its first use.

Skladovanie

If the ice maker will not be used for an extended period, drain all water, clean the unit, and allow it to dry completely before storing in a cool, dry place.

Riešenie problémov

Špecifikácie

• Značka: Hicon
• Model: B07S3JLSKY
• Rozmery produktu (H x Š x V): Rozmer 35.7 cm x 42.3 cm x 45.2 cm
• Kapacita výroby ľadu: Až 25 kg za 24 hodín
• Kapacita zásobníka ľadu: 1.2 kg
• Wattage: 160 wattov
• Voltage: 220 voltov
• chladivo: R600a
• Typ materiálu: Plastové
• UPC: 195893458158

Obrázok 4: Rozmery produktu
This diagram illustrates the physical dimensions of the ice maker for placement and installation planning.

Záruka a podpora

The Hicon Ice Maker comes with a jednoročná záruka od dátumu nákupu. Táto záruka sa vzťahuje na výrobné chyby za bežných podmienok používania.

For warranty claims, technical support, or any questions regarding your product, please contact Hicon customer service. Please have your model number (B07S3JLSKY) and proof of purchase ready when contacting support.

Hicon has over 10 years of experience in developing ice machines, ensuring advanced ice-making technology and excellent quality.