1. Úvod
The TRACEABLE Jumbo Calibrated Digital Fridge/Freezer Thermometer (Model AO-94460-73) is designed for precise temperature monitoring in refrigerators, freezers, water baths, heating blocks, and incubators. This device simultaneously displays current, minimum, and maximum temperatures, offering a comprehensive overview of environmental conditions. Its built-in memory stores temperature data, and programmable alarms provide alerts for critical temperature deviations.
Kľúčové vlastnosti:
- Simultaneous display of current, minimum, and maximum temperatures.
- Built-in memory for tracking temperature conditions over time.
- Precise high and low temperature alarms, adjustable in 1° increments.
- Submersible temperature probe with a 10-ft (3-m) micro-cable.
- Multiple mounting options: hook-and-loop strips, wall-mount slots, or flip-open stand.
- NIST-traceable calibration certificate included.
2. Obsah balenia
Overte, či sú všetky nižšie uvedené položky prítomné a v dobrom stave:
- TRACEABLE Jumbo Calibrated Digital Fridge/Freezer Thermometer (Model AO-94460-73)
- 1 5-mL Bottle Probe (submersible)
- Kalibračný certifikát s údajmi nadväzujúcimi na NIST
- Hook-and-loop strips for mounting
- Magnetic strips for mounting
- Jedna AAA alkalická batéria
3. Nastavenie
3.1. Inštalácia batérie
- Nájdite priehradku na batérie na zadnej strane jednotky.
- Odstráňte kryt priestoru pre batérie.
- Insert the supplied AAA alkaline battery, ensuring correct polarity (+/-).
- Bezpečne nasaďte kryt priestoru pre batérie.
3.2. Umiestnenie sondy
The bottle probe is designed to buffer rapid temperature changes, providing a more stable and accurate reading of the stored contents. The 10-ft (3-m) micro-cable allows the probe to be placed inside the monitored environment while the main unit remains outside.
- Place the bottle probe inside the refrigerator, freezer, or other environment where temperature monitoring is required. Ensure the probe is positioned to accurately reflect the temperature of the items being stored.
- The micro-cable is thin enough to allow refrigerator or freezer doors to close without damaging the cable or compromising the seal.
Image: A person placing a bottle probe inside a refrigerator, demonstrating proper probe placement.
3.3. Montáž hlavnej jednotky
The main thermometer unit can be mounted in several ways:
- Hook-and-Loop Strips: Attach the adhesive-backed hook-and-loop strips to the back of the unit and a clean, flat surface (e.g., side of a refrigerator, wall).
- Magnetic Strips: Use the magnetic strips for attachment to metallic surfaces.
- Wall-Mount Slots: Utilize the integrated slots on the back of the unit to hang it on screws or hooks.
- Flip-Open Stand: For benchtop use, extend the integrated stand on the back of the unit.
Image: A hand pressing a button on the TRACEABLE thermometer, which is mounted on the exterior of a refrigerator.
4. Návod na obsluhu
4.1. Zapnutie/vypnutie
The unit powers on automatically upon battery installation. There is no dedicated power button. To turn off, remove the battery.
4.2. Meranie teplôt
The large LCD display shows three temperature readings simultaneously:
- Aktuálna teplota: The real-time temperature measured by the probe.
- Minimálna teplota (MIN): Najnižšia teplota zaznamenaná od posledného resetovania.
- Maximálna teplota (MAX): Najvyššia zaznamenaná teplota od posledného resetovania.
4.3. Prepínanie jednotiek teploty (°F/°C)
Stlačte tlačidlo °F/°C button (if available, or a similar labeled button) to toggle between Fahrenheit and Celsius temperature scales.
4.4. Viewing and Clearing Min/Max Memory
The thermometer automatically records the minimum and maximum temperatures reached since the last memory reset. These values are continuously displayed.
- To clear the MIN/MAX memory and begin a new recording cycle, press the CLEAR button. The display will show the current temperature for MIN and MAX until new minimum and maximum values are recorded.
4.5. Nastavenie budíkov
The thermometer features programmable high and low temperature alarms. An alarm will sound when the temperature exceeds the high set point or falls below the low set point. The alarm continues to sound even if the temperature returns to the non-alarm range until acknowledged.
- Stlačte tlačidlo SET tlačidlo pre vstup do režimu nastavenia budíka.
- Použite UP a DOLE arrow buttons to adjust the desired high temperature alarm limit.
- Stlačte tlačidlo SET again to confirm the high limit and proceed to set the low temperature alarm limit.
- Použite UP a DOLE arrow buttons to adjust the desired low temperature alarm limit.
- Stlačte tlačidlo SET a third time to exit alarm setting mode and save the settings.
- To enable or disable the alarm, press the ALARM ZAPNUTÝ / VYPNUTÝ button. An alarm icon will typically appear on the display when the alarm is active.
- To silence a sounding alarm, press any button. The alarm will reactivate if the temperature remains outside the set limits.
5. Údržba
5.1. Upratovanie
Regular cleaning helps maintain the accuracy and longevity of your thermometer.
- Wipe the main unit and probe with a damp cloth. A mild soap solution can be used if necessary.
- Do not use abrasive cleaners or solvents, as these may damage the plastic casing alebo displej.
- Ensure the main unit does not get wet, as it is not waterproof. The probe is submersible.
5.2. Výmena batérie
When the display becomes dim or the unit stops functioning, it is time to replace the battery. Refer to Section 3.1 for battery installation instructions.
5.3. Starostlivosť o sondu
The bottle probe is designed for durability. Avoid sharp bends or kinks in the cable, which could damage the internal wiring. The probe is freezer safe and can remain in the monitored environment continuously.
6. Riešenie problémov
If your thermometer is not functioning as expected, please refer to the following common issues and solutions:
| Problém | Možná príčina | Riešenie |
|---|---|---|
| Žiadny alebo slabý displej | Vybitá alebo nesprávne nainštalovaná batéria | Vymeňte batériu AAA a dbajte na správnu polaritu. |
| Nesprávne údaje o teplote | Probe not properly placed or damaged | Ensure the probe is fully immersed or correctly positioned. Inspect the probe and cable for damage. |
| Alarm neznie | Alarm disabled or settings incorrect | Verify that the alarm is enabled (check for alarm icon) and that high/low limits are set appropriately. |
| MIN/MAX values not resetting | CLEAR button not pressed | Stlačte tlačidlo CLEAR button to reset the memory. |
7. Špecifikácie
| Funkcia | Detail |
|---|---|
| Číslo modelu | AO-94460-73 |
| Rozsah teplôt | −58 to 158°F (–50 to 70°C) |
| Rozlíšenie | 0.1° |
| Presnosť | ±1 °C |
| Dĺžka kábla sondy | 10 ft (3 m) micro-cable |
| Zdroj napájania | 1 x AAA alkalická batéria |
| Typ zobrazenia | Digitálny LCD |
| Špeciálna funkcia | High Accuracy, NIST-traceable calibration |
| Pokyny pre starostlivosť o výrobok | Freezer Safe (probe) |
| Možnosti montáže | Hook-and-loop, Magnetic, Wall-mount, Benchtop stand |
8. Záruka
This TRACEABLE product is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. This warranty does not cover damage caused by accident, misuse, abuse, alteration, or improper operation. If service is required during the warranty period, please contact customer support.
9. Zákaznícka podpora
For technical assistance, warranty claims, or general inquiries, please contact TRACEABLE customer support. Refer to the contact information provided with your purchase documentation or visit the official TRACEABLE webnajaktuálnejšie informácie o podpore nájdete na stránke.
Online zdroje:
- Navštívte ZISTIŤ webstránky for product information, FAQs, and additional resources.
