Stalwart Digital Wall Safe Instruction Manual

Úvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Stalwart Digital Wall Safe, Model 83-DT5915-SM. Please read this manual thoroughly before use to ensure proper functionality and security.

The Stalwart Digital Wall Safe is designed to protect valuable items such as cash, jewelry, documents, and passports. Its robust construction and digital keypad offer a secure and convenient storage solution for your home or office.

Obsah produktu

Pred pokračovaním v inštalácii skontrolujte, či sú všetky komponenty prítomné:

• 1 x Stalwart Digital Wall Safe (Model 83-DT5915-SM)
• 2 x núdzové kľúče
• 4 x AA batérie (súčasť balenia)
• Montážny materiál (skrutky)
• Návod na použitie (tento dokument)

Obrázok: Detailný záber view of the safe's digital keypad, emergency keyhole, and secure deadbolts, along with the two manual override keys.

Špecifikácie

Image: Diagram illustrating the external and internal dimensions of the Stalwart Digital Wall Safe.

Nastavenie

1. Inštalácia batérie

The safe requires 4 AA batteries for the electronic lock to function. The battery compartment is located inside the safe door.

1. Open the safe door using the emergency override key (refer to "Using Emergency Keys" if needed).
2. Nájdite kryt priehradky na batérie na vnútornej strane dvierok.
3. Remove the cover and insert 4 AA batteries, ensuring correct polarity (+/-).
4. Nasaďte kryt priehradky na batérie.

Obrázok: Interný view of the safe door, highlighting the battery compartment and reset button location.

2. Počiatočné nastavenie prístupového kódu

Upon first use or after battery replacement, you will need to set your personal passcode.

1. With the safe door open, locate the red reset button on the inside of the door, near the battery compartment.
2. Press the red reset button. You will hear a beep, and the yellow indicator light on the keypad will illuminate.
3. Within 5 seconds, enter your desired 3-8 digit passcode on the keypad.
4. Press the "#" button to confirm your new passcode. You will hear a confirmation beep.
5. Pred zatvorením dverí otestujte nový prístupový kód s otvorenými dverami.

Dôležité: Keep your passcode confidential and store the emergency keys in a secure location away from the safe.

3. Montážny návod

This wall safe is designed for installation between standard wall studs (typically 16 inches on center).

1. Vyberte miesto: Choose a discreet and secure location within a wall, ensuring there are no electrical wires, plumbing, or other obstructions behind the wall.
2. Mark Opening: Carefully measure and mark the opening required for the safe body. The external dimensions are 12.5"D x 6"W x 8.75"H. Ensure the opening is slightly larger than the safe body for a snug fit.
3. Vystrihnutý otvor: Using appropriate tools, cut the marked opening in the drywall or other wall material.
4. Vložte trezor: Carefully slide the safe body into the prepared opening. The front flange of the safe should sit flush against the wall surface.
5. Bezpečný trezor: Use the provided mounting bolts to secure the safe to the wall studs. There are pre-drilled holes inside the safe for this purpose. Ensure the safe is firmly attached and stable.

Image: The Stalwart Digital Wall Safe shown installed flush within a wall, with an inset showing the mounting bolts and the digital keypad.

Návod na obsluhu

1. Opening the Safe with Digital Passcode

1. Zadajte svoj 3-8-miestny prístupový kód na klávesnici.
2. Press the "#" button.
3. If the passcode is correct, the green indicator light will illuminate, and you will hear a beep.
4. Do 5 sekúnd otočte gombík v smere hodinových ručičiek, aby ste otvorili dvierka trezoru.

Poznámka: If an incorrect passcode is entered three times consecutively, the safe will lock for 20 seconds. Further incorrect attempts will increase the lockout duration.

2. Zmena prístupového kódu

You can change your passcode at any time while the safe door is open.

1. With the safe door open, press the red reset button on the inside of the door. The yellow indicator light will illuminate.
2. Enter your new 3-8 digit passcode.
3. Press the "#" button to confirm. You will hear a confirmation beep.
4. Pred zatvorením dverí otestujte nový prístupový kód s otvorenými dverami.

3. Používanie núdzových tlačidiel pre nastavenie

The emergency override keys provide manual access to the safe in case of forgotten passcode, battery failure, or electronic malfunction.

1. Locate the keyhole cover on the digital keypad panel.
2. Odstráňte kryt.
3. Vložte jeden z núdzových kľúčov do kľúčovej dierky a otočte ním proti smeru hodinových ručičiek.
4. Zatiaľ čo držíte kľúč otočený, otočte gombík v smere hodinových ručičiek, aby ste otvorili dvierka trezoru.
5. Once the door is open, remove the key.

POZOR: Do not store the emergency override keys inside the safe.

Údržba

1. Výmena batérie

When the batteries are low, the red indicator light on the keypad may flash or the safe may not respond to passcode entry. Replace all 4 AA batteries promptly to ensure continuous operation.

1. Open the safe using your passcode or an emergency key.
2. Odstráňte kryt priestoru pre batérie.
3. Replace all four old AA batteries with new ones, observing correct polarity.
4. Vymeňte kryt.
5. Test the safe operation.

Poznámka: Replacing batteries does not erase your programmed passcode.

2. Upratovanie

Pre zachovanie vzhľadu a funkčnosti vášho trezoru:

• Vonkajšie a vnútorné povrchy utrite mäkkou handričkouamp plátno.
• Nepoužívajte abrazívne čistiace prostriedky alebo rozpúšťadlá, pretože môžu poškodiť povrchovú úpravu alebo elektronické súčiastky.
• Ensure the keypad and lock mechanism are free from dust and debris.

Riešenie problémov

Záruka a podpora

For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact Stalwart customer service directly. Keep your purchase receipt as proof of purchase.

Výrobca: Globálna ochranná známka

Model: 83-DT5915-SM

UPC: 197315280927