Používateľská príručka k 2MP Pro Dome IP sieťovej kamere Milesight MS-C2972-FIPB

Koniec produktuview

The Milesight MS-C2972-FIPB is a 2MP Pro Dome IP Day/Night Network Camera designed for robust surveillance applications. It features remote focus and zoom capabilities, an IK10 vandal-proof and IP66 weather-resistant casing, and advanced imaging technologies like 140 dB WDR (Wide Dynamic Range) and Smart IR II for superior image quality in varying light conditions.

This camera supports H.265 video compression for efficient storage and bandwidth usage, and includes a 256GB MicroSD card slot for on-board storage. It is fully ONVIF compliant, ensuring broad compatibility with various network video recorders (NVRs) and video management systems (VMS).

Kľúčové vlastnosti

• Motorized Zoom and Focus: Allows for remote adjustment of the camera's field of view a ostrosť.
• IK10 Vandal-proof & IP66 Weather-resistant: Ensures durability and protection against impact and harsh environmental conditions, suitable for outdoor use.
• 140 dB WDR: Provides clear images in scenes with strong contrast, such as bright backlighting.
• Smart IR II: Advanced infrared technology for uniform illumination in low-light conditions, preventing overexposure of close objects.
• Kompresia H.265+: Reduces bandwidth and storage requirements significantly compared to older compression standards.
• 256GB MicroSD Support: Enables on-board storage for local recording and redundancy.
• Full ONVIF Compliance: Ensures interoperability with a wide range of surveillance equipment.
• SIP/VoIP Support: Integrates voice and video over IP for enhanced communication capabilities.

Nastavenie a inštalácia

Obsah balenia

Pred začatím inštalácie sa uistite, že sú prítomné všetky komponenty:

• Milesight MS-C2972-FIPB IP Camera
• Montážna šablóna
• Montážne skrutky a hmoždinky
• Vodotesný konektor pre ethernetový kábel
• Sprievodca rýchlym spustením

Montáž kamery

The MS-C2972-FIPB is designed for ceiling mount installation. Follow these steps:

1. Pripravte montážny povrch: Choose a suitable location on a ceiling or wall that can support the camera's weight and provides the desired field of view.
2. Detach the Mounting Plate: Rotate the camera body counter-clockwise to detach it from the mounting plate. This plate will be secured to the surface first.



3. Označiť vŕtacie otvory: Use the provided mounting template to mark the positions for drilling holes on the mounting surface.
4. Vŕtacie otvory: Drill holes according to the marked positions. Insert wall plugs if mounting on a masonry surface.
5. Bezpečná montážna doska: Pripevnite montážnu dosku k povrchu pomocou dodaných skrutiek.
6. Pripojovacie káble: Route the Ethernet cable through the mounting plate and connect it to the camera's RJ45 port. Ensure a waterproof connection using the supplied connector for outdoor installations. If not using PoE, connect the DC12V power supply.
7. Pripevnite telo fotoaparátu: Align the camera body with the mounting plate and rotate clockwise until it locks securely into place.

Network Connection and Initial Setup

The camera supports Power over Ethernet (PoE) for simplified installation, requiring only one Ethernet cable for both power and data. Alternatively, it can be powered by a 12V DC adapter.

1. Pripojiť k sieti: Connect the camera to your network switch or router using an Ethernet cable. If using PoE, ensure your switch supports PoE (802.3af).
2. Objavte fotoaparát: Use the Milesight Smart Tools software (available on the Milesight website) to discover the camera on your network.
3. Priradiť IP adresu: Assign a static IP address or configure DHCP for the camera.
4. Prístup Web Rozhranie: Otvorte a web prehliadač a zadajte IP adresu kamery pre prístup k jej web rozhranie.
5. Počiatočné prihlásenie: Log in using the default username and password (refer to the Quick Start Guide for default credentials). It is highly recommended to change the default password immediately for security.
6. Aktualizácia firmvéru: Skontrolujte a nainštalujte všetky dostupné aktualizácie firmvéru, aby ste zaistili optimálny výkon a zabezpečenie.

Obsluha fotoaparátu

Remote Focus and Zoom

The MS-C2972-FIPB features a motorized varifocal lens, allowing you to adjust the zoom and focus remotely from the camera's web interface or compatible NVR/VMS software. This eliminates the need for manual adjustment at the camera's physical location.

Konfigurácia videa

Access the "Video" settings in the web rozhranie na konfiguráciu:

• Rozlíšenie: Up to 1920x1080 (2MP).
• Snímková frekvencia: Adjust for desired smoothness of video.
• Kompresia: Select H.265+, H.265, H.264+, H.264, or MJPEG. H.265+ is recommended for efficiency.
• Bitová rýchlosť: Configure constant (CBR) or variable (VBR) bit rates.
• Nastavenia obrázka: Adjust brightness, contrast, saturation, sharpness, WDR, and noise reduction.
• Maskovanie súkromia: Define up to 8 areas to be masked for privacy concerns.

Konfigurácia zvuku

The camera includes a built-in microphone and supports two-way audio via an audio output interface. Configure audio settings under the "Audio" section:

• Kompresia zvuku: G.711, AAC, G.722, G.726.
• Zisk mikrofónu: Adjust sensitivity of the built-in microphone.
• Obojsmerný zvuk: Enable and configure for interactive communication.

Storage and Recording

The camera supports local storage on a MicroSD card up to 256GB. Configure recording schedules, motion detection recording, and continuous recording options in the "Storage" settings.

SIP/VoIP Integration

The MS-C2972-FIPB supports SIP/VoIP for voice and video-over-IP functionality. This allows for integration with VoIP systems for advanced communication and monitoring. Refer to the "System" or "Network" settings for SIP/VoIP configuration.

Údržba

Upratovanie

• Lens and Dome Cover: Regularly clean the camera lens and the transparent dome cover with a soft, clean cloth. For stubborn dirt, use a mild, non-abrasive cleaning solution specifically designed for optical surfaces. Avoid harsh chemicals that could damage the coating.
• Telo fotoaparátu: Utrite telo fotoaparátu reklamouamp handričkou na odstránenie prachu a nečistôt.

Aktualizácie firmvéru

Pravidelne kontrolujte oficiálne stránky Milesight. website for new firmware versions. Keeping the firmware updated ensures optimal performance, introduces new features, and addresses potential security vulnerabilities.

• Stiahnite si najnovší firmvér file from the Milesight support page.
• Prístup k fotoaparátu web interface and navigate to the "System" or "Maintenance" section.
• Follow the on-screen instructions to upload and install the firmware. Do not power off the camera during the update process.

Environmentálne aspekty

Although the camera is IP66 rated for weather resistance, extreme conditions can still affect performance. Ensure proper drainage around the camera if installed in areas prone to heavy rain or snow accumulation. Avoid direct exposure to prolonged strong sunlight if possible, as this can affect image quality and component lifespan.

Riešenie problémov

Špecifikácie

Záruka a podpora

Specific warranty details for the Milesight MS-C2972-FIPB camera are typically provided at the point of purchase or can be found on the official Milesight webstránky. Uschovajte si doklad o kúpe pre prípad reklamácie.

For technical support, product inquiries, or service requests, please visit the official Milesight support portal or contact their customer service. Contact information is usually available on the manufacturer's webstránky.

Note: This manual provides general guidance. For detailed technical specifications and advanced configurations, please refer to the complete product documentation available on the Milesight official webstránky.