Optex 990047 Indoor/Outdoor Wireless Digital Thermometer User Manual

Úvod

Thank you for choosing the Optex 990047 Indoor/Outdoor Wireless Digital Thermometer. This device provides accurate temperature readings for both your indoor environment and an outdoor location via a wireless sensor. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your thermometer.

Obsah balenia

• 1 x Optex 990047 Main Display Unit
• 1 x Bezdrôtový vonkajší senzor
• 1 x Návod na použitie
• (Batteries not included, typically requires AAA or AA batteries for both units)

Koniec produktuview

Familiarize yourself with the components of your Optex thermometer.

Main Display Unit (Front)

Obrázok: Predné view of the Optex 990047 main display unit. The digital screen shows indoor and outdoor temperatures, along with high/low records and trend indicators. Below the screen are three buttons: 'CH', '°C/°F', and 'CLEAR'.

• Digitálny displej: Shows indoor temperature (top) and outdoor temperature (bottom), along with HI/LO records and temperature trend arrows.
• Tlačidlo CH: Selects the wireless channel (if multiple sensors are used) or initiates sensor search.
• Tlačidlo °C/°F: Prepína medzi jednotkami teploty Celzia a Fahrenheita.
• Tlačidlo CLEAR: Clears the recorded HI/LO temperatures.

Main Display Unit (Back)

Obrázok: Späť view of the Optex 990047 main display unit. It features a battery compartment cover and an integrated kickstand for tabletop placement, as well as a hanging hole.

• Priestor na batériu: Houses the batteries for the main unit.
• Stojan: Allows the unit to stand upright on a flat surface.
• Otvor pre montáž na stenu: For hanging the unit on a wall.

Bezdrôtový vonkajší snímač

Obrázok: Predné view of the Optex wireless outdoor temperature sensor. It has a small digital display showing the current temperature and channel, along with a red indicator light and a battery compartment on the back.

• Snímač teploty: Measures the outdoor temperature.
• Indikátor prevodovky: A small LED light that flashes when data is transmitted.
• Priestor na batériu: Houses the batteries for the outdoor sensor.
• Prepínanie kanálov: (Typically inside the battery compartment) Allows selection of a specific channel (1, 2, or 3) if using multiple sensors.

Nastavenie

1. Install Batteries in the Outdoor Sensor:
   • Otvorte priehradku na batérie na zadnej strane bezdrôtového senzora.
   • Insert 2 x AAA batteries (not included) according to the polarity markings (+/-).
   • Zatvorte priehradku na batérie.
   • Note: If there is a channel switch inside the compartment, ensure it is set to Channel 1 for initial setup.
2. Install Batteries in the Main Display Unit:
   • Otvorte priehradku na batérie na zadnej strane hlavnej zobrazovacej jednotky.
   • Insert 2 x AAA batteries (not included) according to the polarity markings (+/-).
   • Zatvorte priehradku na batérie.
   • The display will light up and begin searching for the outdoor sensor.
3. Spárovanie snímača:
   • Place the outdoor sensor and the main display unit close to each other during the initial setup.
   • The main unit should automatically detect and connect to the outdoor sensor within a few minutes. The outdoor temperature will appear on the display.
   • If the outdoor temperature does not appear, press and hold the "CH" button on the main unit for 3 seconds to initiate a manual search for the sensor.
4. Umiestnenie vonkajšieho snímača:
   • Choose a shaded location for the outdoor sensor, away from direct sunlight and rain, to ensure accurate readings.
   • Avoid placing it near heat sources (e.g., vents, appliances) or metal objects that could interfere with the wireless signal.
   • The maximum wireless range is approximately 30 meters (100 feet) in open air. Walls and obstacles will reduce this range.

Prevádzka

Namerané teploty

The main display unit shows the indoor temperature at the top and the outdoor temperature (from the wireless sensor) at the bottom. Both displays show the current temperature, along with the recorded high (HI) and low (LO) temperatures for the day, and a trend indicator.

Prepínanie jednotiek teploty (°C/°F)

Stlačte tlačidlo ° C/° F button once to switch between Celsius and Fahrenheit temperature units.

Clearing HI/LO Records

The thermometer automatically records the highest and lowest temperatures since the last reset. To clear these records and start new ones, press the CLEAR button once. The HI/LO values will reset to the current temperature.

Channel Selection (for multiple sensors)

If you are using multiple outdoor sensors (sold separately), you can switch between their readings by pressing the CH button. Each press will cycle through the available channels (e.g., CH1, CH2, CH3). Ensure each sensor is set to a unique channel via its internal switch.

Údržba

• Čistenie: Utrite jednotky mäkkou handričkouamp plátno. Nepoužívajte abrazívne čistiace prostriedky ani rozpúšťadlá.
• Výmena batérie: Keď sa na displeji zobrazí indikátor slabej batérie, vymeňte batérie v hlavnej jednotke aj vo vonkajšom senzore. Vždy vymeňte všetky batérie naraz za nové rovnakého typu.
• Ukladací priestor: If storing the thermometer for an extended period, remove all batteries to prevent leakage. Store in a cool, dry place.

Riešenie problémov

Špecifikácie

• Model: Optex 990047
• Typ zobrazenia: Digitálny LCD
• Rozsah vnútornej teploty: -10 °C až 50 °C (14 °F až 122 °F) (Estimated, based on typical indoor thermometers)
• Rozsah vonkajších teplôt: -40 °C až 60 °C (-40 °F až 140 °F) (Estimated, based on typical outdoor sensors)
• Presnosť teploty: +/- 1 °C (+/- 2 °F) (odhad)
• Bezdrôtový dosah: Až 30 metrov (100 stôp) na otvorenom priestranstve (odhad)
• Zdroj napájania (hlavná jednotka): 2 x AAA 1.5V batérie (nie sú súčasťou balenia)
• Zdroj napájania (vonkajší senzor): 2 x AAA 1.5V batérie (nie sú súčasťou balenia)
• Materiál: Plastové
• Farba: Čierna

Bezpečnostné informácie

• Nevystavujte hlavnú jednotku ani senzor extrémnym teplotám, priamemu slnečnému žiareniu alebo nadmernej vlhkosti.
• Do not immerse the units in water. The outdoor sensor is weather-resistant but not waterproof.
• Do not attempt to disassemble or repair the units. This will void the warranty.
• Staré batérie zlikvidujte zodpovedne v súlade s miestnymi predpismi.
• Batérie uchovávajte mimo dosahu detí.

Záruka a podpora

Optex products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Optex webstránka. Pri kontaktovaní podpory si, prosím, pripravte číslo modelu (990047).