Procolored F13 Panda DTF Printer User Manual

1. Úvod

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Procolored F13 Panda DTF Printer. Please read this manual thoroughly before using the printer to ensure optimal performance and longevity.

Figure 1: Procolored F13 Panda DTF Printer.

2. Bezpečnostné informácie

Vždy dodržiavajte nasledujúce bezpečnostné opatrenia, aby ste predišli zraneniu alebo poškodeniu tlačiarne:

• Uistite sa, že tlačiareň je umiestnená na stabilnom a rovnom povrchu.
• Pripojte tlačiareň k uzemnenej elektrickej zásuvke so správnym napätímtage (AC 100-230V).
• Nevystavujte tlačiareň vode ani nadmernej vlhkosti.
• Počas prevádzky držte ruky mimo pohyblivých častí.
• Use only recommended inks and cleaning solutions.
• Uchovávajte mimo dosahu detí.

3. Obsah balenia

Overte, či sú v balení všetky položky:

• Procolored F13 DTF Printer
• Roll Film 13"
• DTF Ink Set (CMYK+WW)
• Nozzle Protection Fluid
• DTF Powder
• Plastová podpera
• Dátový kábel (USB)
• Napájací kábel
• Moisturizing Device
• Odpadová fľaša
• Náplň
• Spare Ink Tube
• Valčeková konzola
• Atramentová podložka
• Stierač
• Nôž na rezanie
• USB dongle
• Striekačka
• Skrutkovač
• Roller Bar
• Predlžovacia trubica
• Needle Hub
• jar
• Tampón

Figure 2: Included accessories for the Procolored F13 DTF Printer.

4. Inštalačná príručka

4.1 Rozbalenie a počiatočné umiestnenie

Carefully remove the printer and all components from the packaging. Place the printer on a sturdy, level surface in a well-ventilated area.

4.2 Film Roll Installation

Install the 13-inch DTF film roll onto the designated holder at the rear of the printer. Ensure the film feeds smoothly into the printer mechanism.

4.3 Ink System Setup

Fill the ink tanks with the corresponding DTF pigment inks (Cyan, Magenta, Yellow, Black, White, Light Cyan). Ensure the white ink circulation system is properly connected and functioning to prevent clogging.

Figure 3: Illustration of the advanced white ink system, showing circulation, siphon effect, and automatic cleaning.

4.4 Power Connection and Software Installation

Connect the power cable to the printer and a suitable power outlet. Install the Procolored RIP software (compatible with Windows 7/10/11) on your computer. Follow the on-screen instructions for software installation and driver setup.

Obrázok 4: Koniecview of the Procolored RIP software interface and available tutorials.

5. Návod na obsluhu

5.1 Preparing for Print

1. Power on the printer using the main switch.
2. Ensure the DTF film is correctly loaded and aligned.
3. Open the Procolored RIP software on your computer.
4. Import your design and adjust settings such as size, resolution (up to 1440x1440dpi), and color profile.

5.2 Proces tlače

Initiate the print job from the software. The printer will feed the film and apply ink. The built-in cutter will automatically trim the film after printing, optimizing material usage.

5.3 Post-Printing

After printing, apply DTF powder to the wet ink and cure it using a DTF oven or heat press. Once cured, the design is ready for transfer to textiles.

Obrázok 5: Pramples of versatile applications for DTF prints, including shirts, flags, tote bags, and caps.

6. Údržba

6.1 Automatický čistiaci systém

The F13 Panda DTF Printer features an automatic cleaning system that operates even when the printer is powered on. This system helps prevent print head clogs and ensures consistent print quality. Regular use of this feature is recommended.

6.2 White Ink Circulation

The printer includes a white ink circulation system with a siphon filtration diaphragm pump. This system minimizes blockages and maintains the quality of white ink. Ensure the system is always active during operation.

6.3 Všeobecné čistenie

Pravidelne čistite vonkajší povrch tlačiarne mäkkou handričkouamp cloth. Refer to the software's maintenance section for specific print head cleaning procedures if needed.

7. Riešenie problémov

Ak sa vyskytnú problémy s tlačiarňou, zvážte nasledujúce bežné riešenia:

• Problémy s kvalitou tlače: Perform a nozzle check and head cleaning through the software. Ensure ink levels are sufficient.
• Film Feeding Problems: Check for obstructions in the film path and ensure the film roll is correctly installed and aligned.
• Softvérové ​​chyby: Restart the software and the printer. Ensure your software and drivers are up to date.
• Problémy s pripojením: Verify USB cable connection and ensure the printer is powered on.

For persistent issues, contact Procolored customer service.

8. Špecifikácie

9. Záruka a podpora

Your Procolored F13 Panda DTF Printer comes with a comprehensive warranty:

• Print Head and Related Components: Six-month warranty.
• Ďalšie príslušenstvo: Jednoročná záruka.

Our dedicated customer service team is available 24/6 to address any queries or technical issues you may encounter. Please refer to your purchase documentation for specific contact details.