Návod na obsluhu zadného tlmiča Öhlins STX36 pre kolobežku HO919

1. Úvod

This manual provides essential information for the installation, operation, and maintenance of your Ohlins STX36 Scooter Rear Shock, model HO919. This high-performance shock absorber is designed to enhance the ride quality and handling of your 2019 Honda Z125M. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Bezpečnostné informácie

POZOR: Installation and service of shock absorbers should only be performed by qualified personnel with appropriate tools and experience. Improper installation or adjustment can lead to serious injury or damage to the vehicle.

• Počas inštalácie a údržby vždy používajte vhodné osobné ochranné prostriedky (OOP).
• Ensure the vehicle is securely supported before beginning any work.
• Never attempt to disassemble the shock absorber. It contains high-pressure gas and oil, which can cause injury if released improperly.
• Špecifické špecifikácie krútiaceho momentu a postupy nájdete v servisnej príručke vášho vozidla.
• After installation, always perform a functional check of the suspension and brakes before riding.

3. Produkt skončilview

The Ohlins STX36 Scooter Rear Shock (HO919) is a high-quality, adjustable mono-tube shock absorber. It features a 36mm piston diameter, designed for optimal performance and durability. Key components include the spring, spring preload adjuster, and damping adjusters (if equipped).

Image: Two Ohlins STX36 Scooter Rear Shocks, featuring bright yellow springs and silver-colored bodies, designed for rear suspension applications. The shocks are shown side-by-side, highlighting their robust construction and adjustable components.

4. Nastavenie a inštalácia

Poznámka: Pre tento produkt sa dôrazne odporúča profesionálna inštalácia.

1. Príprava: Secure the motorcycle on a stand, ensuring the rear wheel is off the ground. Remove any bodywork necessary to access the original rear shock absorber.
2. Removal of Original Shock: Carefully unbolt the original shock absorber from its upper and lower mounting points. Retain all original hardware unless new hardware is provided.
3. Installation of Ohlins Shock: Position the new Ohlins STX36 shock absorber. Install the upper and lower mounting bolts, ensuring they are correctly aligned. Do not fully tighten bolts at this stage.
4. Špecifikácie krútiaceho momentu: Refer to your Honda Z125M service manual for the correct torque specifications for the shock mounting bolts. Tighten all bolts to the specified values.
5. Kontrola prepustnosti: Before reassembling bodywork, check for adequate clearance between the shock absorber and all surrounding components throughout the full range of suspension travel.
6. Záverečné zhromaždenie: Reinstall any removed bodywork.

5. Obsluha a nastavenie

The STX36 shock absorber offers adjustability to fine-tune your scooter's handling characteristics. Always make adjustments in small increments and test the changes in a safe environment.

• Predpätie pružiny: Adjusting the spring preload changes the initial compression of the spring, affecting ride height and sag. Use the provided tool to turn the preload adjusters. Increase preload for a firmer ride or to compensate for heavier loads.
• Odskok Damping (if equipped): Odskok damping controls the speed at which the shock extends after compression. Adjustments are typically made via a clicker knob at the bottom of the shock. Turn clockwise for slower rebound, counter-clockwise for faster rebound.
• Kompresia Damping (if equipped): Kompresia damping controls the speed at which the shock compresses. Adjustments are typically made via a clicker knob on the reservoir or body. Turn clockwise for firmer compression, counter-clockwise for softer compression.

Consult an Ohlins authorized service center or a suspension specialist for personalized setup advice.

6. Údržba

Regular maintenance ensures the longevity and optimal performance of your Ohlins STX36 rear shock.

• Čistenie: Udržujte tlmič nárazov čistý od nečistôt, prachu a cestných nečistôt. Použite jemné mydlo a vodu a potom dôkladne opláchnite. Vyhnite sa priamemu kontaktu s tesneniami s vysokotlakovým čističom.
• Kontrola: Periodically inspect the shock for any signs of oil leaks, damage to the shaft, spring, or mounting points. Check for loose bolts.
• Servisné intervaly: Ohlins recommends regular service by an authorized service center. Service intervals depend on usage, but typically every 1-2 years or after significant mileage.
• Ukladací priestor: If storing the vehicle for an extended period, ensure the shock is clean and stored in a dry environment.

7. Riešenie problémov

This section addresses common issues you might encounter with your rear shock absorber.

If you experience issues not listed here or if the suggested solutions do not resolve the problem, contact an authorized Ohlins service center.

8. Špecifikácie

9. Záruka a podpora

Ohlins products are manufactured to high standards and come with a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official Ohlins website or contact your authorized Ohlins dealer.

For technical support, service, or spare parts, please contact an authorized Ohlins service center or visit the official Ohlins website for dealer locator information. Always provide your product model (HO919) and purchase details when seeking support.

Oficiálny Ohlins Webmiesto: www.ohlins.com