Philips S6305/00

Používateľská príručka bezdrôtového reproduktora Philips S6305/00

Model: S6305/00

1. Úvod

This manual provides essential instructions for the safe and efficient use of your Philips S6305/00 Wireless Speaker. Designed for portability and robust performance, this speaker features Bluetooth 5.0 connectivity, IPX7 waterproofing, a 20-hour battery life, and a power bank function. Please read this manual thoroughly before using your device.

2. Vlastnosti produktu

3. Začíname

3.1 Obsah balenia

3.2 Nabíjanie reproduktora

Before first use, fully charge the speaker. Connect the supplied USB charging cable to the speaker's USB-C port and to a USB power adapter (not included). The battery indicator LEDs will illuminate during charging. A full charge typically takes several hours.

3.3 Zapnutie/vypnutie

Stlačte tlačidlo Tlačidlo napájania (Power button on speaker control panel) located on the top panel to turn the speaker on or off. The speaker will automatically power off after 15 minutes of inactivity to conserve battery.

Hore view of Philips S6305/00 speaker showing control panel

Figure 1: Top control panel of the Philips S6305/00 speaker, displaying power, Bluetooth, play/pause, volume, and LED light buttons.

3.4 Párovanie Bluetooth

  1. Uistite sa, že je reproduktor zapnutý.
  2. Stlačte a podržte tlačidlo Bluetooth (Bluetooth button on speaker control panel) for a few seconds until the Bluetooth indicator light flashes, indicating pairing mode.
  3. Na svojom zariadení (smartfón, tablet atď.) povoľte Bluetooth a vyhľadajte dostupné zariadenia.
  4. Select "Philips S6305/00" from the list. Once connected, the Bluetooth indicator light will glow steadily.

3.5 Audio-In Connection

For devices without Bluetooth, connect an audio cable (not included) from your device's headphone jack to the speaker's 3.5mm audio-in port. The speaker will automatically switch to audio-in mode.

4. Návod na obsluhu

4.1 Základné ovládacie prvky

Ovládanie svetla 4.2 LED diódami

The multi-colored LED lights activate automatically when the speaker is powered on. To cycle through light modes or turn them off, press the Tlačidlo svetelného režimu (LED Light Mode button on speaker control panel) on the control panel. The speaker does not retain the last light setting; lights will be on by default upon each power cycle.

Philips S6305/00 speaker with multi-colored LED lights illuminated

Figure 2: The Philips S6305/00 speaker displaying its multi-colored LED lights, which pulsate with the music.

4.3 Using the Power Bank Function

To charge an external device, connect it to the speaker's USB-A output port using an appropriate charging cable (not included). The speaker will begin charging the connected device.

4.4 Stereo Pairing (TWS)

To achieve true wireless stereo sound, you can pair two Philips S6305/00 speakers:

  1. Uistite sa, že oba reproduktory sú zapnuté a nie sú pripojené k žiadnemu zariadeniu Bluetooth.
  2. Na jednom reproduktore (toto bude primárny reproduktor) stlačte a podržte tlačidlo Tlačidlo Stereo Pairing (often indicated by two interlocking circles or a similar icon, refer to quick start guide for exact icon).
  3. The primary speaker will search for the secondary speaker. Once connected, an audible tone will confirm the stereo pairing.
  4. Connect your device to the primary speaker via Bluetooth as described in section 3.4. Audio will now play in stereo across both speakers.

5. Údržba

5.1 Čistenie

Reproduktor utrite mäkkým, damp cloth. Do not use abrasive cleaners or solvents. Ensure the speaker is dry before charging or exposing to water.

5.2 Vodotesná starostlivosť

Always ensure the rubber cover for the charging and audio-in ports is securely sealed before exposing the speaker to water. While the speaker is IPX7 rated, direct water streams can temporarily muffle sound due to the fabric covering the speakers. Sound quality will return to normal once the fabric dries.

Philips S6305/00 speaker splashing in water, demonstrating its waterproof feature

Figure 3: The Philips S6305/00 speaker shown amidst water splashes, highlighting its IPX7 waterproof capability.

6. Riešenie problémov

ProblémMožná príčinaRiešenie
Reproduktor sa nezapne.Batéria je vybitá.Connect the speaker to a power source using the USB-C cable and charge it.
Nie je možné spárovať cez Bluetooth.Speaker is not in pairing mode; device's Bluetooth is off; speaker is already connected to another device.Ensure speaker is in pairing mode (flashing Bluetooth LED). Turn off and on your device's Bluetooth. Disconnect from other devices.
Žiadny zvuk alebo nízka hlasitosť.Volume too low on speaker or source device; incorrect input source selected.Increase volume on both speaker and source device. Ensure correct input (Bluetooth or Audio-in) is active.
Sound is muffled after water exposure.Water trapped in the speaker's fabric cover.Allow the speaker to air dry completely. Sound quality will return once the fabric is dry.
Battery level indicator is unclear.Battery indicator LEDs only show charge status when connected to power. A green flashing Bluetooth LED indicates low battery.Connect the speaker to a charger to view the current battery level. Charge when the green Bluetooth LED flashes.

7. Špecifikácie

Interné view of Philips S6305/00 speaker showing drivers and passive radiators

Obrázok 4: Interný view of the Philips S6305/00 speaker, illustrating its dual full-range drivers and passive bass radiators.

8. Záruka a podpora

Your Philips S6305/00 Wireless Speaker comes with a limited warranty. Please refer to the included Warranty Leaflet and Worldwide Warranty Leaflet for detailed terms and conditions, including coverage period and claim procedures.

For technical support, service, or further inquiries, please visit the official Philips support website or contact their customer service department. Contact information can typically be found in the warranty documentation or on the Philips brand webstránky.

Súvisiace dokumenty - S6305/00

Preview Philips DLP2711CB USB powerbanka – rýchle nabíjanie 10 000 mAh
Objavte Philips DLP2711CB, tenkú a výkonnú USB powerbanku s kapacitou 10 000 mAh. Ponúka dva porty USB-A a USB-C s rýchlym nabíjaním QC 3.0 a PD 3.0, technológiu PPS a inteligentnú ochranu pre bezpečné a efektívne napájanie.
Preview Návod na montáž Philips GreenPerform Waterproof +5 WT178C
Komplexné pokyny na montáž a technické špecifikácie pre LED svietidlo Philips GreenPerform Waterproof +5 WT178C. Podrobné informácie o vlastnostiach produktu, rozmeroch, spôsoboch inštalácie, káblových pripojeniach a údajoch o zapínacom prúde.
Preview Vodotesné puzdro na LED trubicu Philips WT050C – inštalácia a špecifikácie
Komplexný návod pre vodotesné puzdro na trubicu Philips WT050C Ledinaire. Zahŕňa technické špecifikácie, pokyny na inštaláciu, podrobnosti o rozmeroch a informácie o výmene poistiek pre LED trubice T8.
Preview Philips HearLink 2 App Návod na obsluhu: Riadenie a ovládanie
Podrobné informácie o aplikácii Philips HearLink 2, jednoduché funkcie prostredníctvom Lautstärkeregelung, Programmwechsel, Remote Fitting a Tinnitus SoundSupport pre Hörsysteme.
Preview Philips Norelco Multigroom 3000 (MG3750/60) - Často kladené otázky a používateľská príručka
Nájdite odpovede na bežné otázky týkajúce sa zastrihávača Philips Norelco Multigroom 3000 (MG3750/60) vrátane vodotesnosti, čísel modelov, symbolov, nabíjania a výmeny nadstavcov.
Preview Philips DLP1930CW 30000 мАч Внешний аккумулятор - Мощное портативное зарядное устройство
Мощный внешний аккумулятор Philips DLP1930CW емкостью 30000 мАч с 3 porty USB (USB-A a USB-C), USB быстрой зарядки PD 20 Вт a QC 3.0. Оснащен ЖК-дисплеем для отображения состояния питания и интеллектуальнымит симстения