Luqeeg Digital Door Viewer Užívateľská príručka

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Luqeeg Digital Door Viewer. Please read this manual thoroughly before using the product to ensure proper function and safety. Keep this manual for future reference.

2. Vlastnosti produktu

• 2.4-palcový LCD displej: Provides a clear and vivid view of visitors at your door.
• 0.3MP Professional Camera: Captures crisp images for easy identification, even in low light conditions.
• 120° širokouhlý objektív: Ponúka široký view of your doorstep, minimizing blind spots and enhancing security.
• Odolná konštrukcia zinkovej zliatiny: Engineered for superior wear resistance and impact strength, preventing prying and smashing.
• Dvojité napájanie: Operates using either 3 x 1.5V AAA batteries (not included) or a 5V 1A USB power source for continuous operation.
• Automatická aktivácia displeja: The screen automatically displays the outside view when the doorbell is pressed, providing convenience for all users.

3. Obsah balenia

Overte, či sú v balení všetky položky:

• 1 x Digitálne dvere Viewer Camera Unit
• 1 x Digitálne dvere Viewer Monitor Unit
• 1 x Accessory Kit (includes 2 x Washers, 8 x Screws)
• 1 x Návod na použitie

Note: AAA batteries and a small memory card are not included and must be purchased separately.

4. Produkt skončilview

Familiarize yourself with the components of your Luqeeg Digital Door Viewehm.

Figure 4.1: Monitor Unit Components

• LCD obrazovka: Zobrazuje naživo view z fotoaparátu.
• Monitoring/Power On/Off Button: Press to activate the screen or power the device on/off.
• USB rozhranie: For connecting a 5V 1A USB power source.
• Malý slot pre pamäťovú kartu: Insert a memory card (not included) for potential recording features (if supported by firmware).

Figure 4.2: Monitor Unit Rear View (Priestor pre batérie)

• Priestor na batériu: Houses 3 x AAA batteries (not included).

5. Inštalačná príručka

The Luqeeg Digital Door Viewer is designed for simple installation, fitting standard door peephole holes without requiring special tools.

5.1 Príprava

• Ensure your door has an existing peephole or a suitable hole for installation.
• Gather necessary components: Camera unit, Monitor unit, washers, and screws.
• Prepare 3 x AAA batteries (not included) or a 5V 1A USB power source.

5.2 Kroky inštalácie

Obrázok 5.1: Inštaláciaview

1. Step 1: Remove Existing Peephole (if applicable)
   Carefully unscrew and remove any existing traditional peephole from your door.
2. Step 2: Insert Camera Unit
   From the outside of the door, insert the camera unit through the peephole hole. Ensure the camera is facing outwards and is flush with the door surface.
3. Step 3: Secure Monitor Unit
   From the inside of the door, connect the cable from the camera unit to the monitor unit. Align the monitor unit with the camera unit and secure it to the door using the provided screws and washers. Ensure the monitor is firmly attached and stable.

5.3 Napájanie zariadenia

• Batéria: Open the battery compartment on the back of the monitor unit and insert 3 x AAA batteries, observing correct polarity.
• Výkon USB: Connect a 5V 1A USB power adapter (not included) to the USB interface on the side of the monitor unit. This can serve as a backup or primary power source.

6. Návod na obsluhu

6.1 Zapnutie/vypnutie

• Zapnutie: Press and hold the Monitoring/Power On/Off button located below the LCD screen until the screen illuminates.
• Vypnutie: Press and hold the Monitoring/Power On/Off button until the screen turns off.

6.2 Viewnávštevníkov

• manuál View: Press the Monitoring/Power On/Off button once to activate the screen and view the outside area. The screen will automatically turn off after a short period of inactivity to conserve power.
• Automaticky View: When someone presses your doorbell (if connected and compatible, or if the device detects motion/sound, depending on model features), the screen will automatically activate and display the outside view.

Obrázok 6.1: Viewing a Visitor

6.3 Memory Card Usage (Optional)

If your model supports recording and you have inserted a small memory card into the slot:

• Refer to the on-screen menu or additional documentation for specific instructions on how to initiate recording, view playback, or manage stored footage.

7. Údržba

• Čistenie: Na čistenie obrazovky a objektívu fotoaparátu používajte mäkkú, suchú handričku. Nepoužívajte abrazívne čistiace prostriedky ani rozpúšťadlá.
• Výmena batérie: When the battery indicator shows low power, replace all 3 AAA batteries simultaneously. Do not mix old and new batteries.
• Podmienky prostredia: Dbajte na to, aby zariadenie nebolo vystavené extrémnym teplotám, priamemu slnečnému žiareniu po dlhšiu dobu alebo nadmernej vlhkosti.

8. Riešenie problémov

9. Špecifikácie

10. Podpora

For any questions, technical assistance, or support regarding your Luqeeg Digital Door Viewer, please refer to the contact information provided with your purchase or visit the official Luqeeg website. Our customer support team is available to assist you.