Behringer RX1202FX V2 12-Channel Analog Mixer with FX

Úvod

The Behringer RX1202FX V2 is a premium 12-input microphone/line mixer designed for professional audio applications. This 3U rack-mountable analog mixer offers ultra-low noise operation and versatile connectivity for various audio setups. It features high-quality XENYX microphone preamps, a warm 2-band 'British' EQ on each channel, and a studio-grade 24-bit multi-FX processor with 100 presets including reverb, chorus, flanger, delay, and pitch shifter.

This manual provides essential information for the safe and efficient operation of your RX1202FX V2 mixer. Please read it thoroughly before use and retain it for future reference.

Dôležité bezpečnostné pokyny

POZOR: To reduce the risk of electric shock, do not expose this appliance to rain or moisture. Do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.

• Prečítajte si tieto pokyny.
• Uschovajte si tieto pokyny.
• Dbajte na všetky varovania.
• Postupujte podľa všetkých pokynov.
• Toto zariadenie nepoužívajte v blízkosti vody.
• Čistite iba suchou handričkou.
• Neblokujte žiadne vetracie otvory. Inštalujte v súlade s pokynmi výrobcu.
• Neinštalujte v blízkosti zdrojov tepla, ako sú radiátory, ohrievače, kachle alebo iné zariadenia (vrátane amplifikátory), ktoré produkujú teplo.
• Nepotláčajte bezpečnostný účel polarizovanej alebo uzemňovacej zástrčky. Polarizovaná zástrčka má dve čepele, pričom jedna je širšia ako druhá. Uzemňovacia zástrčka má dve čepele a tretí uzemňovací kolík. Široká čepeľ alebo tretí hrot sú určené pre vašu bezpečnosť. Ak dodaná zástrčka nepasuje do vašej zásuvky, poraďte sa s elektrikárom o výmene zastaranej zásuvky.
• Chráňte napájací kábel pred tým, aby sa po ňom chodilo alebo aby nebol priškripnutý, najmä pri zástrčkách, zásuvkách a v mieste, kde vychádza zo zariadenia.
Používajte iba doplnky/príslušenstvo určené výrobcom.
• Odpojte toto zariadenie počas búrok s bleskami alebo keď sa dlhší čas nepoužíva.
• Všetok servis prenechajte kvalifikovanému servisnému personálu. Servis je potrebný, ak bolo zariadenie akýmkoľvek spôsobom poškodené, napríklad ak je poškodený napájací kábel alebo zástrčka, ak sa do zariadenia vyliala kvapalina alebo do neho spadli predmety, zariadenie bolo vystavené dažďu alebo vlhkosti, nefunguje normálne , alebo bola vypustená.

Nastavenie

1. Vybalenie a kontrola

Carefully unpack your RX1202FX V2 mixer. Inspect the unit for any signs of damage that may have occurred during transit. Retain the packaging materials for future shipping or if the unit needs to be returned for service.

2. Montáž do racku

The RX1202FX V2 is designed for standard 19-inch rack mounting, occupying 3U of rack space. Ensure adequate ventilation around the unit to prevent overheating. Do not block the ventilation openings.

3. Pripojenie napájania

Connect the supplied power cord to the AC/POWER inlet on the rear panel of the mixer and then to a suitable power outlet. Ensure the voltage matches the requirements specified on the unit. The mixer operates at 120 Volts.

4. Pripojenie vstupov

The RX1202FX V2 offers 12 input channels:

• Mikrofónové vstupy (kanály 1-8): Use balanced XLR cables for connecting microphones. These channels feature XENYX preamps.
• Linkové vstupy (kanály 1-12): Use balanced 1/4" TRS or unbalanced 1/4" TS cables for connecting line-level sources such as keyboards, drum machines, or other audio devices. Channels 9-12 are stereo line inputs.
• Vstup CD/pásky: Connect external playback devices (e.g., CD player, media player) using RCA cables to the CD/TAPE IN jacks.

5. Pripojenie výstupov

• Hlavné výstupy: Connect your main PA system or recording interface to the MAIN OUT (XLR) jacks.
• Výstupy riadiacej miestnosti: Connect your studio monitors to the CTRL OUT (1/4" TRS) jacks.
• Výstup pre slúchadlá: Connect headphones to the PHONES (1/4" TRS) jack for monitoring.
• Aux Sendy: Use the AUX SENDS (1/4" TS) to send signals to external effects processors or monitor mixes.
• Aux Returns: Connect the output of external effects processors to the AUX RETURNS (1/4" TS) jacks.

Obrázok: Rear panel of the Behringer RX1202FX V2 mixer. This view displays the AC power inlet, power switch, main XLR outputs, control room outputs, monitor outputs, CD/Tape inputs and outputs, Aux sends and returns, and the 8 XLR microphone inputs with corresponding 1/4" line inputs and inserts.

Návod na obsluhu

1. Zapnutie/vypnutie

After all connections are made, press the AC/POWER switch on the rear panel to turn the unit on. Always turn on your mixer before connecting power amplifiers or active speakers, and turn it off after them, to prevent loud thumps.

2. Channel Controls (Channels 1-12)

Obrázok: Front panel of the Behringer RX1202FX V2 mixer. This view highlights the individual channel strips with Gain, High EQ, Low EQ, MON (Monitor) send, FX send, PAN/BAL, and Level faders. The master section with the FX processor display, program knob, FX to Main/MON controls, CD/Tape controls, and Main Mix/Phones level controls is also visible.

• ZISK: Adjusts the input sensitivity for the microphone or line input. Use the CLIP LED as a guide; it should flash only occasionally on the loudest peaks.
• VYSOKÝ EQ: Adjusts the high-frequency content of the channel.
• NÍZKY EQ: Adjusts the low-frequency content of the channel.
• MON (Monitor) Send: Controls the amount of signal sent to the monitor output. This is pre-fader.
• Odoslať FX: Controls the amount of signal sent to the internal effects processor. This is post-fader.
• PAN/VYVÁŽENIE: Pans the mono signal (channels 1-8) or balances the stereo signal (channels 9-12) across the stereo main mix.
• Fader LEVEL: Upravuje celkovú výstupnú úroveň kanála pre hlavný mix.
• CLIP LED: Illuminates when the input signal is too high, indicating potential distortion. Reduce the GAIN if this LED lights up frequently.

3. Fantómové napájanie (+48 V)

For condenser microphones, activate the +48V PHANTOM switch on the rear panel. Ensure microphones are connected before engaging phantom power to prevent damage.

4. FX Processor

The RX1202FX V2 includes a 24-bit multi-effects processor with 100 presets. Use the PROGRAM knob to select the desired effect. The FX TO MAIN and FX TO MON controls in the master section adjust the amount of the effect signal sent to the main mix and monitor mix, respectively.

5. Ovládacie prvky hlavnej sekcie

• HLAVNÝ MIX Fader: Ovláda celkovú výstupnú úroveň hlavného stereo mixu.
• PHONES/CTRL ROOM Level: Adjusts the output level for the headphones and control room outputs.
• CD/TAPE TO MAIN/CTRL ROOM: Buttons to route the CD/Tape input to the main mix or control room/phones output.

Údržba

Upratovanie

Regularly clean the exterior of the mixer with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish. Keep faders and knobs free from dust and debris.

Skladovanie

When not in use for extended periods, store the mixer in a cool, dry environment, away from direct sunlight and extreme temperatures. If rack-mounted, ensure the rack provides adequate protection from dust and physical impact.

Riešenie problémov

Špecifikácie

Záruka

Behringer products, distributed by authorized MUSIC Tribe dealers, include a 3-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty information provided with your product or visit the official Behringer webstránky.

Podpora

If you encounter issues not covered in the troubleshooting section, or require further assistance, please contact your authorized Behringer dealer or visit the official Behringer support website for up-to-date information, FAQs, and service contact details.