ERYUE LED Motorcycle Tail Light with Integrated Turn Signals User Manual

1. Úvod

Thank you for choosing the ERYUE LED Motorcycle Tail Light with Integrated Turn Signals. This product is designed to enhance visibility and safety for your motorcycle. It features a super bright LED tail light with integrated running, brake, and sequential turn signal functions. This manual provides essential information for proper installation, operation, and maintenance of your new tail light.

This tail light is a direct replacement for various Yamaha models, including YZF R3, R25, Y15ZR, MT07, FZ07, and LC150.

2. Bezpečnostné informácie

Please read all safety warnings and instructions carefully before installation and use. Failure to follow these instructions may result in electrical shock, fire, and/or serious injury.

• Pred vykonávaním akýchkoľvek elektrických prác vždy odpojte batériu motocykla.
• Uistite sa, že všetky pripojenia sú bezpečné a riadne izolované, aby ste predišli skratom.
• If you are unsure about the installation process, consult a qualified motorcycle technician.
• Produkt žiadnym spôsobom neupravujte, pretože by to mohlo viesť k zrušeniu záruky a ohrozeniu bezpečnosti.
• This product is designed for 12V DC motorcycle electrical systems only.

3. Obsah balenia

Po otvorení balíka skontrolujte, či sú všetky položky prítomné a nepoškodené.

• 1 x ERYUE LED Motorcycle Tail Light with Integrated Turn Signals

Note: Additional tools and wiring connectors may be required for installation and are not included.

4. Nastavenie a inštalácia

This tail light features an easy plug-and-play installation with an included sub-harness. However, basic mechanical and electrical knowledge is recommended.

4.1 Potrebné nástroje (nie sú súčasťou balenia)

• Sada skrutkovačov (Phillips a plochý)
• Sada nástrčných kľúčov
• Odizolovacie/krimpovacie kliešte na drôty (ak je potrebné zapojenie na mieru)
• Elektrická páska alebo zmršťovacia bužírka

4.2 Kroky inštalácie

1. Pripravte si motocykel:

   Park the motorcycle on a stable, level surface. Turn off the ignition and remove the key. Disconnect the negative terminal of the motorcycle battery to prevent accidental electrical shorts during installation.
2. Access the Existing Tail Light:

   Locate and remove any fairings, seats, or panels necessary to access the existing tail light assembly and its wiring. Refer to your motorcycle's service manual for specific instructions on removing these components.

3. Remove the Old Tail Light:

   Unplug the wiring harness from the existing tail light. Unscrew or unbolt the old tail light from its mounting points and carefully remove it.

   

   Image 1: ERYUE LED Tail Light installed on a motorcycle, displaying the running light function.
4. Install the New ERYUE Tail Light:

   Position the new ERYUE LED Tail Light into the mounting location. Secure it using the original screws or bolts. Ensure it is firmly seated and aligned correctly.

   

   Obrázok 2: Predná strana view of the ERYUE LED Tail Light, highlighting the smoked lens design.

5. Pripojte kabeláž:

   Connect the included sub-harness to the new tail light and then to the motorcycle's existing wiring harness. The plug-and-play design should make this straightforward. Ensure the connectors click into place securely.

   Wiring Color Code (Typical):

   • Čierna: Zem (-)
   • červená: Brake Light (+)
   • zelená: Running Light (+)
   • Žltá: Left Turn Signal (+)
   • modrá: Right Turn Signal (+)

   Note: Actual wire colors on your motorcycle may vary. Always verify with a multimeter or your motorcycle's wiring diagram if unsure.

   

   Obrázok 3: Zadná časť view of the ERYUE LED Tail Light, showing the integrated wiring harness.

6. Otestujte svetlá:

   Reconnect the motorcycle battery. Turn on the ignition and test all functions: running light, brake light, left turn signal, and right turn signal. Ensure all lights illuminate correctly and the sequential turn signals operate as expected.

   

   Image 4: ERYUE LED Tail Light displaying the bright red brake light function.
   

   Image 5: ERYUE LED Tail Light with the amber sequential turn signal illuminated.

7. Znovu zložiť:

   Once all functions are verified, carefully reassemble any removed fairings, seats, or panels.

5. Návod na obsluhu

The ERYUE LED Motorcycle Tail Light operates automatically with your motorcycle's electrical system.

• Running Light: When the motorcycle's ignition is on and headlights are activated, the tail light will illuminate with a low-brightness red light.
• Brzdové svetlo: When the brake lever or pedal is applied, the tail light will illuminate with a high-brightness red light. It also features a stop alert function, where the brake light flashes 3 times rapidly when the brakes are first applied, then remains solid.
• Smerovky: When the left or right turn signal switch is activated, the corresponding side of the tail light will illuminate with sequential amber LEDs, indicating the direction of the turn.

6. Údržba

The ERYUE LED Motorcycle Tail Light is designed for durability and requires minimal maintenance.

• Čistenie: Vyčistite šošovku jemným damp cloth and mild soap. Avoid abrasive cleaners or solvents that could damage the plastic lens.
• Kontrola: Periodically check the tail light for any signs of damage, loose connections, or moisture ingress. Ensure all mounting hardware remains secure.
• Hydroizolácia: The product has an IPX66 waterproof rating, meaning it is protected against powerful water jets. However, avoid submerging the light. Ensure all seals and connections are intact after installation.

7. Riešenie problémov

If you encounter issues with your ERYUE LED Motorcycle Tail Light, refer to the following common problems and solutions:

8. Špecifikácie

Detailed technical specifications for the ERYUE LED Motorcycle Tail Light.

9. Záruka a podpora

ERYUE products are manufactured to high-quality standards. For warranty information and customer support, please refer to the retailer where you purchased this product or visit the official ERYUE webstránky.

Pre prípadné reklamácie si uschovajte doklad o kúpe.