Wallpad L6
Wallpad L6 Gold Brushed Aluminum Wall Module User Manual
Model: L6 - Dual USB Charging Module
1. Úvod
This manual provides detailed instructions for the installation, operation, and maintenance of the Wallpad L6 Gold Brushed Aluminum Wall Module, specifically the dual USB charging variant. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.
2. Bezpečnostné pokyny
- Inštaláciu musí vykonať kvalifikovaný elektrikár v súlade s miestnymi elektrotechnickými predpismi a predpismi.
- Always disconnect power at the circuit breaker before installing or servicing the module.
- Neinštalujte vo vlhku alebo damp miest.
- Uistite sa, že sú všetky káblové spojenia bezpečné a správne izolované.
- Do not exceed the specified electrical ratings of the module.
- Uchovávajte mimo dosahu detí.
3. Obsah balenia
Pred začatím inštalácie skontrolujte, či sú všetky komponenty prítomné:
- Wallpad L6 Gold Brushed Aluminum Wall Module (Dual USB Charging)
- Montážne skrutky
- Používateľská príručka (tento dokument)
Note: Other modules (e.g., EU French Socket, Wall Switch) are sold separately and may have different installation requirements.
4. Nastavenie a inštalácia
This section outlines the general steps for installing the Wallpad L6 module. Professional installation is recommended.
- Pripravte si miesto inštalácie: Uistite sa, že je napájanie miesta inštalácie vypnuté hlavným ističom.
- Overenie kompatibility: The Wallpad L6 module is designed for an 86 Type Square Box. Round boxes are not compatible.
- Pripojiť vedenie: Connect the live, neutral, and ground wires to the corresponding terminals on the back of the module. Refer to the wiring diagram provided with the product packaging for specific connections.
- Namontujte modul: Carefully place the module into the 86 Type Square Box. Secure it using the provided mounting screws. Ensure the module is flush with the wall surface.
- Pripevnite čelný panel: Secure the brushed aluminum faceplate onto the module.
- Obnoviť napájanie: Po dokončení inštalácie a zabezpečení všetkých pripojení obnovte napájanie ističom.

Obrázok 4.1: Späť view of the Wallpad L6 module showing dimensions (86mm x 86mm, 60mm depth, 66.5mm screw distance) and an 86 Type Square Box. This module requires an 86 Type Square Box for proper installation; round boxes are not compatible.
5. Operating Instructions (Dual USB Charging Module)
The Wallpad L6 Dual USB Charging Module provides convenient power for charging compatible devices.

Obrázok 5.1: Predné view of the Wallpad L6 dual USB charging module. It features two USB-A ports and a red LED indicator light at the top.
- Pripojiť zariadenie: Plug your USB charging cable into one of the two USB-A ports on the module.
- Indikácia nabíjania: The red indicator light (if present and active) will illuminate to show that the module is powered and ready to charge.
- Nabíjanie: Connect the other end of your USB cable to your compatible electronic device (e.g., smartphone, tablet). The device should begin charging automatically.
- Odpojiť: Once charging is complete, safely disconnect your device and then the USB cable from the module.
Note: The Wallpad L6 series also offers other modules like EU French Sockets and Wall Switches, which operate according to their specific functions. The images below illustrate examples of these other modules within the L6 series.

Obrázok 5.2: Bývalýample of a Wallpad L6 EU French Socket module, showcasing its design within a living space.

Obrázok 5.3: Bývalýample of a Wallpad L6 wall switch module, featuring a satin aluminum panel and illuminated touch buttons.
6. Údržba
- Čistenie: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the module. Do not use abrasive cleaners, solvents, or excessive moisture.
- Kontrola: Periodically inspect the module for any signs of damage, loose connections, or discoloration. If any issues are found, disconnect power and consult a qualified electrician.
7. Riešenie problémov
| Problém | Možná príčina | Riešenie |
|---|---|---|
| Module not charging devices. |
|
|
| Module is loose in the wall. | Nesprávna montáž. | Disconnect power, tighten mounting screws. Ensure an 86 Type Square Box is used. |
| Red indicator light is off. | Modul nie je napájaný. | Check circuit breaker and wiring connections. Consult a qualified electrician if necessary. |
8. Špecifikácie
- Model: Wallpad L6 (Dual USB Charging)
- Materiál: Gold Brushed Aluminum Panel
- Kompatibilita: 86 Type Square Box
- Rozmery: Approximately 86mm x 86mm (Front Panel)
- USB výstup: Please refer to product packaging for exact USB output specifications.
- Dátum prvej dostupnosti: 4. apríla 2024
9. Záruka a podpora
For warranty information and technical support, please refer to the documentation included with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.
For further assistance, you may visit the official Wallpad webalebo kontaktujte ich oddelenie služieb zákazníkom.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.