EPEVER 3000W Pure Sine Wave Inverter (Model 3000W) Instruction Manual

1. Úvod

This manual provides essential information for the safe and efficient operation of your EPEVER 3000W Pure Sine Wave Inverter. This inverter converts 24V DC power to 110V AC power, suitable for various off-grid applications. It features a double closed-loop control algorithm for fast response and load impact resistance, ensuring stable and reliable power output.

Medzi kľúčové vlastnosti patrí:

3000W continuous power output, 6000W surge power for 5 seconds.
Kompatibilné s 24V lítiovými a olovenými batériami.
Rotatable LCD meter for monitoring and parameter configuration.
Remote control capability via phone apps and PC software.
Built-in electronic safeguards for comprehensive protection.

EPEVER 3000W Pure Sine Wave Inverter overview — Obrázok 1: Koniecview of the EPEVER 3000W Pure Sine Wave Inverter, highlighting its compatibility with 24V lithium and lead-acid batteries, 6000W surge power, remote control, and compliance with IEC62109, EN61000, RoHS standards.

2. Bezpečnostné pokyny

Pred inštaláciou a prevádzkou si pozorne prečítajte všetky bezpečnostné pokyny. Nedodržanie týchto pokynov môže mať za následok úraz elektrickým prúdom, požiar alebo vážne zranenie.

Zabezpečte správne uzemnenie meniča.
Do not expose the inverter to rain, snow, spray, or excessive dust.
Inštalujte menič na dobre vetranom mieste, aby ste predišli prehriatiu.
Neotvárajte menič casing; vo vnútri sa nenachádzajú žiadne časti, ktoré by mohol používateľ opraviť.
Disconnect all power sources before performing any wiring or maintenance.
Use appropriate wire gauges for all connections to prevent overheating and ensure efficient power transfer.
Udržujte deti mimo dosahu meniča a jeho pripojení.

Built-in electronic safeguards of the EPEVER inverter — Figure 2: The inverter includes built-in electronic safeguards such as input reverse polarity protection, inverter over temperature protection, over voltage protection, input voltage protection, overload protection, and output short circuit protection to prevent damage from installation errors or system failures.

3. Komponenty produktu

Familiarize yourself with the various parts of your EPEVER inverter:

EPEVER Inverter component diagram — Figure 3: Detailed diagram of the inverter's components. 1. DC input terminal positive, 2. DC input terminal negative, 3. Cooling fan, 4. LCD, 5. AC outlet, 6. RS485 communication port, 7. USB output port 5VDC/Max.1A, 8. External switch port, 9. Inverter switch, 10. Grounding terminal.

4. Nastavenie a inštalácia

Follow these steps for proper installation of your inverter:

4.1 Montáž

Vyberte si suché a dobre vetrané miesto mimo dosahu priameho slnečného žiarenia a zdrojov tepla.
Ensure adequate clearance around the inverter for airflow (minimum 150mm on all sides for air intake and outlet).
Mount the inverter securely to a stable surface using appropriate fasteners.

4.2 Zapojenie

The inverter features a push-on terminal design for easy wire installation without a screwdriver for the AC output. For DC input, use the screw terminals.

EPEVER Inverter wiring installation with push-on terminals — Figure 4: Wiring installation demonstrating the push-on terminal design for AC output. For multi-stranded wires, add solder to the connection point before inserting into the corresponding port. To remove, stop the inverter, insert a sharp tool into the small hole, and pull out the wiring.

Uzemnenie: Pripojte uzemňovaciu svorku (10) k uzemneniu.
Vstup DC: Connect the positive (1) and negative (2) DC input terminals to your 24V battery bank. Ensure correct polarity.
AC výstup: Connect your AC loads to the AC outlet (5). The push-on terminals simplify this connection.
Voliteľné pripojenia: Connect the RS485 communication port (6) or USB output port (7) for remote monitoring or charging devices.

4.3 Kompatibilita batérií

The inverter is compatible with both 24V lithium and lead-acid batteries (AGM/GEL/LFP).

EPEVER Inverter battery compatibility — Figure 5: The inverter is compatible with 24V lithium and lead-acid battery types, including AGM, GEL, and LFP. It incorporates surge current suppression technology to protect lithium batteries.

5. Návod na obsluhu

5.1 Zapnutie/vypnutie

To power on, ensure all connections are secure, then press the inverter switch (9). The LCD will illuminate.
To power off, press the inverter switch (9) again.

5.2 LCD displej a ovládacie prvky

The rotatable LCD meter (4) provides real-time status and allows parameter configuration.

EPEVER Inverter LCD display and controls — Figure 6: The LCD display (1) can be rotated 180 degrees for convenience. It features UP/Setting button (2), Fault indicator (red) (3), Working status indicator (Blue) (4), and DOWN/Enter button / Output ON/OFF button (5). The blue working status indicator shows solid for normal operation, slow flashing (1/4Hz) for standby, fast flashing (1Hz) for fault, and off when powered down.

5.3 Diaľkové monitorovanie

The inverter supports remote control and monitoring via phone applications and PC software using the RS485 communication port (6) or an optional eBox-WIFI-01 module.

EPEVER Inverter remote control setup — Figure 7: The inverter can be remotely controlled and monitored via smartphone apps (available on App Store and Google Play) or PC software, typically requiring an eBox-WIFI-01 module connected to the RS485 port.

5.4 Load Compatibility

The inverter is suitable for a wide range of daily appliances. Ensure the total wattage of connected appliances does not exceed the inverter's rated power.

EPEVER Inverter load compatibility examples — Obrázok 8: Pramples of compatible appliances include washing machines, TVs, refrigerators, drills, air conditioners, water pumps, laptops, and kettles. Always avoid overloading the inverter. Different types of loads have varying starting impulse currents; select an inverter model appropriate for your equipment's power, current, and load characteristics.

6. Údržba

Pravidelná údržba zaisťuje optimálny výkon a dlhú životnosť vášho meniča.

Čistenie: Pravidelne čistite vonkajší povrch meniča suchou handričkou. Uistite sa, že vetracie otvory sú bez prachu a nečistôt.
Spojenia: Pravidelne kontrolujte všetky elektrické pripojenia, aby ste sa uistili, že sú pevné a bez korózie.
Prostredie: Maintain a suitable operating environment, avoiding extreme temperatures and humidity.

7. Riešenie problémov

Ak sa vyskytnú problémy s meničom, pozrite si nasledujúce bežné problémy a riešenia:

Problém	Možná príčina	Riešenie
Menič sa nezapne	No DC input power; Loose battery connections; Low battery voltage	Skontrolujte pripojenia batérie a objtage; Ensure battery is charged; Verify inverter switch is ON.
Žiadny AC výstup	Overload; Short circuit; Over-temperature; Inverter fault	Reduce load; Check for short circuits in AC wiring; Allow inverter to cool; Check fault indicator on LCD.
Fault indicator (red) is on	Internal fault; Input/output protection triggered	Refer to the LCD display for specific error codes if available; Disconnect loads and restart inverter; If fault persists, contact support.
Nízky výstupný výkon	Nízky objem batérietage; Excessive load; Poor DC connections	Charge battery; Reduce load; Tighten DC connections.

8. Technické špecifikácie

Špecifikácia	Hodnota
Značka	EPEVER
Názov modelu	3000 W
Menovitý vstupný objemtage	24 V DC
Výstupný objemtage	110VAC (±3%); 120VAC (-7%~+3%)
Výstupná frekvencia	50/60 Hz ± 0.2 %
Nepretržitý výstupný výkon	3000 wattov
Peak Output Power (Surge)	6000 wattov (na 5 sekundy)
Priebeh elektrického výstupu	Čistá sinusová vlna
USB výstup	5V DC/Max.1A
Komunikačný port RS485	5 VDC / 200 mA
Kompatibilné typy batérií	24V Lithium and Lead-acid battery
Počet výstupov	1
Energy Specifications Met	IEC62109, EN61000, RoHS
Hmotnosť položky	23.2 libier

9. Informácie o záruke

This EPEVER inverter comes with a 1-ročná záruka from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications. Please retain your proof of purchase for warranty claims.

10. Zákaznícka podpora

For technical assistance, troubleshooting, or warranty inquiries, please contact EPEVER customer support through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (3000W) and purchase details ready.