FULODE MIX-8 8-Channel Professional Audio Mixer Sound Board Console Instruction Manual

1. Úvod

This manual provides detailed instructions for the FULODE MIX-8 8-Channel Professional Audio Mixer Sound Board Console. Please read this manual thoroughly before operating the device to ensure proper usage and to maximize its performance and longevity. The MIX-8 is designed for various audio applications, including live performances, studio recording, and DJ events, offering versatile connectivity and sound processing capabilities.

2. Bezpečnostné informácie

• Elektrická bezpečnosť: Always connect the power adapter to a grounded outlet. Do not expose the unit to rain or moisture. Do not remove covers; refer servicing to qualified personnel.
• Vetranie: Zabezpečte dostatočné vetranie okolo jednotky, aby ste predišli prehriatiu.
• umiestnenie: Place the mixer on a stable, flat surface. Avoid placing it near heat sources or in direct sunlight.
• Čistenie: Na čistenie používajte mäkkú, suchú handričku. Nepoužívajte tekuté čistiace prostriedky ani aerosóly.
• Napájanie: Use only the specified power supply (AC 90-240V, 50-60Hz).

3. Obsah balenia

Upon unboxing your FULODE MIX-8, please verify that all the following items are included:

• FULODE MIX-8 Audio Mixer Console
• Napájací adaptér
• Používateľská príručka (tento dokument)

4. Produkt skončilview

The FULODE MIX-8 is an 8-channel professional audio mixer equipped with a 99-bit DSP digital processor, USB and Bluetooth connectivity, and 48V phantom power. It features individual 3-band equalization for each channel and a 7-band master equalization for comprehensive sound control.

Obrázok: Zhora nadol view of the FULODE MIX-8 8-channel audio mixer, displaying all knobs, faders, and input/output ports.

4.1 Rozloženie predného a zadného panela

Image: Detailed diagram of the FULODE MIX-8 mixer's front and rear panels, labeling all inputs, outputs, controls, and features.

• Vstupné kanály (1-8): Each channel features XLR/TRS combo jacks for microphone (MIC) or line-level (LINE IN) inputs.
• Fantómové napájanie (+48 V): Individual phantom power switches for condenser microphones on each channel.
• Úprava zisku: Controls input sensitivity for each channel.
• 3-pásmový EQ: High, Mid, and Low frequency adjustments for each channel.
• Pan Balance: Upravuje stereo pozíciu kanála.
• AUX Adjustment: Controls the amount of signal sent to auxiliary outputs.
• Channel Mute Switch: Mutes individual channels.
• Channel Volume Pusher: Fader for individual channel volume control.
• Digital Multi-Effects (DSP FX): Built-in 99 DSP effects with program selection and parameter adjustment.
• 7-pásmový stereo grafický ekvalizér: Master EQ for overall sound shaping.
• USB/MP3 prehrávač: Digital display for U disk playback, with controls for play/pause, song switching, and mode selection.
• Bluetooth pripojenie: Wireless connection for audio input from smart devices.
• Hlavné výstupy (Ľ/P): XLR and 6.5mm (1/4") jack outputs for connecting to ampzvlhčovače alebo napájané reproduktory.
• Výstup pre slúchadlá: Na monitorovanie zvuku.
• Power Switch & Interface: Located on the rear panel.

5. Nastavenie

5.1 Pripojenie napájania

1. Uistite sa, že hlavný vypínač mixéra je v polohe VYPNUTÉ.
2. Connect the provided power adapter to the mixer's power interface on the rear panel.
3. Plug the power adapter into a suitable AC 90-240V, 50-60Hz power outlet.
4. Zapnite mixér pomocou vypínača.

Obrázok: Zadná strana view of the FULODE MIX-8 mixer, showing the power input, power switch, and serial number label.

5.2 Vstupné pripojenia

The MIX-8 supports various input types:

• Mikrofóny: Connect XLR microphones to the XLR inputs on channels 1-8. For condenser microphones, activate the +48V phantom power switch for the respective channel.
• Zariadenia na úrovni linky: Pripojte nástroje (napr. klávesy, gitary) s predzosilňovačomamps) or other audio devices using 1/4" TRS or TS cables to the LINE IN inputs.
• Prehrávanie USB: Vložte USB kľúč do USB portu pre prehrávanie MP3.
• Bluetooth: Pair your smart device via Bluetooth for wireless audio input.

Image: Close-up of the FULODE MIX-8 mixer's input section, showing XLR and 1/4 inch jack connections for microphones and line-level devices, with phantom power indicators.

5.3 Výstupné pripojenia

• Hlavné výstupy: Connect the XLR or 6.5mm (1/4") MAIN OUT jacks to your ampzosilňovač, aktívne reproduktory alebo nahrávacie rozhranie.
• Výstup pre slúchadlá: Pre monitorovanie pripojte slúchadlá do konektora PHONES.

6. Návod na obsluhu

6.1 Ovládanie kanálov

Each input channel (1-8) has dedicated controls:

• ZISK: Adjust this knob to set the input level for the connected device. Aim for a strong signal without clipping (distortion).
• EQ (vysoký, stredný, nízky): Use these three knobs to adjust the treble, midrange, and bass frequencies of the individual channel.
• AUX: Controls the amount of signal sent to the auxiliary output.
• FX: Adjusts the amount of signal sent to the internal DSP effects processor.
• PAN: Positions the channel's sound in the stereo field (left to right).
• ZTLUMIŤ: Press the MUTE button to silence the channel. The corresponding LED will illuminate when muted.
• Fader kanála: Adjusts the overall volume level of the individual channel.

Image: Close-up of the FULODE MIX-8 mixer's channel controls, showing individual gain, EQ, AUX, FX, PAN knobs, and mute buttons.

6.2 DSP Effects (FX)

The MIX-8 features 99 built-in DSP effects. To select and apply effects:

1. Use the PROGRAM knob to scroll through the 99 available effects, displayed on the digital screen.
2. Stlačením gombíka PROGRAM potvrďte svoj výber.
3. Adjust the FX knob on each channel to send the desired amount of signal to the effects processor.
4. Use the dedicated FX return fader to control the overall volume of the applied effects.

Image: Close-up of the FULODE MIX-8 mixer's digital multi-effects section, showing the display, program knob, and FX level controls.

6.3 7-Band Stereo Graphic Equalizer

The master 7-band graphic equalizer allows for fine-tuning the overall output sound:

• Adjust the faders for each frequency band (e.g., 63Hz, 150Hz, 400Hz, 1KHz, 2.5KHz, 6.4KHz, 12KHz) to boost or cut specific frequencies in the main mix.

Image: Close-up of the FULODE MIX-8 mixer's 7-band stereo graphic equalizer, showing the faders for frequency adjustment.

6.4 Prehrávanie a nahrávanie z USB/MP3

The integrated USB player supports MP3 files and can also function as a sound card for PC recording:

• Prehrávanie: Insert a USB flash drive. Use the MENU button to navigate, and the Play/Pause/Switch songs buttons for control.
• PC nahrávanie: Connect the mixer to a computer via USB. The mixer will be recognized as an audio interface, allowing you to record the mixed output directly to your computer.

Image: The FULODE MIX-8 mixer connected to a laptop via USB for recording and playback, with a USB drive inserted.

6.5 Bezdrôtové pripojenie Bluetooth

Ak chcete pripojiť zariadenie Bluetooth:

1. Press the MODE button on the USB/MP3 player section until "BT" or "Bluetooth" is displayed.
2. On your smart device, search for "BT-5.0" or a similar device name and pair.
3. Once connected, audio from your device will play through the mixer. Use the mixer's controls to adjust volume and effects.

Image: Bluetooth connectivity with the FULODE MIX-8 mixer, showing a smartphone connected wirelessly.

6.6 Monitorovanie

Use the PHONES output and its dedicated volume control to monitor the main mix through headphones.

7. Údržba

• Čistenie: Povrch mixéra pravidelne utierajte mäkkou, suchou handričkou. Nepoužívajte abrazívne čistiace prostriedky ani rozpúšťadlá.
• Ochrana proti prachu: Keď mixážny pult nepoužívate, majte ho zakrytý, aby ste predišli hromadeniu prachu, ktorý môže ovplyvniť fadery a gombíky.
• Ukladací priestor: Store the mixer in a cool, dry place away from extreme temperatures and humidity.
• Správa káblov: Ensure all cables are neatly organized and not under tension to prevent damage to ports.

8. Riešenie problémov

• Žiadny zvukový výstup:
  • Skontrolujte všetky pripojenia napájania a uistite sa, že mixér je zapnutý.
  • Verify that main output faders and channel faders are raised.
  • Ensure no channels are muted (check MUTE LEDs).
  • Confirm that input devices are properly connected and producing a signal.
  • Skontrolujte pripojenia k reproduktorom/amplifiers and their power/volume.
• Hum or Hissing Noise:
  • Uistite sa, že všetky káble sú bezpečne pripojené a nie sú poškodené.
  • Skontrolujte, či sa nevyskytujú uzemňovacie slučky; skúste pripojiť všetky audio zariadenia k rovnakej predlžovacej zásuvke.
  • Reduce gain levels on channels and main output if the noise is excessive.
  • Ensure phantom power is only activated for condenser microphones.
• Žiadne pripojenie Bluetooth:
  • Ensure the mixer is in Bluetooth mode (BT displayed).
  • Check that your smart device's Bluetooth is enabled and within range (approx. 33ft).
  • Skúste zrušiť párovanie a znova spárovať zariadenie.
• Problémy s prehrávaním z USB:
  • Ensure the USB drive is formatted correctly and contains compatible MP3 files.
  • Skúste inú jednotku USB.

9. Špecifikácie

10. Záruka a podpora

FULODE products are manufactured to high-quality standards. For warranty information, please refer to the specific terms provided at the time of purchase or contact FULODE customer support. In case of any issues or questions regarding your MIX-8 mixer, please contact the FULODE Official Shop directly for assistance.

Note: Any operation error may cause the device to have no sound. Please refer to the troubleshooting section or contact support if issues persist.

11. Oficiálne video o produkte