JVC HA-XC72T Wireless Headphones User Manual

Úvod

Ďakujem za nákupasing the JVC HA-XC72T Wireless Headphones. This manual provides essential information for the safe and effective use of your device. Please read it thoroughly before use and keep it for future reference.

Bezpečnostné informácie

• Jednotku nerozoberajte, neopravujte ani neupravujte.
• Nevystavujte jednotku extrémnym teplotám, priamemu slnečnému žiareniu alebo vysokej vlhkosti.
• Keep the unit away from water and other liquids, except for its specified water resistance.
• Do not use the unit at excessively high volumes for extended periods to prevent hearing damage.
• Uchovávajte mimo dosahu detí. Malé časti môžu predstavovať nebezpečenstvo udusenia.

Obsah balenia

Overte, či sú v balení všetky položky:

• JVC HA-XC72T Wireless Headphones (Left and Right earbuds)
• Nabíjacie puzdro
• USB nabíjací kábel
• Earpieces (S/M/L sizes)
• "XX" Logo Sticker

Nastavenie

1. Nabíjanie slúchadiel a puzdra

Pred prvým použitím úplne nabite slúchadlá a nabíjacie puzdro.

1. Place both left and right earphones into the charging case.
2. Connect the USB charging cable to the charging case and a USB power adapter (not included).
3. Indikátor nabíjania lamps on the case will show the charging status. Once fully charged, the lamps will change or turn off.

The JVC HA-XC72T charging case with earbuds, held in a hand, highlighting the long battery life of up to 21 hours (9 hours from earbuds + 12 hours from case). Actual playback time may vary.

2. Párovanie pomocou Bluetooth

Pripojenie slúchadiel k zariadeniu:

1. Take both earphones out of the charging case. They will automatically enter pairing mode. The indicator lamp on one earbud will flash rapidly.
2. Na svojom zariadení (smartfón, tablet atď.) povoľte Bluetooth a vyhľadajte dostupné zariadenia.
3. Select "HA-XC72T" from the list of found devices.
4. Once connected, the indicator lamp prestane blikať.

Návod na obsluhu

Zapnutie/vypnutie

• Zapnutie: Vyberte slúchadlá z nabíjacieho puzdra. Automaticky sa zapnú.
• Vypnúť: Place the earphones back into the charging case. They will power off automatically and begin charging.

Music Playback and Volume Control

The HA-XC72T features touch controls on each earbud.

• Prehrať/pozastaviť: Raz klepnite na dotykový senzor na ktoromkoľvek slúchadle.
• Ďalšia skladba: Tap the touch sensor on the right earbud twice.
• Predchádzajúca skladba: Tap the touch sensor on the left earbud twice.
• Zvýšiť hlasitosť: Tap the touch sensor on the right earbud three times.
• Znížiť hlasitosť: Tap the touch sensor on the left earbud three times.

Noise Cancelling / Ambient Sound Mode

The headphones offer Active Noise Cancellation and a Quick Ambient Sound function.

A person wearing the JVC HA-XC72T earbud, with visual representation of noise cancellation waves, emphasizing the ability to enjoy sound in quiet environments.

• Prepínanie režimov: Press and hold the touch sensor on the left earbud for approximately 2 seconds to cycle through Noise Cancelling ON, Ambient Sound ON, and Noise Cancelling OFF.
• Quick Ambient Sound: This function allows you to hear your surroundings without removing the earphones, useful for conversations.

Režim nízkej latencie

This mode reduces audio delay, enhancing the experience for gaming and video playback.

A person enjoying video content on a smartphone while wearing the JVC HA-XC72T earbuds, illustrating the low latency mode for synchronized audio and video.

• Aktivovať/deaktivovať: Press and hold the touch sensor on the right earbud for approximately 2 seconds to toggle Low Latency Mode ON/OFF.

Hands-free telefonovanie

• Prijať/Ukončiť hovor: Raz klepnite na dotykový senzor na ktoromkoľvek slúchadle.
• Odmietnuť hovor: Press and hold the touch sensor on either earbud for approximately 2 seconds.

Jedno použitie slúchadiel

Either the left or right earbud can be used independently for music playback or calls.

Údržba

Aby ste zaistili dlhú životnosť a výkon vašich slúchadiel:

• Slúchadlá a nabíjacie puzdro pravidelne čistite mäkkou, suchou handričkou.
• Nepoužívajte abrazívne čistiace prostriedky ani rozpúšťadlá.
• Ensure the earphones are dry before placing them back into the charging case.
• Keď slúchadlá nepoužívate, uložte ich do nabíjacieho puzdra, aby ste ich chránili pred prachom a poškodením.

The JVC HA-XC72T earbuds on a wet surface, demonstrating their IP55 water and dust resistance, suitable for outdoor use. Note: IP55 rating applies to the earbud body only.

Riešenie problémov

If you encounter issues with your HA-XC72T headphones, refer to the following common solutions:

No Sound from One Earbud (or other pairing issues)

If only one earbud is producing sound, or if you experience other pairing difficulties, try the following steps:

1. Place both left and right earphones back into the charging case.
2. Take both left and right earphones out of the case simultaneously. Check if the issue is resolved.
3. If the issue persists, delete the "HA-XC72T" Bluetooth registration from your device's Bluetooth settings and attempt to re-pair.
4. If the above steps do not resolve the issue, perform a factory reset (initialization) as follows:

Factory Reset (Initialization) Steps:

1. Place both left and right earphones into the charging case. Ensure the charging lamps are lit, indicating they are charging.
2. While the earphones are in the case, press and hold the touch sensors on both the left and right earphones for approximately 15 seconds. The lamp will blink or its reaction will change, indicating initialization is in progress. Perform this for both earbuds.
3. Release your fingers from the touch sensors and close the charging case lid.
4. Wait for approximately 10-20 seconds.
5. Take both left and right earphones out of the case simultaneously. The earphones will begin synchronizing with each other again.
6. On your smartphone or device, open the Bluetooth settings. If "HA-XC72T" is still listed, select "Forget Device" or "Delete Device".
7. Perform the Bluetooth pairing process again from step 1 of the "Bluetooth Pairing" section.

Žiadna sila

• Uistite sa, že nabíjacie puzdro a slúchadlá sú úplne nabité.
• Skontrolujte, či je nabíjací kábel bezpečne pripojený.

Nízka kvalita zvuku

• Ensure the earphones are properly seated in your ears. Try different earpiece sizes for a better seal.
• Pre zníženie rušenia sa priblížte k pripojenému zariadeniu.
• Vyčistite všetky nečistoty z trysiek slúchadiel.

Špecifikácie

Záruka

This product comes with a 1-year manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Podpora

For further assistance, technical support, or warranty inquiries, please contact JVC customer service through their official webstránku alebo kontaktné informácie uvedené na obale produktu.