MAIMEIMI Universal Motorcycle Digital Speedometer Gauge

1. Produkt skončilview

The MAIMEIMI Universal Motorcycle Digital Speedometer Gauge is a multi-functional instrument designed for motorcycles. It provides real-time data including speed, engine RPM, gear indication, odometer readings, oil level, and steering indicators. This gauge cluster offers integrated data monitoring for various riding conditions.

Obrázok 1.1: Predná strana view of the MAIMEIMI Universal Motorcycle Digital Speedometer Gauge.

Kľúčové vlastnosti:

• Integrovaný displej: Shows speed, tachometer (RPM), 1-6 gear indicator, odometer (ODO/TRIP), oil level, and steering indicators.
• Adjustable Tire Size: Compatible with various tire sizes, adjustable from 40" to 118".
• Široký rozsah rýchlostí: Speed display range of 0-199 MPH.
• Rozsah tachometra: 0-12 (x1000r/min).
• Sledovanie najazdených kilometrov: Cumulative mileage (ODO) 0-999999 KM/MILES, subtotal mileage (TRIP) 0.0-999.9 KM/MILES.
• Alarm nízkej hladiny oleja: Flashing outer frame and indicator light when oil level is below the alarm value.
• Vodotesný dizajn: Constructed from high-quality ABS material with an epoxy resin sealed LCD screen for clear visibility in various weather conditions.
• Univerzálna kompatibilita: Suitable for most 1/2 cylinder motorcycle engines with a 12V DC voltage systém.

Image 1.2: The speedometer installed on a motorcycle, showing its integration.

2. Obsah balenia

Overte si, či sú vo vašom balení všetky nižšie uvedené položky:

• 1 x Motorcycle Speedometer
• 1 x Speed Sensor
• 1 x montážna konzola
• 1 x Installation Instruction (Electronic version available upon request)

3. Technické špecifikácie

Image 3.1: Detailed dimensions of the speedometer gauge.

4. Nastavenie a inštalácia

Installation of the speedometer requires basic electrical knowledge. If you are unsure, consult a professional motorcycle mechanic.

4.1 Schéma zapojenia

Refer to the following diagram for proper wiring connections. Ensure all connections are secure and insulated to prevent short circuits.

Image 4.1: Wiring connections for the speedometer and speed sensor.

Main Connector (9-pin):

• Čierna: IGN+ (Ignition Positive)
• modrá: Diaľkové svetlo
• zelená: Power supply (Ground)
• fialová: Normal current+
• Yellow & White: Hladina oleja
• oranžová: Turn left signal
• Blue & White: Rýchlostný signál
• hnedá: Podsvietenie
• Svetlo modrá: Turn right signal

Speed Sensor Connector (3-pin):

• červená: Speed signal +
• zelená: Speed signal -
• Žltá: Speed signal +
• Čierna: Signal (Output)

Gear Indicator Connector (6-pin):

• Ružová: 1. prevodový stupeň
• Modro-červená: 2. prevodový stupeň
• Green & Black: 3. prevodový stupeň
• Yellow & Red: 4. prevodový stupeň
• Brown & White: 5. prevodový stupeň
• Green & Red: Neutrálne
• Sivý drôt: 6. prevodový stupeň

4.2 Tire Circumference Adjustment

The speedometer's accuracy depends on correct tire circumference settings. The adjustable range is 40"-118". Consult your motorcycle's manual for the exact tire circumference or measure it accurately. The adjustment procedure is typically performed during initial setup via the button on the gauge.

5. Návod na obsluhu

5.1 Funkcie displeja

The digital display provides comprehensive information at a glance:

Image 5.1: Labeled interface display showing various indicators and readings.

• Rýchlosť: Digital display in MPH or KM/H.
• tachometer: Analog dial (x1000 RPM) and digital display.
• Indikátor prevodového stupňa: Displays current gear (1-6) or Neutral (N).
• Počítadlo kilometrov (ODO): Celkový najazdený počet najazdených kilometrov.
• Trip Meter (TRIP): Resettable mileage for individual trips.
• Hladina oleja: Bar graph indicator.
• Turn Indicators: Left and Right arrows illuminate.
• High Beam Indicator: Symbol illuminates when high beams are active.
• Neutral Gear Indicator: 'N' symbol illuminates when in neutral.
• Palivový alarm: Flashing icon when fuel level is low.

5.2 Unit Switching and Display Modes

The single button on the gauge allows for switching between different display modes and units.

Image 5.2: Visual representation of unit and display mode switching.

• Switching Speed Units (MPH/KM/H): After the instrument panel is activated, press and hold the button for 3-5 seconds. The speed unit will automatically switch.
• Toggling Odometer/Trip Meter: A short press of the button will toggle between the ODO (cumulative mileage) and TRIP (subtotal mileage) readings.

5.3 Low Oil Alarm Function

The speedometer is equipped with a low oil alarm. If the oil level falls below a predetermined threshold, the outer frame of the digital display will flash, and the dedicated empty oil indicator light will illuminate to alert the rider.

Image 5.3: Display clarity in both daytime and nighttime conditions.

6. Starostlivosť a údržba

6.1 Vodotesnosť

The MAIMEIMI motorcycle speedometer is designed with good waterproof performance. The high-quality ABS material and epoxy resin sealed LCD screen allow for normal operation even in rainy weather. However, avoid prolonged submersion or high-pressure water jets directly on the unit.

Image 6.1: The speedometer demonstrating its waterproof capabilities.

6.2 Všeobecná starostlivosť

• Clean the display and housing with a soft, damp plátno.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the display or housing.
• Uistite sa, že všetky spoje zostávajú pevné a bez korózie.
• Periodically check the mounting bracket for security.

7. Riešenie problémov

Ak sa vyskytnú problémy s rýchlomerom, zvážte nasledujúce bežné kroky na riešenie problémov:

• Bez napájania/displeja: Check all wiring connections, especially the power supply (Green wire for ground, Black wire for IGN+). Ensure the motorcycle's battery is charged and providing 12V DC.
• Nesprávne čítanie rýchlosti: Verify the tire circumference setting is correct. Check the speed sensor wiring (Blue & White wire) and ensure the sensor is properly installed and functioning.
• Tachometer Not Working: Ensure the tachometer signal wire (if applicable and connected) is correctly wired.
• Gear Indicator Issues: Check the wiring for each gear signal. Ensure the gear sensor on your motorcycle is functioning correctly.
• Oil Level Indicator Malfunction: Check the Yellow & White wire connection to the oil level sensor. Ensure the oil level sensor itself is working.
• Indicators (Turn/High Beam) Not Working: Verify the Orange (Left Turn), Light Blue (Right Turn), and Blue (High Beam) wires are correctly connected to their respective motorcycle circuits.

If these steps do not resolve the issue, it is recommended to seek assistance from a qualified motorcycle technician or contact MAIMEIMI customer support.

8. Podpora a pomoc

For further assistance or if you have questions regarding the installation or operation of your MAIMEIMI Universal Motorcycle Digital Speedometer Gauge, please refer to the following:

• Elektronický manuál: If a physical user manual was not included in your package, an electronic version can be requested from MAIMEIMI customer support.
• Odborná pomoc: For complex installation or troubleshooting, it is advisable to consult with experienced maintenance personnel or a certified motorcycle mechanic.
• Contact MAIMEIMI: For direct support, please reach out to MAIMEIMI customer service through the platform where the product was purchased.