AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Produkt skončilview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Kľúčové vlastnosti:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Kompatibilita s Micro ATX: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Multimedia Access: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Špecifikácie

3. Inštalačná príručka

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 Rozbalenie

1. Opatrne vyberte skrinku počítača z obalu.
2. Remove any protective films or internal packaging materials.
3. Puzdro umiestnite na stabilný, rovný povrch.

3.2 Inštalácia základnej dosky

1. Odstráňte bočný panel z tvrdeného skla odskrutkovaním skrutiek s vrúbkovanou hlavou.
2. Install the I/O shield (if not pre-installed on your motherboard) into the rear opening of the case.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Základnú dosku upevnite pomocou dodaných skrutiek.

3.3 Inštalácia napájacieho zdroja

1. Locate the power supply mounting area at the bottom rear of the case.
2. Slide your power supply unit (PSU) into the designated bay.
3. Upevnite zdroj skrutkami zo zadnej strany skrinky.

3.4 Inštalácia úložného disku

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

3.5 Expansion Card (GPU) Installation

1. Odstráňte potrebné kryty rozširujúcich slotov zo zadnej strany skrinky.
2. Vložte grafickú kartu alebo iné rozširujúce karty do slotov PCIe na základnej doske.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 Chladiaci systém

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 Správa káblov

Na usporiadanie káblov využite výrezy na vedenie káblov a úchyty za priehradkou na základnú dosku. Zlepší sa tým prúdenie vzduchu a estetika.

4. Návod na obsluhu

4.1 Zapnutie/vypnutie

• To power on your PC, press the Sila tlačidlo umiestnené na hornom paneli.
• To power off, either shut down through your operating system or press and hold the Sila tlačidlo na niekoľko sekúnd.

4.2 Front Panel I/O Ports

The top panel provides convenient access to various ports:

• Port USB 3.0 (x1): Pre vysokorýchlostný prenos dát.
• Porty USB 2.0 (x2): Na pripojenie periférií.
• Konektor pre mikrofón: Pre audio vstup.
• HD Audio Jack: For audio output (headphones/speakers).
• Resetovacie tlačidlo: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Údržba

Pravidelná údržba pomáha zabezpečiť optimálny výkon a dlhú životnosť komponentov vášho počítača.

5.1 Čistenie prachového filtra

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 Všeobecné čistenie

• Utrite vonkajšiu stranu puzdra mäkkou handričkouamp plátno. Vyhnite sa abrazívnym čistiacim prostriedkom.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

6. Riešenie problémov

Ak sa vyskytnú problémy so skrinkou počítača, zvážte nasledujúce bežné kroky na riešenie problémov:

• Bez napájania: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Ventilátory sa neotáčajú/RGB nefunguje: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Prehrievanie: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• Porty na prednom paneli nefungujú: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Záruka a podpora

7.1 Informácie o záruke

The AeroCool HEXFORMBKV2 PC case comes with a 2-ročná záruka for parts. Please retain your proof of purchase for warranty claims.

7.2 Technická podpora

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's webmieste alebo na obale produktu.

• AeroCool Official Webmiesto: www.aerocool.io
• E -mail zákazníckej podpory: support@aerocool.io (Naprample, please verify on official webstránka)