Návod na obsluhu stĺpikového svetla RAB Lighting B17 LED

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of the RAB Lighting B17 LED Bollard Light. This outdoor luminaire features field-adjustable wattage and selectable color temperature (CCT), designed for various outdoor applications.

Medzi kľúčové vlastnosti patrí:

• Energy-efficient LED with a 50,000-hour lifespan.
• Nastaviteľný wattage: 24W, 19W, or 14W.
• Selectable CCT: 3000K (Warm White), 4000K (Neutral White), or 5000K (Cool White).
• 0-10V dimming capability.
• UL uvedené pre vlhké miesta.
• Durable metal construction with a glass shade.

Figure 1: RAB Lighting B17 LED Bollard Light (Model B17D shown).

2. Bezpečnostné informácie

POZOR: Riziko úrazu elektrickým prúdom. Pred inštaláciou alebo servisom odpojte napájanie. Inštaláciu by mal vykonať kvalifikovaný elektrikár v súlade so všetkými platnými národnými a miestnymi elektrotechnickými predpismi.

• Zabezpečte prívod objtage je pre upínací prípravok správne.
• Do not handle live components.
• Noste vhodné osobné ochranné prostriedky (OOP).
• This fixture is suitable for wet locations. Ensure all connections are properly sealed to prevent water ingress.
• Neupravujte zariadenie. Akékoľvek úpravy môžu zrušiť platnosť záruky a predstavovať bezpečnostné riziká.

3. Obsah balenia

Pred začatím inštalácie skontrolujte, či sú všetky komponenty prítomné:

• B17 LED Bollard Light Fixture
• On-Off Switch (Included Components)
• Installation Hardware (e.g., mounting bolts, gaskets) - (Assumed, not explicitly listed but typical for such products)
• Návod na použitie (tento dokument)

4. Nastavenie a inštalácia

Follow these steps for proper installation of the B17 LED Bollard Light:

1. Pripravte miesto inštalácie: Ensure the mounting surface is stable and level. Run electrical conduit and wiring to the desired location according to local codes.
2. Odpojiť napájanie: Pred začatím akýchkoľvek elektrických prác vypnite napájanie ističom.
3. Mount the Bollard: Secure the bollard base to the mounting surface using appropriate hardware. Ensure a watertight seal if required by local codes.
4. Vykonajte elektrické pripojenia: Connect the fixture's wires to the supply wires. Follow standard wiring practices:
   • Black to Line (L)
   • White to Neutral (N)
   • Green/Ground to Ground (G)
   • Purple to Dimming (+) (for 0-10V dimming)
   • Gray to Dimming (-) (for 0-10V dimming)
   Uistite sa, že všetky pripojenia sú bezpečné a izolované.
5. Vyberte Wattage a CCT: Before closing the fixture, adjust the wattage and CCT switches located inside the fixture head. Refer to Section 5 for details.
6. Secure the Fixture Head: Attach the fixture head to the bollard body, ensuring all seals are properly seated to maintain the wet location rating.
7. Obnoviť napájanie: Turn on power at the circuit breaker and test the light.

Figure 2: The B17 Bollard Light is UL Listed and rated for wet locations, ensuring durability in outdoor environments.

5. Návod na obsluhu

5.1. Field-Adjustable Wattage

The B17 bollard light allows you to select the desired wattage output to optimize brightness and energy consumption. A switch located inside the fixture head enables selection between 24W, 19W, and 14W.

• 24 W: Maximálny jas.
• 19 W: Medium brightness, reduced energy use.
• 14 W: Lower brightness, maximum energy savings.

Ak chcete upraviť: Disconnect power. Open the fixture head. Locate the wattage selection switch and move it to the desired setting. Close the fixture head and restore power.

5.2. Selectable Color Temperature (CCT)

The fixture offers three color temperature options to suit different aesthetic preferences and applications. A separate switch inside the fixture head allows selection between 3000K, 4000K, and 5000K.

• 3000K: Warm White, ideal for creating a cozy and inviting atmosphere.
• 4000K: Neutral White, suitable for general illumination and task lighting.
• 5000K: Cool White, provides bright, crisp light, often used for security or modern aesthetics.

Ak chcete upraviť: Disconnect power. Open the fixture head. Locate the CCT selection switch and move it to the desired setting. Close the fixture head and restore power.

Figure 3: Visual representation of adjustable wattage and selectable CCT settings.

5.3. 0-10V Dimming

The B17 bollard light is compatible with 0-10V dimming systems. Connect the purple and gray dimming wires to a compatible 0-10V dimmer control. This allows for smooth adjustment of light output from 100% down to 10% (or lower, depending on dimmer specifications).

Ensure the dimmer is rated for LED loads and is compatible with 0-10V dimming protocols.

6. Údržba

The B17 LED Bollard Light is designed for minimal maintenance due to its long LED lifespan of 50,000 hours.

• Čistenie: Pravidelne čistite vonkajší povrch zariadenia mäkkou handričkouamp handričkou odstráňte nečistoty a úlomky. Nepoužívajte abrazívne čistiace prostriedky ani rozpúšťadlá. Pred čistením sa uistite, že je zariadenie vypnuté.
• Kontrola: Annually inspect the fixture for any signs of damage, loose connections, or wear. Ensure all seals remain intact to maintain weather resistance.
• Výmena LED: LEDs are integrated and not user-replaceable. The long lifespan minimizes the need for replacement.

Figure 4: The B17 LED Bollard Light offers a long 50,000-hour operational lifespan.

7. Riešenie problémov

8. Špecifikácie

9. Záruka a podpora

For warranty information and technical support, please contact RAB Lighting directly. Refer to the official RAB Lighting webKonkrétne záručné podmienky a kontaktné údaje nájdete na webovej stránke alebo v dokumentácii k nákupu.

RAB Lighting Contact: www.rablighting.com