EchoMaster FCTP-MB1903

EchoMaster FCTP-MB1903 Blind Spot Mirror Camera Kit User Manual

For 2019+ Mercedes Sprinter Vehicles

1. Úvod

This manual provides essential information for the proper installation, operation, and maintenance of your EchoMaster FCTP-MB1903 Blind Spot Mirror Camera Kit. Please read this manual thoroughly before attempting any installation or operation to ensure correct usage and to prevent damage to the product or vehicle. This kit is designed specifically for 2019 and newer Mercedes-Benz Sprinter vehicles equipped with a factory 7-inch or 10.25-inch display radio.

2. Produkt skončilview

2.1 Kľúčové vlastnosti

  • Factory-matched side mirror caps for seamless integration.
  • Camera activation synchronized with left and right turn signals.
  • Capability to integrate additional cameras into the system.
  • Optimalizované viewing angle of 80 degrees for enhanced blind spot visibility.
  • Weatherproof rated cameras (IP67) for durability in various conditions.
  • Low light sensitivity of 0.1 Lux.
  • Automatic reverse camera activation when reverse gear is engaged (if installed).
  • Speed-controlled front camera activation (if installed).

2.2 Obsah balenia

Overte, či sú v balení všetky nižšie uvedené komponenty:

  • Two (2) factory matching mirror caps.
  • Two (2) weatherproof rated cameras (IP67).
  • Two (2) camera extension harnesses.
  • One (1) intelligent 4-camera integration module.
  • One (1) warranty card.
  • One (1) detailed installation manual.

2.3 Product Components Visuals

Two black factory-matched side mirror caps for a Mercedes Sprinter.
Image 1: The two factory-matched side mirror caps, designed to replace the original mirror housings on a Mercedes Sprinter.
Detailný záber view of a camera integrated into the side of a black mirror cap.
Obrázok 2: Podrobný view of one of the weatherproof cameras seamlessly integrated into the side of a black mirror cap, showing its discreet placement.
Side mirror cap with integrated camera installed on a vehicle, showing the camera lens facing outwards.
Image 3: The blind spot camera system installed on a Mercedes Sprinter, illustrating how the camera is positioned within the mirror cap to provide an optimal viewing uhol.

3. Bezpečnostné informácie

  • Odporúča sa profesionálna inštalácia: Due to the complexity of vehicle electrical systems and the precise nature of camera calibration, professional installation by a qualified technician is strongly recommended.
  • Odpojiť napájanie: Always disconnect the vehicle's battery before beginning any electrical installation to prevent short circuits or damage.
  • Zapojenie: Ensure all wiring is routed safely, away from moving parts, heat sources, and sharp edges. Use appropriate connectors and insulation.
  • Testovanie: After installation, thoroughly test all functions of the camera system and vehicle systems to ensure proper operation before driving.
  • Driving Responsibility: This camera system is an aid for safe driving and does not replace the driver's responsibility to check mirrors, blind spots, and surroundings manually. Always drive cautiously and be aware of your environment.
  • Podmienky prostredia: While cameras are weatherproof, extreme conditions (heavy rain, snow, fog) may temporarily impair visibility. Clean camera lenses regularly.

4. Nastavenie a inštalácia

The EchoMaster FCTP-MB1903 kit is designed for integration with 2019+ Mercedes-Benz Sprinter vehicles that have a factory 7-inch or 10.25-inch display radio. Detailed, step-by-step installation instructions are provided in the dedicated Návod na inštaláciu included with your kit. Please refer to that document for comprehensive guidance.

4.1 Kľúčové aspekty inštalácie

  • Kompatibilita vozidla: Confirm your Mercedes Sprinter is a 2019 model year or newer and has the specified factory display radio.
  • Mirror Cap Replacement: The installation involves replacing the factory side mirror caps with the new camera-integrated caps.
  • Pripojenia káblov: The camera extension harnesses connect the cameras to the intelligent 4-camera integration module. The module then interfaces with the vehicle's existing display system.
  • Umiestnenie modulu: Securely mount the integration module in a dry, accessible location within the vehicle cabin, away from heat and moisture.
  • Testovanie: After all connections are made, perform a thorough test of the system as outlined in the Installation Manual to ensure all cameras activate correctly with turn signals, reverse gear, and any optional front camera inputs.

5. Návod na obsluhu

Once installed, the EchoMaster FCTP-MB1903 system operates largely automatically, integrating seamlessly with your vehicle's existing controls.

5.1 Turn Signal Activated Cameras

  • Keď ľavé smerové svetlo is activated, the display will automatically switch to show the view from the left blind spot camera.
  • Keď pravé smerové svetlo is activated, the display will automatically switch to show the view from the right blind spot camera.
  • Fotoaparát view will typically remain active for a short period after the turn signal is disengaged, or until the vehicle speed exceeds a certain threshold, depending on system configuration.

5.2 Reverse Gear Activation

  • If a reverse camera is installed and connected to the integration module, engaging spiatočka will automatically trigger the display to show the rear camera view.

5.3 Optional Front Camera Activation

  • If an optional front camera is installed, its activation may be speed-controlled, meaning it could activate automatically at low speeds (e.g., for parking maneuvers) and deactivate above a certain speed. Refer to the Installation Manual for specific details on front camera operation if applicable.

6. Údržba

To ensure optimal performance and longevity of your EchoMaster FCTP-MB1903 Blind Spot Mirror Camera Kit, follow these simple maintenance guidelines:

  • Čistenie objektívu fotoaparátu: Regularly inspect and clean the camera lenses on the mirror caps. Use a soft, damp cloth and mild soap solution if necessary. Avoid abrasive cleaners or materials that could scratch the lens.
  • Kontrola elektroinštalácie: Periodically check visible wiring for any signs of wear, fraying, or damage. Ensure all connections remain secure.
  • Mirror Cap Condition: Inspect the mirror caps for any physical damage. While durable, impacts can affect camera alignment or housing integrity.
  • Aktualizácie softvéru: If available, consult the EchoMaster website or your installer for any potential firmware updates for the integration module.

7. Riešenie problémov

If you encounter issues with your camera system, refer to the following common problems and solutions:

ProblémMožná príčinaRiešenie
No camera image on display.Loose wiring connection; power issue; incorrect module settings; faulty camera.Check all wiring connections to the module and cameras. Verify power supply to the module. Consult the Installation Manual for module settings. If problem persists, contact customer support.
Obraz je skreslený alebo bliká.Poor connection; electrical interference; damaged cable.Ensure all video cables are securely connected. Check for sources of electrical interference. Inspect cables for damage.
Camera does not activate with turn signal.Incorrect turn signal input wiring; module configuration issue.Verify turn signal input connections to the integration module as per the Installation Manual. Check module settings.
Fotoaparát view je rozmazaný alebo nejasný.Dirty lens; condensation; damaged lens.Objektív fotoaparátu čistite mäkkou handričkouamp cloth. Allow time for condensation to clear. If lens is damaged, contact customer support.

For issues not covered here, or if troubleshooting steps do not resolve the problem, please contact EchoMaster customer support or your professional installer.

8. Špecifikácie

FunkciaŠpecifikácia
Číslo modeluFCTP-MB1903
Kompatibilné vozidlá2019+ Mercedes-Benz Sprinter with factory 7" or 10.25" display radio
Fotoaparát Viewing uhol80 stupňov (skutočný uhol View)
Hodnotenie odolnosti kamery voči poveternostným vplyvomIP67
Low Light Sensitivity0.1 Lux
Technológia optických senzorovCMOS
Veľkosť optického senzora1/3 palca
Typ objektívuŠirokouhlý, pevný
Typ konektoraRCA
Rozmery produktu15 x 8 x 8 inches (Packaging/Kit)
Hmotnosť položky4 libry
FarbaČierna
VýrobcaEchoMaster

9. Informácie o záruke

Your EchoMaster FCTP-MB1903 Blind Spot Mirror Camera Kit is covered by a limited warranty. Please refer to the Záručný list included in your package for specific terms, conditions, and duration of the warranty. This card contains important details regarding warranty registration, coverage, and how to make a claim.

Keep your proof of purchase and the warranty card in a safe place. Any unauthorized modification or improper installation may void the warranty.

10. Zákaznícka podpora

For technical assistance, installation questions, or warranty inquiries, please contact EchoMaster customer support. You can typically find contact information on the EchoMaster webna stránke alebo na záručnom liste dodanom s vaším produktom.

When contacting support, please have your product model number (FCTP-MB1903) and proof of purchase readily available to expedite assistance.

© 2024 EchoMaster. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.