Maxxima Horizontal LED Step Light Instruction Manual

1. Produkt skončilview

The Maxxima Horizontal LED Step Light (Model MEW-SW203B-02) is designed to provide efficient and adjustable illumination for indoor and outdoor stairways, pathways, and decks. This fixture features a 3 CCT (Correlated Color Temperature) selectable switch, allowing users to choose between 3000K (Warm White), 4000K (Neutral White), and 5000K (Daylight) to suit various lighting preferences and environments. Its durable aluminum construction and IP65 rating ensure suitability for wet, dampalebo na suchých miestach.

Obrázok 1: Predná strana view of the Maxxima Horizontal LED Step Light in black finish.

2. Bezpečnostné informácie

• POZOR: Nebezpečenstvo úrazu elektrickým prúdom. Pred inštaláciou alebo servisom odpojte napájanie pomocou poistky alebo ističa.
• Tento produkt musí byť inštalovaný v súlade s platným inštalačným predpisom osobou oboznámenou s konštrukciou a prevádzkou produktu a súvisiacimi rizikami.
• Uistite sa, že všetky elektrické pripojenia sú bezpečné a v súlade s miestnymi predpismi a nariadeniami.
• Neinštalujte toto zariadenie mokrými rukami alebo stojac na mokrom čiamp povrchy.
• This fixture is designed for 120VAC operation. Do not connect to any other voltage.
• Neupravujte zariadenie ani ho nepoužívajte na iné účely, ako je jeho určené.

3. Obsah balenia

Pred začatím inštalácie skontrolujte, či sú všetky komponenty prítomné:

• Maxxima Horizontal LED Step Light Unit (2-Pack)
• Montážny materiál (skrutky, matice)
• Návod na použitie (tento dokument)

Obrázok 2: Rozložené view showing the step light components, including the faceplate and internal module.

4. Špecifikácie

5. Návod na inštaláciu

Skôr ako začnete: Ensure power is turned OFF at the circuit breaker or fuse box to avoid electrical shock. If you are unsure about electrical wiring, consult a qualified electrician.

1. Pripravte si rozvodnú skrinku: Ensure you have a standard one-gang junction box installed in the desired location.
2. Pripojiť vedenie:
   • Pripojte čierna drôt z príslušenstva k horúce (black) wire from the junction box.
   • Pripojte biela drôt z príslušenstva k neutrálny (white) wire from the junction box.
   • Pripojte zelená drôt z príslušenstva k zem (green or bare copper) wire from the junction box.
   Secure all connections with the provided wire nuts.
3. Vyberte teplotu farieb (CCT): Before mounting, locate the CCT selection switch on the back of the light module. Slide the switch to your desired color temperature: 3000K (Warm White), 4000K (Neutral White), or 5000K (Daylight).

   Figure 3: Back of the light module with CCT selection switch (3000K/4000K/5000K).
4. Mount the Light Module: Carefully tuck the wires into the junction box. Align the light module with the junction box and secure it using the provided mounting screws.
5. Attach the Faceplate: Once the module is securely mounted, snap or screw the decorative faceplate onto the light module.
6. Obnoviť napájanie: Turn the power back ON at the circuit breaker or fuse box. Test the light to ensure proper operation.

Figure 4: Maxxima LED Step Light installed on a staircase wall.

Inštalačný video sprievodca

Video 1: This video demonstrates the components of the Maxxima Horizontal LED Step Light, how to select the color temperature (3000K, 4000K, 5000K) using the switch, and the final appearance of the light installed.

6. Návod na obsluhu

The Maxxima Horizontal LED Step Light operates by simply turning on the power at the wall switch connected to the fixture. The chosen color temperature (3000K, 4000K, or 5000K) will illuminate once power is supplied. The CCT setting is selected during installation and remains constant until manually changed.

Figure 5: Close-up of the step light emitting warm white light (3000K).

7. Údržba

The LED step light requires minimal maintenance. To clean the fixture:

• Ensure power is OFF before cleaning.
• Vonkajší povrch utrite mäkkou handričkouamp plátno.
• Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Periodically check for any loose connections or damage to the wiring, especially for outdoor installations.

8. Riešenie problémov

If the LED step light is not functioning correctly, refer to the following common issues and solutions:

• Svetlo sa nerozsvieti:
  • Check if the power supply is ON at the circuit breaker.
  • Verify that all wire connections are secure and correctly made (hot to hot, neutral to neutral, ground to ground).
  • Uistite sa, že zariadenie prijíma správny objemtage (120VAC).
• Svetlo bliká alebo stlmuje:
  • Skontrolujte uvoľnené pripojenia vodičov.
  • Ensure the fixture is not connected to a dimmer switch unless explicitly rated for dimming (this model is not specified as dimmable).
  • Overte stabilné napájanie.
• Nesprávna teplota farieb:
  • Vypnite napájanie zariadenia.
  • Remove the faceplate and module to access the CCT selection switch.
  • Adjust the switch to the desired setting (3000K, 4000K, or 5000K).
  • Reassemble and restore power.

If issues persist after following these steps, contact Maxxima customer support.

9. Záruka a podpora

This Maxxima Horizontal LED Step Light is covered by a 3-ročná záruka od dátumu nákupu. Táto záruka sa vzťahuje na chyby materiálu a spracovania pri bežnom používaní.

For warranty claims, technical support, or any questions regarding your product, please contact Maxxima customer service. Keep your purchase receipt as proof of purchase.

Kontaktné informácie: Refer to the Maxxima webNajaktuálnejšie kontaktné údaje nájdete na webovej stránke alebo v dokumentácii k nákupu.