Aigo AC SE 360 Rainbow 360mm Water Cooler Instruction Manual

1. Úvod

Thank you for choosing the Aigo AC SE 360 Rainbow 360mm Water Cooler. This all-in-one liquid cooling solution is designed to provide efficient thermal management for your high-performance CPU, featuring a 360mm triple radiator and vibrant ARGB lighting. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your product.

Image 1.1: Aigo AC SE 360 Rainbow 360mm Water Cooler assembled view.

2. Bezpečnostné informácie

• Pred inštaláciou alebo údržbou vždy odpojte počítač od napájania.
• S komponentmi manipulujte opatrne, aby ste predišli ich poškodeniu.
• Zabezpečte správne uzemnenie, aby ste predišli úrazu elektrickým prúdom.
• Chráňte výrobok pred vlhkosťou a extrémnymi teplotami.
• Nepokúšajte sa otvoriť čerpadlo ani chladič, pretože by to mohlo viesť k strate záruky a spôsobiť úniky.
• Uchovávajte mimo dosahu detí.

3. Obsah balenia

Overte, či sú v balení všetky nižšie uvedené komponenty:

• 1x Aigo AC SE 360 Water Cooler Unit (Radiator, Pump/CPU Block, Tubing)
• 3x 120 mm ARGB ventilátory
• Mounting Hardware for Intel Sockets (LGA 115X, 1200, 1700, 2011, 2066)
• Mounting Hardware for AMD Sockets (AM2, AM3, AM4, AM5)
• Termálna pasta
• Fan Screws and Radiator Screws
• ARGB Controller (if included with your specific model)

Image 3.1: All components included in the Aigo AC SE 360 package.

4. Nastavenie a inštalácia

Follow these steps for proper installation of your Aigo AC SE 360 Water Cooler:

1. Pripravte si základnú dosku: Install the appropriate backplate and standoffs for your CPU socket (Intel: 115X, 1200, 1700, 2011, 2066; AMD: AM2, AM3, AM4, AM5). Refer to your motherboard manual for specific instructions.
2. Naneste termálnu pastu: Clean the CPU surface. Apply a small amount of thermal paste to the center of the CPU IHS (Integrated Heat Spreader).
3. Mount the CPU Block/Pump: Carefully place the CPU block onto the CPU, aligning it with the standoffs. Secure it with the provided screws, tightening them in a diagonal pattern until snug. The magnetic block design allows for easy rotation to align the logo or tubing as desired.
4. Install Fans to Radiator: Attach the three 120mm ARGB fans to the radiator using the longer screws provided. Ensure the fan airflow direction is correct for your case configuration (typically blowing air through the radiator).
5. Montáž chladiča: Install the radiator assembly into your PC case. The 360mm radiator is compatible with most ATX cases that support this size. Secure it with the appropriate screws.
6. Connect Fans (Daisy Chain): The fans feature a daisy chain connection system. Connect the fans to each other in series, then connect the final fan's cable to the motherboard's fan header or an ARGB controller. This simplifies cable management by reducing the number of cables.
7. Pripojenie ARGB osvetlenia: Connect the ARGB cables from the fans and pump to a 3-pin, 5V ARGB header on your motherboard or a dedicated ARGB controller. Ensure the voltage is correct (5V) to prevent damage.
8. Connect Pump Power: Connect the pump's 4-pin power connector to a dedicated AIO_PUMP or CPU_FAN header on your motherboard.
9. Správa káblov: Organize all cables neatly to ensure proper airflow and a clean build.

5. Návod na obsluhu

Once installed, the Aigo AC SE 360 Water Cooler operates automatically to maintain optimal CPU temperatures. Here are key operational aspects:

• Automatické chladenie: The pump and fans will adjust their speed based on CPU temperature, ensuring efficient cooling. The pump operates at 12V with 3200 RPM, and fans operate between 800-1800 RPM.
• Ovládanie ARGB osvetlenia: The Rainbow ARGB lighting can be controlled via your motherboard's ARGB software (if connected to a compatible header) or through an included ARGB controller. This allows for various lighting effects and synchronization with other ARGB components.
• Úroveň hluku: The cooler is designed for quiet operation, with a noise level of approximately 30 dB.

6. Údržba

Regular maintenance helps ensure the longevity and performance of your water cooler:

• Čistenie prachu: Pravidelne čistite rebrá chladiča a lopatky ventilátora, aby ste predišli hromadeniu prachu, ktorý môže brániť prúdeniu vzduchu a chladeniu. Používajte stlačený vzduch alebo mäkkú kefku.
• Skontrolujte hadičky: Skontrolujte hadičku, či nie je zalomená, netesná alebo poškodená.
• Monitorovať teploty: Use monitoring software to keep an eye on your CPU temperatures. Significant increases may indicate a need for further inspection or cleaning.
• Teplovodná pasta: While not frequently required, reapplying thermal paste every few years can help maintain optimal thermal transfer.

7. Riešenie problémov

If you encounter issues with your Aigo AC SE 360 Water Cooler, refer to the following common problems and solutions:

8. Špecifikácie

9. Záruka a podpora

The Aigo AC SE 360 Water Cooler comes with a 12-mesačná záruka od dátumu nákupu. Táto záruka sa vzťahuje na výrobné chyby za bežných podmienok používania.

For technical support, warranty claims, or any questions not covered in this manual, please contact your retailer or the Aigo customer support team. Please have your proof of purchase and product model number (ACSE360) ready when contacting support.