MAIMEIMI GPS Speedometer 85mm (3-3/8") Instruction Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your MAIMEIMI 85mm GPS Speedometer. Designed for a wide range of applications including cars, tractors, trucks, boats, and marine vessels, this speedometer features a clear TFT screen, IP67 waterproof rating, and a wide 9-32VDC working voltage range. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Obsah balenia

Po otvorení balenia sa, prosím, uistite, že obsahuje všetky nasledujúce položky:

• 1 x GPS Speedometer (85mm / 3-3/8")
• 1 x GPS Antenna (3-meter cable length)
• 1 x Návod na použitie

Image: Contents of the MAIMEIMI GPS Speedometer package.

3. Vlastnosti produktu

• TFT Screen Display: Provides clear visibility of speed, odometer, trip meter, battery voltage, and course over ground (COG).
• Wide Voltage Rozsah: Operates on 9-32VDC, suitable for various vehicle types.
• Waterproof & Anti-fogging: IP67 rated for water and fog resistance, ensuring reliable performance in challenging environments.
• Multiple Unit Switching: Easily switch between kilometers per hour (km/h), miles per hour (mph), and knots (rounded to one decimal).
• Získanie GPS signálu: Initial signal acquisition takes approximately 30 seconds, with faster connections under clear skies.
• Odometer & Trip Meter: Odometer (0-999999km) is adjustable via the back button. Trip meter (0-999.9km) resets when power is off.
• Orientation Pointer: Displays Course Over Ground (COG) for directional awareness.

Image: Detailed display information of the GPS Speedometer.

Image: The speedometer undergoing a waterproof test.

4. Nastavenie a inštalácia

Follow these steps for proper installation of your GPS Speedometer:

1. Pripravte si montážny otvor: Open an 85mm (3 3/8") diameter hole in your panel. Ensure there is a 55mm (2 3/16") depth clearance behind the panel for the gauge body.
2. Vložte meradlo: Carefully place the speedometer into the prepared hole.
3. Secure the Gauge: Use the provided mounting ring to screw down and secure the gauge firmly in place.
4. Pripojiť vedenie:
   • Connect the Black wire to Ground (-).
   • Connect the Red wire to 9-30VDC power supply.
5. Pripojenie GPS antény: Plug the GPS antenna into the designated port on the back of the speedometer. The GPS antenna can be optionally mounted using 3M double-sided tape.

Image: Front and back dimensions of the GPS Speedometer.

Image: Basic wiring diagram for the speedometer.

Image: Step-by-step installation guide for the gauge.

5. Návod na obsluhu

Once installed and powered, the speedometer will begin searching for a GPS signal. After acquiring a signal, it will display speed and other data.

• Prepínanie jednotiek: To change the speed unit (km/h, mph, or knots), press the button located on the back of the speedometer. The unit will cycle through the options and save automatically.
• Odometer Adjustment: The odometer value can be adjusted using the button on the back.
• Počítadlo kilometrov: The trip meter automatically resets to zero when the power is turned off.

Image: Display showing selectable speed units.

6. Údržba

To ensure the longevity and optimal performance of your GPS Speedometer, follow these general maintenance guidelines:

• Regularly clean the screen and bezel with a soft, damp plátno. Vyhnite sa abrazívnym čistiacim prostriedkom.
• Uistite sa, že všetky káblové pripojenia sú bezpečné a bez korózie.
• Periodically check the GPS antenna for any damage or obstruction to maintain signal integrity.
• While the unit is IP67 waterproof, avoid prolonged submersion or high-pressure water jets.

7. Riešenie problémov

If you encounter any issues with your GPS Speedometer, consider the following common solutions:

• Žiadny GPS signál: Uistite sa, že anténa GPS má voľný view of the sky. Obstructions can block the signal. Allow up to 30 seconds for initial signal acquisition.
• Nesprávne čítanie rýchlosti: Verify that the correct unit (km/h, mph, knots) is selected. If the issue persists, ensure the GPS antenna is securely connected.
• Displej nefunguje: Skontrolujte všetky napájacie pripojenia, či sú bezpečné a či prijímajú správny prúd.tage (9-32V DC).
• Tlačidlá nereagujú: Ensure the unit is clean and free from debris around the buttons.

Ak problémy pretrvávajú aj po vykonaní týchto krokov, kontaktujte zákaznícku podporu so žiadosťou o ďalšiu pomoc.

8. Špecifikácie

9. Záruka a podpora

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official MAIMEIMI webstránky. Uschovajte si doklad o kúpe pre prípadné reklamácie.