1. Úvod
Welcome to the world of high-fidelity audio with your new Pro-Ject T1 EVO BT Turntable. This manual provides essential information for setting up, operating, and maintaining your turntable to ensure optimal performance and longevity. The T1 EVO BT combines classic analog sound with modern Bluetooth connectivity, offering a versatile listening experience.
Image: The Pro-Ject T1 EVO BT Turntable in Gloss Black, showcasinjeho elegantný dizajn a hlavné komponenty.
2. Bezpečnostné pokyny
Please read these instructions carefully before using the turntable. Keep this manual for future reference.
- Napájanie: Only use the power supply provided with the unit. Ensure the voltage zodpovedá vášmu miestnemu napájaniu.
- Voda a vlhkosť: Do not expose the turntable to rain, moisture, or excessive humidity. Avoid placing liquid-filled objects on the unit.
- Zdroje tepla: Keep the unit away from direct sunlight, radiators, heat registers, stoves, or other heat-producing appliances.
- Vetranie: Zabezpečte riadne vetranie. Neblokujte žiadne vetracie otvory.
- Čistenie: Disconnect the unit from the power supply before cleaning. Use a soft, dry cloth. Avoid liquid cleaners.
- servis: Nepokúšajte sa o servis zariadenia sami. Všetky opravy zverte kvalifikovanému servisnému personálu.
- umiestnenie: Place the turntable on a stable, level surface to prevent vibrations and ensure proper operation.
3. Čo je v krabici
Po vybalení sa uistite, že sú všetky nižšie uvedené položky prítomné a v dobrom stave:
- Prachový kryt
- Plstená rohož
- Zdroj
- High-quality phono/line RCA cable
- Pro-Ject T1 EVO BT Turntable Unit
- Pre-adjusted Ortofon OM10 cartridge (pre-installed on tonearm)
4. Nastavenie
Follow these steps to set up your Pro-Ject T1 EVO BT Turntable:
- umiestnenie: Choose a stable, level surface away from direct sunlight, heat sources, and strong vibrations.
- Inštalácia taniera: Carefully place the heavy, low-resonance glass platter onto the spindle. Ensure it sits flush.
- Inštalácia pásu: Gently stretch the drive belt around the sub-platter and the motor pulley. Rotate the platter a few times manually to ensure the belt is correctly seated.
- Cartridge & Tonearm: The Ortofon OM10 cartridge is pre-adjusted. Ensure the tonearm is unlocked from its rest.
- Protiprachový kryt: Attach the adjustable hinge dust cover to protect your turntable from dust.
- Spojenia:
- Connect the high-quality phono/line RCA cable to your amplifier's phono input (for MM cartridges) or line input, depending on your setup and whether you use the internal preamp.
- Connect the ground wire from the turntable to your ampuzemňovacia svorka záchranára.
- Connect the power supply to the turntable and then to a wall outlet.
Image: Close-up of the Bluetooth switch, indicating its location for activation.
Obrázok: Podrobný view of the RCA Line and Phono outputs, showing connectivity options.
Image: A close-up of the Ortofon OM10 cartridge mounted on the tonearm, highlighting its design.
General Turntable Setup Guide (External Video)
For a visual guide on general turntable setup, including platter, belt, counterweight, and tonearm balancing, please refer to this video. While this video features a different brand, the fundamental setup principles are widely applicable to many turntables, including your Pro-Ject T1 EVO BT.
Video: A general guide demonstrating the initial setup steps for a turntable, including component installation and tonearm adjustments. This video is provided by Fluance Audio and offers universal setup principles.
5. Obsluha gramofónu
- Zapnutie: Zapnite gramofón pomocou vypínača.
- Vyberte rýchlosť: Use the electronic speed change control to select 33 or 45 RPM, matching your record's speed.
- Záznam o mieste: Opatrne položte vinylovú platňu na tanier.
- Spustiť prehrávanie: Gently lift the tonearm using the cueing lever and position it over the desired track. Lower the cueing lever to drop the stylus onto the record. The turntable is fully automatic and can also be started with a dedicated start button, which will automatically move the tonearm and lower the stylus.
- Zastaviť prehrávanie: At the end of the record, the tonearm will automatically return to its rest. You can also manually lift the tonearm or press the stop button for automatic return.
6. Pripojenie Bluetooth
The Pro-Ject T1 EVO BT features Bluetooth 5.0 with aptX HD for high-quality wireless audio streaming.
- Aktivujte Bluetooth: Ensure your turntable is powered on. Locate the Bluetooth switch/button (refer to image in Setup section) and activate it. The indicator light should start blinking, indicating pairing mode.
- Párovanie: On your Bluetooth-enabled device (e.g., wireless speakers, headphones), enable Bluetooth and search for available devices. Select "Pro-Ject T1 BT" (or similar) from the list.
- Potvrdenie pripojenia: Once successfully paired, the Bluetooth indicator light on the turntable will turn solid.
- Prehrávanie: Start playing a record, and the audio will stream wirelessly to your connected Bluetooth device.
7. Údržba
- Protiprachový kryt: Keep the dust cover closed when not in use to protect the turntable from dust and debris. Clean the dust cover with a soft, damp plátno.
- Čistenie dotykového pera: Pravidelne čistite dotykové pero mäkkou kefkou určenou na čistenie dotykového pera, pričom ho jemne kefujte zozadu dopredu.
- Čistenie záznamov: Use a carbon fiber brush or a record cleaning solution to keep your vinyl records free of dust and static, which can affect sound quality and stylus life.
- Turntable Surface: Wipe the turntable chassis with a soft, dry cloth. Avoid abrasive cleaners.
8. Riešenie problémov
| Problém | Možná príčina | Riešenie |
|---|---|---|
| Žiadne napájanie/žiadny zvuk | Power cable disconnected; Amplifier input incorrect; Internal preamp switch incorrect. | Check power connections. Ensure RCA cable is connected to the correct input (Phono for internal preamp OFF, Line for internal preamp ON). Verify internal preamp nastavenie prepínača. |
| Preskakovanie záznamov | Turntable not level; Dirty stylus/record; Damaged stylus. | Ensure turntable is on a level surface. Clean stylus and record. Replace stylus if damaged. |
| Bluetooth sa nepripája | Gramofón nie je v režime párovania; Zariadenie je príliš ďaleko; Rušenie. | Ensure Bluetooth is activated and blinking on turntable. Move device closer. Reduce interference from other wireless devices. |
| Sub-platter not spinning | Belt dislodged or broken; Motor issue. | Check and re-seat the drive belt. If the problem persists, contact support. |
9. Špecifikácie
- Rozmery produktu: 13.19 x 4.33 x 16.34 palca
- Hmotnosť položky: 8.8 libier (4 kilogramov)
- Číslo modelu položky: 9120129864800
- Značka: Pro-Ject
- Maximálna rýchlosť otáčania: 45 otáčok za minútu
- Materiál: Aluminum, Glass, Plastic/Metal (Cartridge)
- štýl: T1 Evo BT
- Farba: Lesklá čierna
- Kompatibilné zariadenia: Headphone, Laptop, Personal Computer, Smartphone, Speaker
- Typ motora: Pohon na opasok
- Bezdrôtový zvuk: Bluetooth 5.0 with aptX HD
- Preamp: Internal, Switchable, Compatible with Multiple Inputs
- Included Cartridge: Pre-Adjusted Ortofon OM10
- Rameno: 8.6" Single-Piece Aluminum
- Podvozok: CNC-Machined, No Hollow Spaces
- remeselné spracovanie: Ručne vyrobené v Európe
10. Záruka a podpora
Informácie o záruke a technickú podporu získate od oficiálneho dodávateľa audio systémov Pro-Ject. webalebo kontaktujte autorizovaného predajcu. Uschovajte si doklad o kúpe pre prípad reklamácie.
Online podpora: Navštívte Obchod Pro-Ject na Amazone pre ďalšie zdroje a kontaktné informácie.