AMAGISN Selfie Stick Holder Holster Instruction Manual

1. Úvod a koniecview

The AMAGISN Selfie Stick Holder Holster is designed to provide a convenient and hands-free solution for mounting your selfie stick and action camera. Featuring a versatile 360° rotating holder and a secure snap-on design, it allows for easy attachment to backpack shoulder straps or waist straps, supporting both horizontal and vertical camera orientations. Its lightweight and robust construction ensures your camera is firm and secure during various activities.

Kľúčové vlastnosti:

• Easy and Convenient: Quick attachment and detachment.
• Otočenie o 360°: Allows for flexible camera positioning (horizontal or vertical).
• One-Handed Performance: Designed for ease of use while on the go.
• Firm and Secure: Patented spring clamp and silicone sleeves ensure stability.
• Lightweight Carrying: No auxiliary parts needed for secure attachment.
• Strap Adaptability: Compatible with fabric straps from 0.5mm to 10mm thickness and up to 80mm width.
• Ochrana fotoaparátu: Silicone sleeve protects your camera and selfie stick from scratches.

2. Pokyny na nastavenie

2.1 Attaching the Holder to a Strap

1. Open the selfie stick hanger by pressing the release mechanism.
2. Insert the shoulder strap or waist strap of your backpack into the open clamp.
3. Stlačte obe strany klamp firmly with your fingers to tighten the latch and secure it to the strap.
4. If the shoulder strap is particularly thick, you may need to apply additional pressure by digging under the finger grip and pressing on the top of the clamp to fully open and secure it.

2.2 Installing the Silicone Sleeve (if applicable)

The holder includes small and large inner diameter silicone sleeves to accommodate selfie sticks of various diameters. Choose the appropriate sleeve based on your selfie stick's diameter.

• Selfie Stick Diameter Under 24mm: Use the small inner diameter sleeve (approx. 24.2mm).
• Selfie Stick Diameter 24mm to 30mm: Use the large inner diameter sleeve (approx. 30.3mm).
• Selfie Stick Diameter 30mm to 33mm: No sleeve is recommended for these diameters as the holder will provide a snug fit directly.

2.3 Silicone Sleeve Replacement Steps

1. Ensure the silicone cover is oriented in the same direction as the selfie stick mount.
2. Insert the silicone sleeve into the holder.
3. Pull out any hidden parts inside the sleeve to ensure it's properly seated.
4. Confirm the installation is complete and the sleeve is secure.

3. Návod na obsluhu

3.1 Mounting Your Selfie Stick and Camera

Once the holder is securely attached to your backpack or waist strap, insert your selfie stick (with camera attached) into the holder. The holder's design allows for quick and secure attachment. Ensure the camera is facing the desired direction for shooting.

3.2 Adjusting Camera Angle and Orientation

The holder features a 360° rotating mechanism. Simply rotate your selfie stick within the holder to achieve the desired horizontal or vertical orientation and shooting angle. This allows for dynamic shots without needing to remove the camera from the mount.

3.3 Ovládanie bez použitia rúk

With your camera securely mounted, you can enjoy hands-free recording during activities such as hiking, traveling, or any outdoor adventure. This allows you to capture immersive footage while keeping your hands free for other tasks.

4. Údržba

To ensure the longevity and optimal performance of your AMAGISN Selfie Stick Holder, follow these simple maintenance guidelines:

• Čistenie: Wipe the holder and silicone sleeves with a soft, damp handričkou na odstránenie prachu a nečistôt. Nepoužívajte agresívne chemikálie alebo abrazívne materiály, ktoré by mohli poškodiť povrchy.
• Silicone Sleeve Care: The silicone sleeve is designed to protect your camera and stick from scratches. Regularly check the sleeve for any signs of wear or damage and replace if necessary to maintain optimal protection.
• Ukladací priestor: Keď držiak nepoužívate, skladujte ho na chladnom a suchom mieste mimo dosahu priameho slnečného žiarenia.
• Kontrola: Pravidelne kontrolujte clamp mechanism and rotating joint for any signs of wear or looseness. Ensure all parts are functioning correctly before each use.

5. Riešenie problémov

If you encounter any issues with your AMAGISN Selfie Stick Holder, please consider the following:

• Holder not securing firmly: Ensure the strap thickness is within the specified range (0.5mm-10mm) and that the clamp is fully closed and latched. For thicker straps, ensure you've applied enough pressure to fully engage the clamp.
• Selfie stick feels loose: Verify that you are using the correct silicone sleeve for your selfie stick's diameter. If your stick is between 30mm and 33mm, ensure it's inserted directly without a sleeve for a snug fit.
• Ťažkosti s otáčaním: Check for any obstructions or debris in the rotating mechanism. Ensure the selfie stick is inserted correctly and not binding.

Ak problémy pretrvávajú, kontaktujte zákaznícku podporu so žiadosťou o ďalšiu pomoc.

6. Špecifikácie

7. Používateľské tipy

• Overenie kompatibility: This holder is confirmed to be compatible with Insta360 Ace Pro 2, Insta360 X5, X4, X3, GoPro 13, and other selfie sticks with diameters between 24mm and 33mm. Always check your selfie stick's diameter for the best fit.
• Bezpečná príloha: Before starting any activity, always double-check that the holder is firmly clamped to your strap and that your selfie stick is securely inserted.
• Optimálny uhol: Experiment with the 360° rotation to find the best camera angle for your specific activity and desired shot.
• Cestovanie naľahko: The design allows for lightweight carrying without needing extra accessories for securing the selfie stick, making it ideal for travel.

8. Záruka a podpora

For any warranty claims, technical support, or inquiries regarding your AMAGISN Selfie Stick Holder, please contact the seller or manufacturer directly through your purchase platform. Keep your proof of purchase for any warranty-related services.