1. Úvod
This manual provides detailed instructions for the installation, operation, and maintenance of your ELUTENG M.2 NVMe/SATA SSD Enclosure. This device is designed to convert M.2 NVMe or SATA SSDs into a portable external storage solution, offering high-speed data transfer and broad compatibility.
2. Obsah balenia
Prosím, overte si, či sú vo vašom balíku všetky položky:
- ELUTENG M.2 NVMe/SATA SSD Enclosure
- 2-in-1 USB Type-C Cable (USB-C to USB-A and USB-C to USB-C)
- Termálna podložka
- Používateľská príručka (tento dokument)
3. Špecifikácie
| Funkcia | Popis |
|---|---|
| Model | M.2 SATA/NVME Enclosure |
| Rozhranie | USB 3.2 Gen 2 Type-C |
| Rýchlosť prenosu dát | Up to 10Gbps (NVMe SSD), Up to 5Gbps (SATA SSD) |
| Podporované typy SSD diskov | M.2 NVMe M Key / B+M Key, M.2 NGFF SATA B+M Key |
| Podporované veľkosti SSD | 2230, 2242, 2260, 2280 |
| Maximálna kapacita | 4 TB |
| Čipová súprava | RTL9210B (Supports UASP, Trim) |
| Materiál | Zliatina hliníka |
| Rozmery | Približne 4.92 x 2.83 x 0.67 palca |
| Hmotnosť | Približne 60 gramov (2.12 uncí) |
| Kompatibilita OS | Windows 7/8/10/11, Mac OS, Linux, iOS, Android |
| Kompatibilita zariadenia | PC, Smartphone, Tablet, Smart TV, Smart Router, PS4 |
4. Inštalačná príručka
4.1 Inštalácia SSD
Pri inštalácii M.2 SSD disku do krytu postupujte podľa týchto krokov:
- Otvorte kryt: Push the switch on the side of the enclosure and slide out the inner frame.
- Vložte SSD disk: Carefully insert your M.2 NVMe or SATA SSD into the slot on the inner frame, aligning it with the card position. Ensure the SSD is fully seated.
- Bezpečný SSD disk: Install the provided fixing buckle (plastic push-pin) to secure the SSD in place. Rotate it 90 degrees counter-clockwise to lock.
- Naneste tepelnú podložku: Place the thermal pad onto the SSD chips to aid in heat dissipation.
- Zatvoriť prílohu: Slide the inner frame back into the aluminum alloy shell until it clicks securely into place.
4.2 Pripojenie k zariadeniu
Use the included 2-in-1 USB Type-C cable to connect the enclosure to your computer or other compatible device. The cable supports both USB-C to USB-A and USB-C to USB-C connections.
Poznámka: For optimal performance, ensure your device has USB 3.0 or higher USB ports.
5. Návod na obsluhu
5.1 Prenos údajov
Once connected, your operating system should automatically detect the ELUTENG M.2 SSD Enclosure as an external storage device. You can then drag and drop files, or use your system's file management tools to transfer data.
- NVMe SSD: Supports transfer rates up to 10Gbps.
- SATA SSD: Supports transfer rates up to 5Gbps.
The enclosure utilizes the RTL9210B main control chip, supporting UASP (USB Attached SCSI Protocol) and Trim commands to enhance read/write efficiency and reduce CPU load.
5.2 SSD Compatibility
The enclosure supports a wide range of M.2 SSDs:
- NVMe SSDs: M Key and B+M Key.
- SATA SSDs: B+M Key (NGFF).
- Veľkosti: 2230, 2242, 2260, and 2280 form factors.
6. Údržba
6.1 Odvod tepla
The ELUTENG M.2 SSD Enclosure features an aluminum alloy shell and a bottom heat sink hole design. This construction facilitates efficient heat transfer away from the SSD, preventing overheating and maintaining optimal performance during extended use.
6.2 Čistenie
To clean the enclosure, use a soft, dry cloth. Avoid using liquid cleaners or solvents, as these may damage the finish or internal components.
7. Riešenie problémov
- Kryt nebol zistený:
- Uistite sa, že SSD disk je správne nainštalovaný a zaistený v kryte.
- Try connecting the enclosure to a different USB port on your device.
- Ak je k dispozícii, vyskúšajte s iným USB káblom.
- Ak je to možné, overte funkčnosť samotného SSD disku jeho otestovaním v inom kompatibilnom zariadení.
- For new SSDs, ensure they are initialized and formatted in your operating system's Disk Management (Windows) or Disk Utility (Mac OS).
- Pomalé prenosové rýchlosti:
- Ensure you are connected to a USB 3.0 (or higher) port on your device. Older USB 2.0 ports will significantly limit speeds.
- Confirm that your SSD is an NVMe drive for 10Gbps speeds; SATA drives will operate at up to 5Gbps.
- Close other applications that might be consuming system resources or disk I/O.
- Check the health of your SSD.
- Enclosure gets hot:
- It is normal for the aluminum alloy shell to become warm during operation, especially during heavy data transfers, as it is designed to dissipate heat from the SSD.
- Ensure the thermal pad is correctly placed on the SSD chips.
8. Oficiálne videá o produktoch
Video: M.2 NVME SSD USB Adapter SSD Enclosure. This video provides a visual overview of the ELUTENG M.2 NVME SSD USB Adapter Enclosure, demonstrating its features and design.
Video: ELUTENG M.2 NVME SATA SSD Enclosure Aluminum. This video showcases the aluminum design and dual NVME/SATA compatibility of the ELUTENG M.2 SSD Enclosure.
9. Informácie o záruke
ELUTENG products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact ELUTENG customer support.
10. Podpora
If you encounter any issues or have questions regarding your ELUTENG M.2 NVMe/SATA SSD Enclosure, please contact our customer support team. Contact information can typically be found on our official webna stránke alebo na obale produktu.