1. Úvod
Ďakujem za nákupasing the Alecto ADB20 Wireless Doorbell. This manual provides essential information for the safe and efficient use of your new doorbell system. Please read these instructions carefully before installation and retain them for future reference.
The Alecto ADB20 is a wireless doorbell system designed for ease of installation and reliable performance. It features an IP56 waterproof outdoor transmitter and a portable indoor receiver, offering a range of up to 200 meters in open areas and 50 meters indoors. With 52 selectable melodies and 5 adjustable volume levels, you can customize your doorbell experience. The system is also expandable, allowing connection of up to 6 additional receivers.
2. Obsah balenia
Prosím, skontrolujte, či sú všetky položky prítomné a v dobrom stave:
- 1 x Wireless Doorbell Transmitter (Outdoor Unit)
- 1 x Wireless Doorbell Receiver (Indoor Unit)
- 1 x A23 (12V) Battery for Transmitter
- 1 x obojstranná lepiaca páska
- Montážne skrutky a hmoždinky
- User Manual (English and other languages)
3. Bezpečnostné pokyny
- Do not expose the receiver to rain or moisture. The transmitter is IP56 waterproof, suitable for outdoor use, but avoid submerging it in water.
- Nepokúšajte sa otvárať ani opravovať jednotky sami. Všetok servis zverte kvalifikovanému personálu.
- Use only the specified battery type (A23 12V) for the transmitter. Ensure correct polarity when inserting batteries.
- Použité batérie zlikvidujte zodpovedne v súlade s miestnymi predpismi.
- Batérie uchovávajte mimo dosahu detí. Pri požití okamžite vyhľadajte lekársku pomoc.
- Avoid placing the receiver near strong electromagnetic fields, which may interfere with its operation.
4. Nastavenie a inštalácia
4.1 Installing the Transmitter (Outdoor Unit)
- Vložte batériu: Open the back cover of the transmitter. Insert the supplied A23 (12V) battery, ensuring the correct positive (+) and negative (-) polarity. Close the cover securely.
- Vyberte umiestnenie: Select a suitable location near your front door. Ensure the surface is clean and dry. The transmitter is IP56 waterproof, making it suitable for outdoor installation.
- Montáž: Máte dve možnosti montáže:
- Lepiaca páska: Peel off one side of the double-sided adhesive tape and stick it to the back of the transmitter. Peel off the other side and firmly press the transmitter onto the desired surface for at least 30 seconds.
- Skrutky: Use the provided screws and wall plugs to securely attach the transmitter to the wall. Mark the drill points, drill holes, insert wall plugs, and then screw the transmitter into place.

Image: The Alecto ADB20 wireless doorbell transmitter unit, showing the large central button.
4.2 Setting Up the Receiver (Indoor Unit)
- Zapnutie: The receiver is battery operated. Insert the required batteries (type not specified in product details, typically AA or AAA, please check the unit's battery compartment for specific type and quantity).
- umiestnenie: Place the receiver in a convenient location within your home where you can easily hear the doorbell. Consider the maximum indoor range of 50 meters (up to 200 meters in open areas) when choosing a spot.
- Párovanie (ak je to potrebné): The units are usually pre-paired from the factory. If they do not connect automatically, refer to the troubleshooting section or the full manual for pairing instructions. The ADB20 uses an encrypted signal to prevent interference.

Image: The Alecto ADB20 wireless doorbell receiver unit, showing the speaker grille and controls.

Obrázok: Zadná strana view of the Alecto ADB20 receiver, showing the battery compartment and mounting options.
5. Návod na obsluhu
5.1 Zmena melódií
The Alecto ADB20 offers 52 different melodies. To change the melody:
- Locate the melody selection button on the side of the receiver unit.
- Press the button repeatedly to cycle through the available melodies. Each press will play the next melody.
- Once you hear a melody you like, stop pressing the button. The selected melody will be saved and used for future doorbell rings.
5.2 Nastavenie hlasitosti
The receiver has 5 adjustable volume levels, ranging from 0 dB (mute) to 110 dB (maximum volume). To adjust the volume:
- Locate the volume control button on the side of the receiver unit.
- Press the button repeatedly to cycle through the 5 volume levels. Each press will adjust the volume up or down.
- Vyberte požadovanú úroveň hlasitosti.
5.3 Rozšírenie systému
The Alecto ADB20 system is expandable. You can add up to 6 additional receivers to your existing doorbell transmitter. This is useful for larger homes or multi-story buildings to ensure the doorbell can be heard in various locations.
To add an additional receiver, follow the pairing instructions provided with the new receiver unit. Typically, this involves putting the receiver into a pairing mode and then pressing the transmitter button.
6. Údržba
6.1 Výmena batérie
- Vysielač: When the doorbell button no longer activates the receiver, or the range significantly decreases, it may be time to replace the A23 (12V) battery in the transmitter. Open the back cover, remove the old battery, insert a new one with correct polarity, and close the cover.
- Prijímač: If the receiver stops sounding or its volume becomes low, replace its batteries (refer to the battery type indicated in the receiver's battery compartment).
6.2 Čistenie
Wipe the doorbell units with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or internal components. The transmitter is waterproof, but avoid using high-pressure water jets directly on it.
7. Riešenie problémov
| Problém | Možná príčina | Riešenie |
|---|---|---|
| Zvonček nezvoní | Dead batteries in transmitter or receiver. Units are not paired. Receiver is out of range. | Replace batteries in both units. Re-pair the transmitter and receiver (refer to full manual if needed). Move receiver closer to transmitter. |
| Krátky prevádzkový dosah | Weak batteries. Obstacles (thick walls, metal structures) between units. Interference from other devices. | Replace batteries. Relocate receiver to a position with fewer obstructions. Ensure no other wireless devices are causing interference. |
| Receiver rings unexpectedly | Interference from another wireless device. | The ADB20 uses an encrypted signal to minimize this. If it occurs, try re-pairing the units or moving the receiver. |
| Cannot change melody or volume | Tlačidlá nefungujú správne. | Ensure batteries are fresh. If problem persists, contact customer support. |
8. Špecifikácie
- Model: ADB20
- Výrobca: Alecto
- Farba: Biela
- Zdroj napájania vysielača: 1 x A23 (12V) Alkaline Battery (Included)
- Zdroj napájania prijímača: Batteries (Type to be confirmed on unit, typically AA/AAA)
- Vodotesnosť (vysielač): IP56
- Prevádzkový rozsah: Up to 200 meters (open field), up to 50 meters (indoors)
- Melódie: 52 voliteľné
- Úrovne hlasitosti: 5 (0 dB až 110 dB)
- Rozšíriteľnosť: Up to 6 additional receivers
- Rozmery (vysielač): 8.1 x 2.5 x 8.1 cm
- Hmotnosť produktu: 150 g (celkové balenie)
9. Záruka a podpora
The Alecto ADB20 Wireless Doorbell comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Alecto webpodrobné záručné podmienky nájdete na stránke.
For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact your retailer or the Alecto customer service department. Contact information can typically be found on the manufacturer's webmieste alebo na obale produktu.