LEDVANCE Linear LED Shelf Light 400mm

1. Úvod

This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE Linear LED Shelf Light. This versatile lighting solution is designed for various indoor applications, including kitchens, workspaces, and bathrooms (IP44 rated areas). It features a sleek design, uniform light distribution, and a long operational lifespan.

Pred inštaláciou si pozorne prečítajte tento návod a uschovajte si ho pre budúce použitie.

2. Bezpečnostné pokyny

• Elektrická bezpečnosť: Inštaláciu musí vykonať kvalifikovaný elektrikár alebo kompetentná osoba v súlade s miestnymi elektrotechnickými predpismi a predpismi. Pred inštaláciou, údržbou alebo opravou vždy odpojte napájanie hlavným ističom.
• Zamýšľané použitie: This product is designed for indoor lighting only. Do not use it in outdoor environments or areas not specified in the product description.
• Krytie IP44: The IP44 rating indicates protection against solid objects larger than 1mm and splashing water from any direction. This makes it suitable for use in bathrooms (Zone 2 and 3) and kitchens, but it is not submersible.
• Svetelný zdroj: This product contains a non-replaceable LED light source of energy efficiency class E. Do not attempt to replace the LED module yourself.
• Manipulácia: Avoid direct contact with the light source when the fixture is powered on, as it may be hot. Do not cover the fixture with insulating material.
• Čistenie: Only clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Obsah balenia

Pred začatím inštalácie skontrolujte, či sú všetky komponenty prítomné:

• 1 x LEDVANCE Linear LED Shelf Light (400mm)
• Complete mounting accessories (screws, wall plugs)
• Príslušenstvo na pripojenie

4. Špecifikácie

Poznámka: Špecifikácie sa môžu zmeniť bez predchádzajúceho upozornenia.

5. Nastavenie a inštalácia

The LEDVANCE Linear LED Shelf Light is designed for easy and quick wall mounting. Follow these steps carefully:

1. Pripravte si miesto inštalácie: Choose a suitable location for mounting, ensuring it is a dry, stable surface. For bathroom installations, ensure compliance with local wiring regulations for IP44 rated fixtures.
2. Odpojiť napájanie: Before starting any electrical work, turn off the power supply at the main circuit breaker to prevent electric shock.
3. Označte body vŕtania: Hold the fixture against the wall at the desired mounting position. Use a pencil to mark the locations for drilling holes for the mounting brackets. Refer to the product dimensions for accurate placement.

4. Vŕtacie otvory: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert the provided wall plugs into the drilled holes.
5. Pripevnite montážne konzoly: Pripevnite montážne konzoly k stene pomocou dodaných skrutiek. Uistite sa, že sú pevne pripevnené.
6. Elektrické pripojenie: Connect the fixture's electrical wires to your household wiring. Follow the wiring diagram provided with the product. Ensure all connections are secure and insulated. This fixture is designed for AC power.
7. Namontujte zariadenie: Carefully attach the LED shelf light to the installed mounting brackets. Ensure it clicks securely into place.
8. Obnoviť napájanie: Keď je svietidlo bezpečne namontované a zapojené, obnovte napájanie hlavným ističom.

6. Návod na obsluhu

This LED shelf light is equipped with an integrated PIR motion detector and a daylight sensor for automatic operation.

• Automatická prevádzka: The light will automatically turn on when motion is detected within its range and ambient light levels are below a certain threshold (daylight sensor).
• Automatické vypnutie: The light will automatically turn off after a period of no motion detection, or when sufficient ambient light is present.
• Umiestnenie snímača: Ensure the motion sensor is not obstructed to allow for optimal detection. Avoid placing the fixture near heat sources or in direct sunlight, which could interfere with sensor performance.

7. Údržba

The LEDVANCE Linear LED Shelf Light requires minimal maintenance.

• Čistenie: To clean the fixture, ensure the power is off. Wipe the surface with a soft, dry, or slightly damp handričkou. Nepoužívajte agresívne chemikálie, abrazívne čistiace prostriedky ani spreje priamo na zariadenie.
• Kontrola: Periodically inspect the fixture and wiring for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified technician.
• Svetelný zdroj: LED svetelný zdroj je integrovaný a používateľ ho nemôže vymeniť. Ak svetelný zdroj zlyhá, je potrebné vymeniť celé svietidlo.

8. Riešenie problémov

If you encounter issues with your LEDVANCE Linear LED Shelf Light, refer to the following common problems and solutions:

• Svetlo sa nezapne:
  • Skontrolujte, či je pripojený zdroj napájania a či je zapnutý istič.
  • Ensure the wiring connections are secure.
  • Verify that the ambient light is low enough for the daylight sensor to activate the light.
  • Check if motion is being detected by the PIR sensor.
• Svetlo svieti nepretržite:
  • Uistite sa, že v dosahu detekcie senzora sa nenachádza žiadny nepretržitý pohyb.
  • Check if the daylight sensor is being obstructed or if it's in a consistently dark area.
• Blikanie alebo mihotanie svetla:
  • Disconnect power and check all electrical connections for looseness or damage.
  • Zabezpečte objtage supply is stable and within the specified range (240V).

Ak tieto kroky problém nevyriešia, kontaktujte zákaznícku podporu.

9. Záruka a podpora

This LEDVANCE Linear LED Shelf Light comes with a 2-ročná záruka od dátumu nákupu, ktorá pokrýva chyby materiálu a spracovania pri bežnom používaní.

For warranty claims, technical support, or further assistance, please contact LEDVANCE customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number ready.