Flashpoint Wave Commander II Camera Release Cable User Manual

1. Úvod

This manual provides instructions for the proper setup, operation, and maintenance of the Flashpoint Wave Commander II Camera Release Cable. This accessory is designed to provide remote shutter control and intervalometer functions for compatible cameras equipped with a Canon Sub-Mini Connector.

Pred použitím produktu si dôkladne prečítajte tento návod, aby ste zaistili bezpečnú a efektívnu prevádzku.

2. Produkt skončilview

The Flashpoint Wave Commander II Camera Release Cable is a durable and reliable accessory that connects to your camera's remote port. It facilitates remote shutter release, reducing camera shake for sharper images, and offers advanced functions such as an intervalometer for time-lapse photography and a self-timer when used with a compatible remote unit.

Obrázok 1: Flashpoint Wave Commander II Camera Release Cable. This image shows the cable with its connectors, designed for remote camera control.

Medzi kľúčové vlastnosti patrí:

• Rozšírený dosah: A 3-foot cable length allows for remote operation, preventing camera shake.
• Vylepšená stabilita: Eliminates vibrations caused by direct shutter button presses.
• Odolná konštrukcia: Built for regular use and reliable performance.
• Multifunkčné: Enables remote shutter release, intervalometer, or self-timer functions when paired with a compatible remote unit.

3. Kompatibilita

This cable is compatible with cameras featuring a Canon Sub-Mini Connector. Verified compatible camera models include, but are not limited to:

• Canon R6 II, R7, T7, R6, R, SX70, 90D, T8i, R10, RP, SL3, RP, G1X Mark III, 80D
• Fujifilm X-T5, FUJIFILM X-T30 II, FUJIFILM X-T4, FUJIFILM GFX 100S

For other camera models, please verify the connector type before use.

4. Nastavenie

Follow these steps to connect the Wave Commander II Camera Release Cable to your camera:

1. Locate the Remote Port: Identify the remote control terminal on your camera. This is typically a small port, often labeled with a remote control icon or "REMOTE". For Canon cameras, this is the Sub-Mini Connector port.
2. Pripojte kábel: Gently insert the connector end of the Wave Commander II cable into the camera's remote port. Ensure it is fully seated to establish a secure connection.
3. Connect to Remote Unit (if applicable): If using with a separate remote trigger unit (e.g., Flashpoint Wave Commander II remote), connect the other end of the cable to the designated port on the remote unit.
4. Zapnutie: Turn on your camera and the remote unit (if applicable).

The cable is now ready for operation.

5. Návod na obsluhu

Once connected, the Wave Commander II cable enables various remote control functions:

5.1. Remote Shutter Release

• Stlačte napoly: Press the shutter button on your remote unit (or the cable's integrated button, if present) halfway down to activate autofocus and metering, similar to pressing the camera's shutter button halfway.
• Úplná tlač: Press the shutter button fully down to trigger the camera's shutter and capture a photograph.
• Režim žiarovky: For long exposures in Bulb mode, press and hold the shutter button on the remote unit. Release the button to end the exposure. Some remote units may have a lock function for extended Bulb exposures.

5.2. Intervalometer / Self-Timer Functions

When used with a compatible remote unit that features intervalometer or self-timer capabilities, the cable transmits these commands to the camera. Refer to your remote unit's specific manual for detailed instructions on setting up time-lapse sequences, delayed shots, or continuous shooting modes.

6. Údržba

To ensure the longevity and optimal performance of your Wave Commander II Camera Release Cable, follow these maintenance guidelines:

• Ukladací priestor: Kábel skladujte na chladnom a suchom mieste mimo dosahu priameho slnečného žiarenia a extrémnych teplôt. Vyhnite sa silnému navíjaniu alebo ostrému ohýbaniu kábla, ktoré môže poškodiť vnútorné vodiče.
• Čistenie: Use a soft, dry cloth to wipe the cable and connectors. Do not use liquid cleaners, solvents, or abrasive materials.
• Manipulácia: Pri pripájaní alebo odpájaní kábla vždy uchopte kryt konektora. Neťahajte priamo za samotný kábel.
• Kontrola: Pravidelne kontrolujte kábel, či nejaví známky opotrebovania, rozstrapkania alebo poškodenia konektorov. Ak spozorujete poškodenie, prestaňte ho používať.

7. Riešenie problémov

If you encounter issues with your Wave Commander II Camera Release Cable, consider the following:

• Cable Not Responding:
  • Ensure the cable is securely connected to both the camera and the remote unit (if applicable).
  • Verify that the camera and remote unit are powered on.
  • Check camera settings to ensure remote control is enabled, if applicable.
  • Test with another compatible camera or remote unit if available, to isolate the issue.
• Prerušované pripojenie:
  • Inspect connectors for dirt, dust, or damage. Clean gently with a dry, soft brush if necessary.
  • Ensure the cable is not strained or bent at sharp angles during use.
• Camera Shake Still Occurs:
  • While the cable reduces shake from pressing the shutter, other factors like tripod stability or wind can still cause movement. Ensure your camera setup is stable.

If problems persist, contact Flashpoint customer support for further assistance.

8. Špecifikácie

9. Záruka a podpora

Specific warranty information for the Flashpoint Wave Commander II Camera Release Cable is not provided in this document. For details regarding warranty coverage, technical support, or service inquiries, please contact Flashpoint customer service directly or refer to the official Flashpoint webstránky.

Uschovajte si doklad o kúpe ako doklad o kúpe pre prípadné reklamácie.